Sharp AR-507 (serv.man7) User Manual / Operation Manual ▷ View online
2-11
CHAPTER
2
MAKING COPIES
Reduction/Enlargement/Zoom
Automatic selection
1
Place the original in the document feeder tray or on the
document glass.
document glass.
●
The original size will be detected and indicated on the touch
panel.
panel.
2
Press the “PAPER SELECT” key on the touch panel and
select the paper tray with the desired paper size.
select the paper tray with the desired paper size.
3
Press the “AUTO IMAGE” key on the touch panel.
●
The best reduction or enlargement ratio for the selected paper
size will be automatically set and displayed on the touch panel.
size will be automatically set and displayed on the touch panel.
●
If the originals and the selected copy paper are not facing the
same direction, the image will be automatically rotated to match
the copy paper. If enlargement copying onto a paper size larger
than A4 (8-1/2" x 11") is performed and in case of 100% copying
onto a paper size larger than B4 (8-1/2" x 14"), however, the
image will not be rotated.
same direction, the image will be automatically rotated to match
the copy paper. If enlargement copying onto a paper size larger
than A4 (8-1/2" x 11") is performed and in case of 100% copying
onto a paper size larger than B4 (8-1/2" x 14"), however, the
image will not be rotated.
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
This feature will not work when original or copy paper is of non-
standard size.
4
Enter the desired number of copies.
5
Press the START (
) key.
●
To cancel the automatic reduction/enlargement mode, press the
“AUTO IMAGE” key again.
“AUTO IMAGE” key again.
REDUCTION/ENLARGEMENT/ZOOM
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2
1.
2.
A4
A3
AUTO IMAGE
PER SELECT
100%
COPY RATIO
.
.
A4
A3
A3
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
Reduction and enlargement ratios can be selected either
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% in 1% increments.
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% in 1% increments.
★ KEY OPERATOR
A total of four extra preset copy ratios, two each
for reduction and enlargement, can be added. See page 8-17.
2-12
CHAPTER
2
Manual selection
1
Place the original in the document feeder tray or on the
document glass.
document glass.
2
Press the “COPY RATIO” key on the touch panel.
3
Use the
MENU
1
2
key to select menu 1 or menu 2 for copy
ratio selection.
Menu 1
A. Preset reduction copy ratios are: 86%, 81%, and 70%
(77% and 64%).
B. Preset enlargement copy ratios are: 115%, 122%, and
141% (121% and 129%).
Menu 2
A. Preset reduction copy ratios are: 50% and 25% (95%,
50%, and 25%).
B. Preset enlargement copy ratios are: 200% and 400%
(141%, 200%, and 400%).
4
Use the reduction, enlargement, and “ZOOM” keys on
the touch panel to set the desired copy ratio.
the touch panel to set the desired copy ratio.
Zoom ratios: Any ratio from 25% to 400% can be set in
1% increments.
1% increments.
●
Press a reduction or enlargement key to set the approximate
ratio, then press the
ratio, then press the
key to decrease the ratio or the
key
to increase the ratio.
●
To set the horizontal and vertical copy ratios separately, use the
XY ZOOM feature. See page 3-2.
XY ZOOM feature. See page 3-2.
●
To reset the copy ratio to 100%, press the “100%” key on the
touch panel.
touch panel.
●
The message “
IMAGE IS LARGER THAN THE COPY PAPER.
”
may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START (
)
key, a copy will be made.
●
The image of the original may be rotated to match the copy paper
orientation if the original and copy paper are of standard sizes.
orientation if the original and copy paper are of standard sizes.
MAKING COPIES
Reduction/Enlargement/Zoom
REDUCTION/ENLARGEMENT/ZOOM
READY TO COPY.
AUTO
XY ZOOM
100%
ZOOM
%
100
MENU
1
2
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
AUTO A4
86%
A4 B5
A3 B4
A3 B4
81%
B5 A5
B4 A4
B4 A4
70%
A4 A5
A3 A4
A3 A4
115%
B5 A4
B4 A3
B4 A3
122%
A5 B5
A4 B4
A4 B4
141%
A5 A4
A4 A3
A4 A3
OK
READY TO COPY.
AUTO
XY ZOOM
100%
ZOOM
%
100
MENU 1
2
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
AUTO A4
50%
25%
200%
400%
OK
PAPER SELECT
100%
COPY RATIO
1.
2.
A4
A3
AUTO A4
106~200
g
/m
2
MENU 1
MENU 2
2-13
CHAPTER
2
5
Press the “OK” key.
6
Use the “PAPER SELECT” key to select the paper tray
with the desired paper size.
with the desired paper size.
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratio.
paper size will have been automatically selected based on the
original size and selected copy ratio.
●
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key to select the bypass tray.
and press the “PAPER SELECT” key to select the bypass tray.
7
Enter the desired number of copies.
8
Press the START (
) key.
