DOWNLOAD Sharp AR-C250 (serv.man6) Service Manual ↓ Size: 4 MB | Pages: 127 in PDF or view online for FREE

Model
AR-C250 (serv.man6)
Pages
127
Size
4 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / ARC250-Operation Manual
File
ar-c250-sm6.pdf
Date

Sharp AR-C250 (serv.man6) User Manual / Operation Manual ▷ View online

7
Contrast +
Brightness +
Intensity +
Contrast -
Brightness -
Intensity -
Original
5. Brightness/intensity/contrast (See page 3-22.)
This copier allows the level of brightness, intensity or contrast of images to be adjusted. If brightness is selected, colour
tone can be darkened or lightened. If intensity is selected, the level of colour saturation can be modified between  vivid
and dull. If contrast is selected, the contrast between two image areas can be adjusted higher or lower.
The thumbnails appearing on the screen
are a guideline to show the relative effect of
adjustments. The actual amount of change
will vary for different originals.
8
Colour Balance
The key operator program Colour Balance allows the key operator to adjust the density of
colours. Adjusted colour samples are shown below. (See page 8-22.)
Black adjustment -
Cyan adjustment -
Magenta adjustment -
Yellow adjustment -
Black adjustment+
Cyan adjustment +
Magenta adjustment +
Yellow adjustment +
Original
9
CHAPTER 4
SUPPLIES
PAPER
..........................
4-2
Types and sizes of copy paper
.........
4-2
Loading copy paper
.................
4-2
ADDING TONER
...................
4-5
USED TONER DISPOSAL
............
4-8
STORAGE OF SUPPLIES
............
4-9
CHAPTER 5
COPIER TROUBLE?
MISFEED REMOVAL
................
5-2
MAINTENANCE REQUIRED
.........
5-11
TONER COLLECTING CONTAINER OF
TRANSFER UNIT
.................
5-12
TROUBLESHOOTING
..............
5-13
CHAPTER 6
GENERAL INFORMATION
PART NAMES AND FUNCTIONS
.......
6-2
Exterior
..........................
6-2
Interior
..........................
6-3
Operation panel
....................
6-4
Touch panel (Basic screen)
...........
6-5
USER MAINTENANCE
..............
6-6
TOUCH PANEL CONTRAST
ADJUSTMENT
....................
6-7
SPECIFICATIONS
..................
6-8
CHAPTER 7
OPTIONAL EQUIPMENT
SYSTEM CONFIGURATION
..........
7-2
20-BIN STAPLE SORTER (AR-SS2)
.....
7-3
LARGE CAPACITY TRAY (AR-LC2)
....
7-15
FINISHER (AR-FN4)
...............
7-19
CHAPTER 8
KEY OPERATOR’S GUIDE
KEY OPERATOR CODE NUMBER
......
8-2
Registering the key operator
code number
......................
8-2
KEY OPERATOR PROGRAMS
........
8-4
Using the key operator programs
.......
8-7
KEY OPERATOR ASSISTANCE CALL
..
8-33
KEY OPERATOR CODE NUMBER:
FACTORY SETTING
...............
8-35
INTRODUCTION
....................
10
USING THIS MANUAL
................
10
CHAPTER 1
GETTING STARTED
INSTALLATION REQUIREMENTS
......
1-2
CAUTIONS
.......................
1-3
POWER ON AND OFF
...............
1-5
Power save modes
.................
1-6
INFORMATION FUNCTION
...........
1-7
USING THE TOUCH PANEL
..........
1-8
How to use the touch panel
...........
1-8
Selection of function
.................
1-8
Function setting icons
...............
1-9
CHAPTER 2
MAKING COPIES
AUDITING ACCOUNTS
..............
2-2
COPYING FROM THE DOCUMENT
GLASS
..........................
2-3
USING THE RADF
.................
2-6
REDUCTION/ENLARGEMENT/ZOOM
..
2-11
SPECIAL PAPERS (manual feed)
......
2-14
Two-sided copying with bypass tray
....
2-15
EXPOSURE ADJUSTMENTS
.........
2-16
JOB MEMORY
...................
2-18
INTERRUPTING A COPY RUN
.......
2-20
CHAPTER 3
SPECIAL FUNCTIONS
XY ZOOM
........................
3-2
MARGIN SHIFT
....................
3-4
ERASE
..........................
3-6
DUAL PAGE COPYING
..............
3-8
CENTRING
......................
3-10
TRANSPARENCY FILM WITH
INSERT SHEETS
.................
3-12
COVERS
.......................
3-14
COLOUR ADJUSTMENTS
...........
3-16
RGB adjust
......................
3-16
Sharpness
.......................
3-18
Suppress background
..............
3-20
Brightness/intensity/contrast
..........
3-22
IMAGE EDITING FUNCTIONS
........
3-24
Single colour
.....................
3-24
Neg./pos. reverse
.................
3-26
Mirror image
.....................
3-28
Photo repeat
.....................
3-30
A3 (11x17) full-bleed
...............
3-32
Multi-page enlargement
.............
3-34
Extra size
.......................
3-36
Page
Page
CONTENTS
CHAPTER
1
CHAPTER
2
CHAPTER
3
CHAPTER
4
CHAPTER
5
CHAPTER
6
CHAPTER
7
CHAPTER
8
10
2
1
2
1
[Inch series]
[AB series]
1. A4
2.
 
