Sharp AR-C172M (serv.man4) Service Manual ▷ View online
AR-C172M UNPACKING AND INSTALLATION 5 - 6
[Color toner cartridge positions]
5) Insert the cartridge securely until it locks.
6) Return the cartridge lever to the original position.
7) Close the front cover.
9. AC cord connection
1) Insert the AC power plug into the connector at the rear of the
machine, and connect the other end to the power outlet.
10. Machine power ON
1) Turn on the power switch on the left side of the machine.
Black
Cyan
Magenta
Yellow
1
2
1
AR-C172M UNPACKING AND INSTALLATION 5 - 7
11. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destina-
tion setup, change the set values.
tion setup, change the set values.
On completion of the installation of the AR-F13 finisher, please
change the default output tray of the machine to the top tray of the
finisher.
change the default output tray of the machine to the top tray of the
finisher.
12. Image quality check
Check the following items related to image quality. For details of
the adjustment and checking procedures, refer to the chapter of
adjustments.
the adjustment and checking procedures, refer to the chapter of
adjustments.
1) Image focus, image skew (Refer to ADJ 3.)
2) Image registration (Refer to ADJ 4.)
3) Image loss, void area (Refer to ADJ 10.)
4) Copy color balance, density (Refer to ADJ 11.)
Check that the above items are normal. If not, make the adjust-
ment.
ment.
13. Function and operation check
Check that the following operations are normal.
14. Setup and adjustment data recording
Print the various setup data and the adjustment data (list) with
SIM22-6 and keep the data.
SIM22-6 and keep the data.
In case of a memory trouble, if the data are not kept, all the adjust-
ments must be made again.
ments must be made again.
If the data are kept, the setup values and the adjustment values
can be entered without adjustments, shortening the servicing time.
can be entered without adjustments, shortening the servicing time.
15. Necessary works before moving the
machine
1) If the following options are installed, remove all of them from
the machine.
• Finisher
• Reverse unit
• RSPF unit
• Desk unit
2) Remove the following consumable parts from the machine.
• Paper
• Toner cartridge
• Photoconductor cartridge
3) Lock the following sections.
• Scanner (Optical section)
• Paper cassette lift plate
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
Used to set the large capacity paper feed tray paper
size.
size.
Used to set the detection paper size and display
when using 8.5 x 13 size paper and document.
when using 8.5 x 13 size paper and document.
Used to set the paper kind and the display form in the
manual paper feed mode.
manual paper feed mode.
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and
the maintenance counter.
the maintenance counter.
18
Used to set YES/NO of the toner save mode (Only in
UK and Japan versions) For other destination
versions, this setup is made by the user program.
UK and Japan versions) For other destination
versions, this setup is made by the user program.
52
Used to set YES/NO of counting when non-print
paper is passed through each counter.
paper is passed through each counter.
53
Used to set YES/NO of user calibration permission.
65
Used to set the limit number of sheets for stapling.
Check item
Installation
Key input operation (Operation
panel)
panel)
Display (Operation panel)
Paper feed
operation
operation
Manual paper
feed
feed
Machine paper
tray
tray
Desk unit paper
feed tray
feed tray
When the desk unit is installed.
Paper size detection operation
Document size
detection
operation
detection
operation
Document table
mode
mode
RSPF mode
RSPF
operation/
Duplex copy
operation
operation/
Duplex copy
operation
S-S mode
D-S mode
S-D mode
When the desk unit with the
duplex unit is installed.
duplex unit is installed.
D-D mode
When the desk unit with the
duplex unit is installed.
duplex unit is installed.
Bookbinding operation
When the finisher is installed.
Stapling operation
When the finisher is installed.
Grouping operation
When the finisher is installed.
Sorting operation
When the finisher is installed.
AR-C172M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 1
[6] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Name and function of each section
A. External view
No.
Parts
Note
Name
Function
1
Left tray
Finished sheets are deposited here.
2
Left side cover
Open this cover when a paper misfeed occurs in the fusing unit or the transfer
unit.
unit.
3
Reversing single pass feeder
This automatically feeds originals to be scanned.
The feeder can turn the original over and scan the back side as well as the front
side for support of two-sided originals.
The feeder can turn the original over and scan the back side as well as the front
side for support of two-sided originals.
4
Power switch
Press to turn power on and off.
5
Front cover
Open to replace toner cartridge.
6
Operation panel
Performs various functions with the operation keys and the touch panel.
7
Centre tray
Finished sheets are deposited here.
8
Bypass tray
Special papers (including transparency film) and copy paper can be fed from the
bypass tray.
bypass tray.
9
Stand/1 x 500 sheet paper
drawer
drawer
This stand has one paper tray. It can hold approximately 500 sheets of the
recommended paper for color (80 g/m
recommended paper for color (80 g/m
2
or 21 lbs.), or approximately 550 sheets of
SHARP standard paper (64 g/m
2
or 21 lbs.).
Option
(AR-D17N)
(AR-D17N)
10
Stand/3 x 500 sheet paper
drawer
drawer
This stand has three paper trays. Each tray can hold approximately 500 sheets of
the recommended paper for color (80 g/m
the recommended paper for color (80 g/m
2
or 21 lbs.), or approximately 550
sheets of SHARP standard paper (64 g/m
2
or 21 lbs.).
Option
(AR-D18N)
(AR-D18N)
11
Duplex module/2 x 500 sheet
paper drawer
paper drawer
This stand includes a module for automatic two-sided printing and two paper
trays. The two trays can hold approximately 500 sheets of the recommended
paper for color (80 g/m
trays. The two trays can hold approximately 500 sheets of the recommended
paper for color (80 g/m
2
or 21 lbs.), or approximately 550 sheets of SHARP
standard paper (64 g/m
2
or 21 lbs.). To perform two-sided printing, a duplex
bypass/inverter unit (AR-RB1) is required.
Option
(AR-D19N)
(AR-D19N)
12
Paper tray
Each tray can hold approximately 500 sheets of the recommended paper for color
(80 g/m
(80 g/m
2
or 21 lbs.), or approximately 550 sheets of SHARP standard paper (64
g/m
2
or 21 lbs.).
13
Left side cover release
Push this release up to open the left side cover.
14
Duplex bypass/inverter unit
This module is required to automatically turn paper over within the machine for
automatic two-sided printing.
automatic two-sided printing.
Option
(AR-RB1)
(AR-RB1)
Without the duplex
bypass/inverter unit
(14) installed.
bypass/inverter unit
(14) installed.
1
2
3
4
14
13 12
11
5
6
7
8
9
10
AR-C172M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 2
B. Internal structure
No.
Parts
Note
Name
Function
15
Fusing unit
Toner images are fused here.
The fusing unit is hot. Take
care in removing misfed paper.
care in removing misfed paper.
16
Toner cartridge
The toner cartridge must be replaced when indicated on the
operation panel.
operation panel.
17
Right side cover
Open when a misfeed has occurred in the paper feed area.
18
Right cover of paper drawer
Open this cover to remove paper misfed in the paper drawer.
15
16
17
18
Click on the first or last page to see other AR-C172M (serv.man4) service manuals if exist.