Sharp AR-C150 (serv.man7) User Manual / Operation Manual ▷ View online
4-3
CHAPTER
4
SUPPLIES
Paper
Loading paper in the paper trays
1
Gently lift and pull out the paper tray.
2
Only use paper within the Sharp specification and
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
●
The tray holds 500 sheets of paper.
Do not load paper above the maximum height line.
Do not load paper above the maximum height line.
3
Push the paper tray firmly back into the copier.
PAPER
Maximum height line
4-4
CHAPTER
4
PAPER
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Adjust the paper size indicator to match the paper size
to be set.
to be set.
●
Slide the paper size indicator to the right or left to match the paper
size.
size.
3
Adjust the front guide and left guide while squeezing
their lock levers.
their lock levers.
●
Slide the front and left guides to match the width and length of the
copy paper.
copy paper.
4
Load copy paper into the tray.
5
Place the paper size card in the front of the paper tray.
●
The paper size card has three faces. Fold the card properly to
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match the
selected paper size.
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match the
selected paper size.
6
Push the paper tray firmly back into the copier.
SUPPLIES
Paper
Paper size indicator
Left guide
Front guide
Maximum height line
Paper size card
8
x11
216x279
216x330
8
x13
B5
A4
A3
A5
B5
B4
4-5
CHAPTER
4
The message “
TONER SUPPLY IS LOW.
” will appear in
the message display before the toner supply is completely empty.
(
(
indicate toner types.
Y
: yellow,
M
: magenta,
C
: cyan,
BK
:
black) If copying is continued, copies will gradually become lighter until
the copier stops and the message display changes to “
the copier stops and the message display changes to “
ADD
TONER. PRESS
.
” indicating that the toner supply is empty. Toner
can be added any time after the message “
TONER SUPPLY IS
LOW.
” appears. To add toner, stop the copier and proceed as
below. When either message appears, you can use the INFORMATION
(
(
) key for detailed information as necessary.
If any colour toner supply is empty, colour copying cannot be performed.
Black/white copying, however, can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “
Black/white copying, however, can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “
TONER REPLENISHMENT IN PROGRESS.
”
may appear and the copier may stop making copies even though
toner is left.
The copier will automatically cycle and replenish the toner to the
toner is left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START (
) key indicator will light up. Press
the START (
,
) key to resume copying.
SUPPLIES
Adding toner
ADDING TONER
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
1
Open the front cover.
2
Push the lock release buttons on both sides of the toner
box and pull the toner box out slowly until it stops.
box and pull the toner box out slowly until it stops.
●
The toner hoppers are located as below.
GENUINE SUPPLIES
Yellow
Cyan
Magenta
Black
4-6
CHAPTER
4
3
Tap on the top of the new toner cartridge 5 times. Then
hold the toner cartridge horizontally and vigorously
shake it sufficiently about 20 times. This will loosen the
toner and allow it to flow more easily into the toner
hopper.
hold the toner cartridge horizontally and vigorously
shake it sufficiently about 20 times. This will loosen the
toner and allow it to flow more easily into the toner
hopper.
CAUTION
Be sure to perform these steps. If not, toner may not flow easily into
the toner hopper.
the toner hopper.
4
Place the new toner cartridge with the protrusions into
the notches of the relevant toner hopper as shown.
the notches of the relevant toner hopper as shown.
●
The left example shows the toner hopper of black toner.
5
Slide the toner cartridge along the guides over the toner
hopper.
hopper.
6
Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
the sealing tape to remove it.
●
It will take about 40 seconds for the cartridge to empty.
ADDING TONER
SUPPLIES
Adding toner
Sealing tape
5 x
20 x
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.