Sharp AR-C250 (serv.man6) User Manual / Operation Manual ▷ View online
4-9
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
staple sorter (AR-SS2) and the finisher (AR-FN4).
toner, toner collecting container, and staple cartridges for the optional
staple sorter (AR-SS2) and the finisher (AR-FN4).
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
Photoconductive drum
The AR-C250 Copier has advanced process control technology
which improves copy quality uniformity. This feature stabilizes copy
quality throughout the life of the photoconductive drum by automatically
compensating for the changes in drum characteristics due to wear,
operator use patterns, and environmental conditions. The automatic
adjustments are made in response to a sensor that detects the
reflectance characteristics of the drum.
which improves copy quality uniformity. This feature stabilizes copy
quality throughout the life of the photoconductive drum by automatically
compensating for the changes in drum characteristics due to wear,
operator use patterns, and environmental conditions. The automatic
adjustments are made in response to a sensor that detects the
reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1
Store the supplies in a location that is:
●
clean and dry,
●
at a stable temperature,
●
not exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
●
Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.
curl or become damp, resulting in paper misfeeds.
5-1
CHAPTER
5
CHAPTER 5
COPIER TROUBLE?
This chapter describes how to remove misfed originals and paper and
other common trouble remedies.
other common trouble remedies.
Page
●
●
●
●
●
MISFEED REMOVAL
...............................
5-2
●
●
●
●
●
MAINTENANCE REQUIRED
........................
5-11
●
●
●
●
●
TONER COLLECTING CONTAINER OF TRANSFER UNIT
..
5-12
●
●
●
●
●
TROUBLESHOOTING
.............................
5-13
5-2
CHAPTER
5
Misfeed in the optional RADF
When the optional RADF misfeeds an original sheet, the copier will
stop and the misfeed message will appear.
stop and the misfeed message will appear.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message “
The message “
MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
FOR RECOVERY
INSTRUCTIONS.
” will appear with a display of paper
misfeed locations. Press the INFORMATION (
) key
for more detailed information as necessary.
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
First confirm the misfeed locations.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional finisher, see page 7-26.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional finisher, see page 7-26.
COPIER TROUBLE?
Misfeed removal
MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
( P. 5-2)
( P. 5-3)
( P. 5-5)
( P. 5-6)
( P. 5-9)
A
B
C
Click on the first or last page to see other AR-C250 (serv.man6) service manuals if exist.