Sharp AR-C150 (serv.man7) User Manual / Operation Manual ▷ View online
5-1
CHAPTER
5
CHAPTER 5
COPIER TROUBLE?
This chapter describes how to remove misfed originals and paper and
other common trouble remedies.
other common trouble remedies.
Page
●
●
●
●
●
MISFEED REMOVAL
...............................
5-2
●
●
●
●
●
MAINTENANCE REQUIRED
........................
5-11
●
●
●
●
●
TONER COLLECTING CONTAINER OF TRANSFER UNIT
..
5-12
●
●
●
●
●
TROUBLESHOOTING
.............................
5-13
5-2
CHAPTER
5
( P. 5-2)
( P. 5-3)
( P. 5-5)
( P. 5-6)
( P. 5-9)
Misfeed in the optional RADF
When the optional RADF misfeeds an original sheet, the copier will
stop and the misfeed message will appear.
stop and the misfeed message will appear.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
A
B
C
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message “
The message “
A MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
FOR RECOVERY
INSTRUCTIONS.
” will appear with a display of paper
misfeed locations. Press the INFORMATION (
) key
for more detailed information as necessary.
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
First confirm the misfeed locations.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
COPIER TROUBLE?
Misfeed removal
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
5-3
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
(A) Open the feeding roller cover and pull the original gently
to the right and out from the document feeder tray.
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
the misfeed display.
(B) Open the exit roller cover and gently pull the original
out.
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
the misfeed display.
(C) Open the feeding roller cover and the document feeder
cover, and remove the original.
NOTE:
After misfed originals are removed from locations A, B and/or C, a
message may appear indicating the number of originals which must
be returned to the document feeder tray. Return the originals and
press the START (
After misfed originals are removed from locations A, B and/or C, a
message may appear indicating the number of originals which must
be returned to the document feeder tray. Return the originals and
press the START (
,
) key to resume copying.
Misfeed in the bypass tray
1
Open the front cover.
Feeding roller cover
Exit roller cover
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
5-4
CHAPTER
5
COPIER TROUBLE?
Misfeed removal
MISFEED REMOVAL
2
Turn the transport lever to the left.
●
Do not pull out the paper transport in this step.
3
Turn roller rotating knob
A
in the direction of the arrow
to feed the misfed paper into the copier.
●
Do not pull the misfed paper out through the bypass tray because
unfixed toner may soil the inside of the copier.
unfixed toner may soil the inside of the copier.
4
Pull out the paper transport.
5
Remove the misfed paper.
6
Push the paper transport back securely into the copier
and turn the transport lever back.
and turn the transport lever back.
Roller rotating knob A
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.