REDUCTION/ENLARGEMENT/ZOOM
MAKING COPIES
Reduction/Enlargement/Zoom
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
141%
COPY RATIO
1.
2.
A4
A3
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
READY TO COPY.
AUTO
XY ZOOM
100%
ZOOM
%
141
MENU
1
2
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
AUTO A3
86%
A4 B5
A3 B4
A3 B4
81%
B5 A5
B4 A4
B4 A4
70%
A4 A5
A3 A4
A3 A4
115%
B5 A4
B4 A3
B4 A3
122%
A5 B5
A4 B4
A4 B4
141%
A5 A4
A4 A3
A4 A3
OK
2-14
CHAPTER
2
1
Place the original in the document feeder tray or on the
document glass.
document glass.
2
Open the bypass tray.
3
Set the bypass tray guides to the width of the copy
paper.
paper.
●
Be sure to extend the tray when feeding A4R, B4 or A3 (8-1/2"
x 11"R, 8-1/2" x 14" or 11" x 17") sized paper.
When feeding A3 (11" x 17") sized paper, pull out the metallic
support.
x 11"R, 8-1/2" x 14" or 11" x 17") sized paper.
When feeding A3 (11" x 17") sized paper, pull out the metallic
support.
4
Insert the copy paper all the way into the bypass tray.
●
Labels, tracing paper, and other special purpose papers other
than SHARP recommended transparency film must be fed
individually. Multiple sheets of SHARP recommended
transparency film can be loaded in the bypass tray.
than SHARP recommended transparency film must be fed
individually. Multiple sheets of SHARP recommended
transparency film can be loaded in the bypass tray.
●
Up to 50 sheets of standard copy paper measuring from
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") can be loaded into the
bypass tray.
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") can be loaded into the
bypass tray.
●
For automatic two-sided copying of A5 paper, position the side
guides against the copy paper’s longest side.
guides against the copy paper’s longest side.
●
A6 size paper must be fed narrow side into the feed slot and must
be fed individually.
be fed individually.
●
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
with the paper to be added and then reload as a single stack.
MAKING COPIES
Special papers (manual feed)
SPECIAL PAPERS (manual feed)
The bypass tray is used to copy onto transparency
film, labels, tracing paper, and other special purpose
papers. Up to 50 sheets of standard copy paper can be
set in the bypass tray.
film, labels, tracing paper, and other special purpose
papers. Up to 50 sheets of standard copy paper can be
set in the bypass tray.
●
Automatic duplex copying will not work when a non-
standard sized paper is used. If a duplex copying
mode is selected and a non-standard sized paper is
used from the bypass tray, the corresponding one-
sided mode will be selected automatically when the
START (
standard sized paper is used. If a duplex copying
mode is selected and a non-standard sized paper is
used from the bypass tray, the corresponding one-
sided mode will be selected automatically when the
START (
) key is pressed.
NOTE:
In this copier, copies are normally delivered face down.
When copying onto special paper (including
transparency film) placed in the bypass tray, however,
copies will be delivered face up. When copying multi-
page documents from the document glass onto special
paper, copy from the last page to the first page. Also,
In this copier, copies are normally delivered face down.
When copying onto special paper (including
transparency film) placed in the bypass tray, however,
copies will be delivered face up. When copying multi-
page documents from the document glass onto special
paper, copy from the last page to the first page. Also,
if an optional finisher (AR-FN3) is installed and the top
tray output is selected, copy from the last page to the
first page and then press the “READ-END” key on the
touch panel. Copying will start after the “READ-END”
key is pressed. In the default setting, paper placed in
the bypass tray is always regarded as special paper
and auto paper selection for the bypass tray is
disabled.
tray output is selected, copy from the last page to the
first page and then press the “READ-END” key on the
touch panel. Copying will start after the “READ-END”
key is pressed. In the default setting, paper placed in
the bypass tray is always regarded as special paper
and auto paper selection for the bypass tray is
disabled.
★ KEY OPERATOR
If the selection of paper type
placed in the bypass tray is enabled, the type of copy
paper can be specified on the touch panel after the
“PAPER SELECT” key is pressed. Plain paper placed
in the bypass tray can be regarded as plain paper and
copies can be delivered face down. See page 8-22.
And if auto paper selection from the bypass tray is
enabled, paper placed in the bypass tray will be one of
the alternatives of auto paper selection adding to other
paper trays. See page 8-28. This function is available
only when the selection of paper type placed in the
bypass tray is enabled.
paper can be specified on the touch panel after the
“PAPER SELECT” key is pressed. Plain paper placed
in the bypass tray can be regarded as plain paper and
copies can be delivered face down. See page 8-22.
And if auto paper selection from the bypass tray is
enabled, paper placed in the bypass tray will be one of
the alternatives of auto paper selection adding to other
paper trays. See page 8-28. This function is available
only when the selection of paper type placed in the
bypass tray is enabled.
Click on the first or last page to see other AR-507 (serv.man7) service manuals if exist.