Sharp AR-C250 (serv.man6) User Manual / Operation Manual ▷ View online
2-3
CHAPTER
2
COPYING FROM THE DOCUMENT GLASS
1-sided copies of 1-sided originals
1
Open the document cover and place an original face
down on the document glass, using the centring scale
to position it.
down on the document glass, using the centring scale
to position it.
●
When copying multi-page documents, copy from the last page to
the first page.
the first page.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Do not place objects under the original size detector, because they
may damage it.
2
Close the document cover.
●
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically selected.
tray with the corresponding paper size will be automatically selected.
3
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
selected on the touch panel.
●
When no icon is displayed in the area indicated in the illustration
(
(
), the 1-sided to 1-sided copying mode is selected.
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
4
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
touch panel.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
is displayed.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
MAKING COPIES
Copying from the document glass
Use the document glass for copying single originals,
bound documents, and other originals that cannot be set
in the optional RADF.
bound documents, and other originals that cannot be set
in the optional RADF.
●
Only 1-sided to 1-sided and 1-sided to 2-sided
copying can be selected when copying from the
document glass.
copying can be selected when copying from the
document glass.
●
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2"R) paper is used.
sized paper (or 5-1/2" x 8-1/2"R) paper is used.
●
2-sided to 2-sided or 2-sided to 1-sided copying
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
●
Image loss (max. 5 mm (13/64")) can occur along
the leading edge of the copies. Image loss (max.
7mm (9/32")) can occur along the trailing edge of the
copies. Also image loss (max. 6 mm (1/4") in total)
can occur along the other edges of the copies.
the leading edge of the copies. Image loss (max.
7mm (9/32")) can occur along the trailing edge of the
copies. Also image loss (max. 6 mm (1/4") in total)
can occur along the other edges of the copies.
Original size detector
Centring scale
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
A4
A4
A3
B4
B4
AUTO
A4
ORIGINAL
1
2
3
4
5
6
7
8
9
0
P
C
CA
CLEAR
PROGRAM
AUDIT
INTERRUPT
CLEAR
ALL
N
2-4
CHAPTER
2
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
5
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
The number in the copy quantity display will decrease by 1 each
time a copy is made. To repeat the same copy sequence with a
different original, simply replace the original and press the
START key.
time a copy is made. To repeat the same copy sequence with a
different original, simply replace the original and press the
START key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the number in the copy quantity display will be reset
to 0.
to 0.
2-sided copies from 1-sided originals
To copy in the 1-sided to 2-sided copy mode, an optional duplex module
(AR-DU2) must be installed.
(AR-DU2) must be installed.
For an odd number of originals
:
1
Set the last page of the document onto the document
glass, and copy it in the 1-sided to 1-sided mode.
glass, and copy it in the 1-sided to 1-sided mode.
2
Press the 2-SIDED COPY key.
3
Press the
(EVEN NUMBER ORIGINALS) key on the
touch panel and then press the “OK” key.
OUTPUT
2-SIDED
COPY
AUTO
PRE-COUNT
MBER
ALS
OK
APER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.
2-SIDED COPY
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
AUTO
EXPOSURE
PAPER SELE
AUTO 8/ 11
Original size detector
Centring scale
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
2-5
CHAPTER
2
4
Copy the remainder of the originals in reverse order.
●
When making colour copies in the duplex mode onto extra size
paper or B4 (8-1/2" x 14") paper or larger, only one copy per
original can be made. Even if a multiple number of copies is set,
the number will be changed to 1 when a START (
paper or B4 (8-1/2" x 14") paper or larger, only one copy per
original can be made. Even if a multiple number of copies is set,
the number will be changed to 1 when a START (
,
)
key is pressed.
For an even number of originals:
1
Press the 2-SIDED COPY key.
2
Press the
(EVEN NUMBER ORIGINALS) key on the
touch panel and then press the “OK” key.
3
Copy the originals in reverse order.
