DOWNLOAD Sharp AR-C150 (serv.man7) Service Manual ↓ Size: 4.05 MB | Pages: 127 in PDF or view online for FREE

This chapter describes operating instructions for the 20-Bin Staple Sorter
(AR-SS2) and Large Capacity Tray (AR-LC2).

                                      Page

●

●

●

●

●

7-2

●

●

●

●

●

7-3

●

●

●

●

●

Part names

7-3

●

●

●

●

●

Using the staple sorter

7-4

●

●

●

●

●

Sorter capacity

7-5

●

●

●

●

●

Staple sort

7-6

●

●

●

●

●

Manual stapling

7-8

●

●

●

●

●

  

Staple cartridge replacement

7-9

●

●

●

●

●

Staple jam removal

7-11

●

●

●

●

●

Misfeed removal

7-13

●

●

●

●

●

Specifications

7-14

●

●

●

●

●

7-15

●

●

●

●

●

Part names

7-15

●

●

●

●

●

Specifications

7-15

●

●

●

●

●

  

Loading copy paper

7-16

●

●

●

●

●

Misfeed removal

7-17

The options which are available for this copier are shown below.

System configuration

The front cover is to be
transferred from  the main unit.

Document cover (AR-VR2)

Reversing automatic
document feeder (AR-RF1)

Duplex module (AR-DU2)

20-bin staple sorter (AR-SS2)

NOTE:
The specifications of the 500-sheet
paper drawer (AR-CS2) are the same as
those of the paper trays in the copier.
See page 4-2.

Large capacity tray (AR-LC2)

500-sheet paper drawer (AR-CS2)

20-bin staple sorter (AR-SS2)

There are two sorter modes for different copying jobs: one sorts
copies into sets matching the sequence of the originals and the
second groups copies from different originals into separate sort bins.
The AR-SS2  20-Bin Staple Sorter has, in addition to the above two
modes, a STAPLE SORT mode. Sorted copies can be automatically
stapled together.
The maximum allowable number of copies varies with the selected
mode.
The number of copies will be automatically reset to the maximum
number allowable for the selected mode when copying begins if this
maximum is exceeded.

★ KEY OPERATOR

Staple required indicator

Manual staple key

Stapler cover

Sort bins

  CAUTION

●

Do not put pressure on the sorter or subject it to undue force.

●

Do not place your  hands on the sorter during copying because the sorter moves up and down.

When none of the three sorter modes, SORT, STAPLE SORT or
GROUP is selected, the copier is in the NON-SORT mode. In this
mode, all copies will be deposited in the top bin of the sorter.
Be sure to use the NON-SORT mode when copying onto special
papers such as transparency film or label stock.

SORT is used for automatic copy collating. Copies of each original
will be sequentially deposited in the sort bins.

In this mode, copies will be automatically sorted and finished sets of
copies can be stapled with the manual staple key.
When used in conjunction with an optional RADF, sorted copies will
be automatically stapled.

In the GROUP mode, all copies of the same original will be
deposited in the same bin.

To cancel the mode, press the OUTPUT key and select “NON
SORT” on the touch panel.

GROUP

SORT

20-bin staple sorter (AR-SS2)

OUTPUT

NON SORT

SORT

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO

READY TO COPY. 

OUTPUT

NON SORT

SORT

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO

READY TO COPY. 

OUTPUT

NON SORT

SORT

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO

READY TO COPY. 

OUTPUT

NON SORT

SORT

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO

READY TO COPY.