DOWNLOAD Sharp AR-C150 (serv.man7) Service Manual ↓ Size: 4.05 MB | Pages: 127 in PDF or view online for FREE

The contrast of the touch panel can be adjusted as below.

Touch panel contrast adjustment

1

4

7

AUDIT

CUSTOM

SETTINGS

KEY OPERATOR

PROGRAMS

ETTINGS

EXI

DISPLAY

CONTRAST

TTINGS

ONTRAST

LIGHTER

DARKER

ER

DARKER

Specifications

Type

Console

Copy system

Dry, electrostatic transfer system

Originals

Sheets, bound documents

Original sizes

Max. A3 (11" x 17")

Copy paper sizes

Max. A3 wide (12" x 18"), min. A6 (5-1/2" x 8-1/2")
Image loss:

Max. 5 mm (13/64") (leading edge)
Max. 7 mm (9/32") (trailing edge)
Max. 6 mm (1/4") (along all other edges in total)

Copying speed

Colour:

Black/White:

15 copies/min.

25 copies/min.

(A4 (8-1/2" x 11"))

(A4 (8-1/2" x 11"))

11 copies/min.

19 copies/min.

(A4R (8-1/2" x 11"R))

(A4R (8-1/2" x 11"R))

9 copies/min.

15 copies/min.

(B4 (8-1/2" x 14"))

(B4 (8-1/2" x 14"))

7 copies/min.

13 copies/min.

(A3 (11" x 17"))

(A3 (11" x 17"))

Continuous copy

Max. 999 copies; subtractive counter

First-copy time*

Colour : Approx. 10.5 sec. ,  Black/White : Approx. 19.5 sec.
* From the first tray. In the default setting.

Warm-up time

Approx. 200 sec. (Approx. 260 sec. for 200V to 240V power
supply voltage)

Copy ratio

Variable: 25 to 400% in 1% increments, total 376 steps
(can be set in the horizontal and vertical directions
independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%,
129%, 141%, 200%, 400%)

Exposure system

Moving optical source (stationary platen) with automatic exposure
function

Copy paper feed

Three paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability

Fusing system

Heat rollers

Developer system

Magnetic brush development

Light source

Halogen lamp

Resolution

Scan:

600 dpi

Output: 600 dpi

Gradation

Scan:

256 levels

Output: 256 levels

Required power supply

Local voltage ± 10% (For this copier’s power requirements, see the
name plate located on the right hand side at the rear corner of copier.)

Power consumption

Max. 1.5 kW / 1.8 kW

Overall dimensions

1412 mm (W) x 695 mm (D)
(55-19/32" (W) x 27-3/8" (D))

Weight

Approx. 152 k

g 

(335 lbs.)

Specifications

Copier dimensions

750 mm (W) x 695 mm (D) x 1060 mm (H)

(with optional document

(29-17/32" (W) x 27-3/8" (D) x 41-47/64" (H))

cover)

Operating conditions*

Temperature: 15°C to 35°C (59°F to 95°F)
Humidity:

20% to 80%

* If the temperature is higher than 30°C (86°F), the humidity should

be lower than 60%.

Optional equipment

Document cover (AR-VR2)
Reversing automatic document feeder (AR-RF1)
20-bin staple sorter (AR-SS2)
Large capacity tray (AR-LC2)
500-sheet paper drawer (AR-CS2)
Duplex module (AR-DU2)

Acceptable originals

Single-sided originals: 50 to 128

g

/m

2 

(14 to 34 lbs.)

Weight:

Two-sided originals: 50 to 128

g

/m

2 

(14 to 34 lbs.) for A5 and A4 (5-1/2"

x 8-1/2" and 8-1/2" x 11") originals.
50 to 110

g

/m

2 

(14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")

originals.

Size:

A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Capacity:

Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11")

originals provided the total aggregate thickness does not exceed
6.5mm or 1/4" (50 to 80

g

/m

2

 (14 to 21 lbs.)) or 5 mm or 3/16" (80 to

128

g

/m

2 

(21 to 34 lbs.))

Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals

Paper type

Ordinary paper only

Number of copies

1 (trayless system)

Copy paper size

A5, A4, A4R, B4, A3 (7-1/4" x 10-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", 11" x 17")
In some regions, 216mm x 330mm (8-1/2" x 13") size paper can be
used in place of B4 (8-1/2" x 14") .

Copy paper weight

60 to 105 

g

/m

2

 (15 lbs. to 28 lbs.)

Specifications are subject to change for improvement without notice.