A3
3. B4
1.8/ 11 
2.11 17
3.8/ 14
Depending on the country or area, some keys of this copier will be indicated with
either an English name or a symbol. ––Example: INFORMATION (
) key,
PROGRAM (
P
) key.
INTRODUCTION
The AR-C250 copier is a digital colour  image processing copier which provides high productivity at a colour copy
speed of 25 copies/minute and convenient features including intelligent image-editing functions.
Amongst its many useful features and functions are the document feeder (optional), photo copying, internal auditor,
and various special functions such as dual page copying, margin shift, erase, XY zoom, and NEG./POS.  reverse
functions. This copier can be equipped with an optional large capacity tray which holds 3,000 sheets of copy paper.
The machine can also be equipped with an optional staple sorter or an optional finisher to provide finished copy sets
ready for distribution.
This copier was also designed with ease of use in mind. The easy-to-understand and coloured operation panel with
touch panel system and INFORMATION function will guide the user through most operations. To gain the maximum
benefit of all the features of the copier, however, it is recommended that users first read this manual to become familiar
with all the copier features.
NOTES:
This manual describes only copier features. For a description of optional printer features, see the separate relevant
manual.
This copier can be equipped with an optional document cover or reversing automatic document feeder (RADF).
The illustrations in this manual are mainly for the copier with an optional RADF installed.
The display on the touch panel varies with installation of optional equipment. The illustrations of the touch panel
in this manual are mainly for the copier with an optional RADF (AR-RF1) installed.
USING THIS  MANUAL
This manual is intended as an operation guide for both general users and key operators.
For General Users
It is recommended that you read the GETTING STARTED, MAKING COPIES, and SPECIAL FUNCTIONS sections
to become familiar with the available features and functions of your copier. Then refer to the manual as needed to
become thoroughly familiar with those features you will normally use.
For Key Operators
Please read all sections thoroughly to become familiar with all features and functions of your copier. Throughout the
manual, information which is relevant to key operator functions is noted by “
 
KEY OPERATOR.
” Please pay close
attention to these notes and to the SUPPLIES, COPIER TROUBLE?, GENERAL INFORMATION, and OPTIONAL
EQUIPMENT sections so you can ensure smooth and efficient operation of your machine.
The KEY OPERATOR’S GUIDE section has been written especially for you. It contains the programs and
programming information that will enable you to tailor functions for maximum benefit to your company.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
The inch series specifications are quoted in brackets.
For example:
Page 2-6 ------------------------------------------ B4 to A3 ( 8-1/2" x 14" to 11" x 17")
Page 2-12, step 3, Menu 1-A ---------------- 86%, 81%, and 70% (77% and 64%)
Although AB series size indications are shown on the touch panel of this manual, inch
series indications are displayed on the inch series machines.
In some regions, the spellings in this manual may be different from the touch panel
display. (colour, centring, etc.)
Page of 127
Display

Click on the first or last page to see other AR-C250 (serv.man6) service manuals if exist.