●
When making colour copies in the duplex mode onto extra size
paper or B4 (8-1/2" x 14") paper or larger, only one copy per
original can be made. Even if a multiple number of copies is set,
the number will be changed to 1 when a START (
paper or B4 (8-1/2" x 14") paper or larger, only one copy per
original can be made. Even if a multiple number of copies is set,
the number will be changed to 1 when a START (
,
)
key is pressed.
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
OUTPUT
2-SIDED
COPY
AUTO
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
PRE-COUNT
MBER
ALS
OK
APER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.
2-SIDED COPY
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
AUTO
EXPOSURE
PAPER SELE
AUTO 8/ 11
2-6
CHAPTER
2
USING THE RADF
●
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2" paper) is used.
sized paper (or 5-1/2" x 8-1/2" paper) is used.
●
Image loss (max. 5 mm (13/64" )) can occur along the
leading edge of the copies. Image loss (max. 7mm (9/32"))
can occur along the trailing edge of the copies. Also
image loss (max. 6 mm (1/4") in total) can occur along
the other edges of the copies.
leading edge of the copies. Image loss (max. 7mm (9/32"))
can occur along the trailing edge of the copies. Also
image loss (max. 6 mm (1/4") in total) can occur along
the other edges of the copies.
●
The RADF can handle a maximum of 50 originals of
A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11") sizes and 30
originals of B4 to A3 (8-1/2" x 14" to 11" x 17") sizes.
A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11") sizes and 30
originals of B4 to A3 (8-1/2" x 14" to 11" x 17") sizes.
●
2-sided to 1-sided copying and 2-sided to 2-sided*
copying can be performed.
copying can be performed.
* For 2-sided to 2-sided copying, an optional duplex
module (AR-DU2) must be installed.
●
The originals must be set face up in the document
feeder tray.
feeder tray.
●
Different size originals with the same width can be
placed in the document feeder tray and automatically
copied onto copy paper of their respective sizes.
The automatic copy ratio selection will not function in
this case.
placed in the document feeder tray and automatically
copied onto copy paper of their respective sizes.
The automatic copy ratio selection will not function in
this case.
This copier can be equipped with an optional reversing
automatic document feeder (RADF).
The RADF will handle multiple originals.
automatic document feeder (RADF).
The RADF will handle multiple originals.
●
Before loading originals into the document feeder
tray, be sure to remove any staples or paper clips
from them.
tray, be sure to remove any staples or paper clips
from them.
●
Damaged or crumpled originals or originals which
have been folded may misfeed in the RADF or cause
incorrect size detection. It is recommended that these
be copied from the document glass and the copies be
used as original documents.
have been folded may misfeed in the RADF or cause
incorrect size detection. It is recommended that these
be copied from the document glass and the copies be
used as original documents.
●
When feeding originals which have closely spaced
binding holes punched along an edge, place the
originals so that the punched edge is positioned to the
right or along the side guides.
binding holes punched along an edge, place the
originals so that the punched edge is positioned to the
right or along the side guides.
●
Special originals such as transparency film and tracing
paper should not be fed from the RADF, but should be
placed on the document glass.
paper should not be fed from the RADF, but should be
placed on the document glass.
Stream feeding mode
If the stream feeding mode has been enabled using a key operator
program, the message “
If the stream feeding mode has been enabled using a key operator
program, the message “
NEWLY PLACED ORIGINALS WILL BE FED
AND COPIED AUTOMATICALLY.
” will appear and the original feed
indicator will continue to blink for approximately 5 seconds after
feeding of all originals is completed. While this message is displayed,
any new originals placed in the document feeder tray will be fed and
copied automatically.
feeding of all originals is completed. While this message is displayed,
any new originals placed in the document feeder tray will be fed and
copied automatically.
★ KEY OPERATOR
See page 8-24 for information on setting the
stream feeding mode.
MAKING COPIES
Using the RADF
Click on the first or last page to see other AR-C250 (serv.man6) service manuals if exist.