Sharp AR-507 (serv.man7) User Manual / Operation Manual ▷ View online
2-15
CHAPTER
2
5
Press the “PAPER SELECT” key on the touch panel and
then select the bypass tray.
then select the bypass tray.
●
If paper type selection has been enabled, select “60 ~ 105
g
/m
2
”
(“16 ~ 28 lbs.”) or “106 ~ 200
g
/m
2
” (“28+ ~ 55 lbs.”).
●
If “60 ~ 105
g
/m
2
” (“16 ~ 28 lbs.”) is specified and heavier paper
is used, a misfeed may occur.
6
Set the number of copies.
7
Press the START (
) key.
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of specification for duplex module
is used.
when the heavy paper which is out of specification for duplex module
is used.
1
Place the first original face down on the document glass
and make a copy.
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
stations.
2
Replace the first original with the second original and
close the document cover.
close the document cover.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
way on the document glass.
●
The first and second originals can be set in the document feeder
tray. They must, however, be set and fed individually.
tray. They must, however, be set and fed individually.
3
Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Press the “PAPER SELECT” key and select the bypass
tray.
tray.
●
If paper type selection has been enabled, select “60 ~ 105
g
/m
2
”
(“16 ~ 28 lbs.”) or “106 ~ 200
g
/m
2
” (“28+ ~ 55 lbs.”).
5
Press the START (
) key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
1 2
COPY.
O
URE
PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2
1.
2.
A4
A3
A4R
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
1.
2.
A4
A3
A4R
PAPER TYPE
60~105
g
/m
2
106~200
g
/m
2
2-16
CHAPTER
2
Automatic
This is the standard initial setting for this copier. In this mode, the
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images by reducing the effect
of coloured or shaded background areas.
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images by reducing the effect
of coloured or shaded background areas.
Text, text/photo, and photo
Text mode:
This mode is useful in enhancing very low density
areas of an original or in suppressing unusually
high-density background areas.
areas of an original or in suppressing unusually
high-density background areas.
Text/photo mode: This mode provides the best balance for copying
an original which contains both text and photos.
This mode is also useful for copying printed
photographs.
This mode is also useful for copying printed
photographs.
Photo mode:
This mode provides the best copies of photographs
with fine details.
with fine details.
1
Press the “EXPOSURE” key on the touch panel.
2
Select “TEXT”, “TEXT/PHOTO” or “PHOTO” depending
on the original.
on the original.
3
Use the
and
keys to adjust the copy density
as desired.
EXPOSURE ADJUSTMENTS
This copier has four exposure modes to choose from: AUTOMATIC,
TEXT, TEXT/PHOTO and PHOTO.
TEXT, TEXT/PHOTO and PHOTO.
MAKING COPIES
Exposure adjustments
AUTO
EXPOSURE
AUTO
EXPOSURE
PAPER
AUTO
AUTO
TEXT
TEXT/PHOTO
PHOTO
EXPOSURE
PAPER SE
AUTO A
1. A4
2. A3
EXPOSURE
TEXT/PHOTO
PAPE
AU
1.
2.
2-17
CHAPTER
2
MAKING COPIES
Sort/group
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2
SORT/GROUP
When the SORT (
) icon is indicated on the touch panel, copies
will be collated by sets and then delivered to the exit tray.
When the GROUP (
When the GROUP (
) icon is indicated, copies will be grouped by
originals.
●
When the RSPF is used for copying, copies will be collated in the
default setting. To copy in the GROUP mode, press the OUTPUT
key and then select the GROUP mode on the touch panel. When
the GROUP mode is selected, the GROUP (
default setting. To copy in the GROUP mode, press the OUTPUT
key and then select the GROUP mode on the touch panel. When
the GROUP mode is selected, the GROUP (
) icon is indicated
on the touch panel.
●
When the document glass is used for copying, the copier is not in
the SORT nor GROUP mode. Copies will be delivered face up
each time the START (
the SORT nor GROUP mode. Copies will be delivered face up
each time the START (
) key is pressed. To copy in the SORT or
GROUP mode, press the OUTPUT key and then select the SORT
mode or GROUP mode on the touch panel. Copies will be
delivered face down.
mode or GROUP mode on the touch panel. Copies will be
delivered face down.
SORT mode
Each set of copies will be sequentially delivered to the exit
tray.
tray.
GROUP mode
All copies of the same original will be grouped in the exit
tray.
tray.
2-18
CHAPTER
2
JOB MEMORY
Frequently used job programs can be stored in each of nine storage
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
●
All functions that can be set in the copy mode except the copy
quantity setting can be stored in the job memory.
quantity setting can be stored in the job memory.
●
If any function which has been stored in a job program is modified
by a key operator program, the key operator settings will supercede
the previous setting.
by a key operator program, the key operator settings will supercede
the previous setting.
★ KEY OPERATOR
Job memory replacement/deletion can be
prohibited. See page 8-27.
Storing a job program
1
Press the PROGRAM (
P
) key.
●
The JOB PROGRAMS screen will appear on the touch panel.
2
Press the “STORE/DELETE” key on the touch panel.
●
To cancel the job memory mode, press the “EXIT” key or the
CLEAR ALL (
CLEAR ALL (
CA
) key.
3
Select a program number from 1 to 9 on the touch panel.
●
The numbers which are highlighted are program numbers which
have been used.
have been used.
●
If a program number which has been used is entered, a message
will appear to confirm the selection. To replace with the new
program, press the “STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
will appear to confirm the selection. To replace with the new
program, press the “STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
4
Make all copier selections to be stored.
5
Press the “OK” key to complete the storage.
MAKING COPIES
Job memory
8
9
0
C
CLEAR
PROGRAM
LEAR
P
STORE/DELETE
RECALL
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
MAKE COPIER SELECTIONS AND PRESS
[OK].
OK
CANCEL
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1.
2.
A4
A3
106~200
g
/m
2
Click on the first or last page to see other AR-507 (serv.man7) service manuals if exist.