DOWNLOAD Sharp AR-507 (serv.man7) Service Manual ↓ Size: 4.04 MB | Pages: 127 in PDF or view online for FREE

Model
AR-507 (serv.man7)
Pages
127
Size
4.04 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR507-Operation Manual
File
ar-507-sm7.pdf
Date
PREV: Sharp AR-507 (serv.man6) Service Manual / Parts Guide

Sharp AR-507 (serv.man7) User Manual / Operation Manual ▷ View online

7-11
CHAPTER
7
8
Remove the rear paper and tape from the cartridge.
●
Pull the tape straight. If not, the tape may tear.
9
Insert the staple box into the stapler unit until it clicks
into place.
10
Lower the lock lever and return the stapler unit to face
down. Push the stapler unit until it locks.
11
Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
FINISHER (AR-FN3)
7-12
CHAPTER
7
Staple jam removal
If staples become jammed in the stapler, “
CHECK STAPLER POSITION
OR STAPLE JAM.
” will be displayed.  Remove the jammed staples in the
manner described below.
1
While holding the finisher release lever, slide the finisher
away from the copier.
2
Lower the lock lever to unlock the stapler unit.
3
Turn the stapler unit to face up.
4
Hold the staple box release lever to unlatch the staple
box.
5
Remove the staple box.
6
Lower the lever at the end of the staple box and remove
the jammed staples.
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
FINISHER (AR-FN3)
7-13
CHAPTER
7
7
Return the lever to its original position.
8
Insert the staple box into the stapler unit until it clicks in
place.
9
Lower the lock lever and return the stapler unit to face
down. Push the stapler unit until it locks.
10
Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
FINISHER (AR-FN3)
7-14
CHAPTER
7
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
FINISHER (AR-FN3)
Misfeed removal
The copier will stop when a misfeed occurs.
The message “
A MISFEED HAS OCCURRED. CLEAR INDICATED AREA.
PRESS 
 FOR RECOVERY INSTRUCTIONS.
” will appear with a display
of paper misfeed locations.  Press the INFORMATION (
) key for more
detailed information as necessary.
SF-S15  20-bin sorter
Misfeed in the upper transport area
1
While holding the finisher release lever, slide the finisher
away from the copier.
2
Remove the misfed paper.
●
If the misfed paper is visible at the copier exit area, remove it and
then open and close the front cover to cancel the misfeed
display.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS   FOR RECOVERY INSTRUCTIONS.
Page of 127
Display

Sharp AR-507 (serv.man7) User Manual / Operation Manual ▷ Download

Found More:

AR-507 (serv.man7) Service Manuals

Preview DownloadPagesSize
AR-507 (serv.man3) AR287 337 407 507-Circuit Diagrams Service Manual 127 3.78 MB
AR-507 (serv.man4) AR287 337 407 507-Service Manual Service Manual 26 469.71 KB
AR-507 (serv.man5) Parts Guide AR250 280 285 287 335 337 405 407 505 507 Service Manual / Parts Guide 127 5.15 MB
AR-507 (serv.man6) AR287 337 407 507-Parts Guide Service Manual / Parts Guide 17 366.57 KB
AR-507 (serv.man2) AR287 337 407 507-Specification Service Manual / Specification 6 91.53 KB
AR-507 (serv.man68) ROM management no. 3 . (YELLOW) Service Manual / Technical Bulletin 3 145.04 KB
AR-507 (serv.man49) Firmware required for hard disc drive upgrade Service Manual / Technical Bulletin 1 22.02 KB
AR-507 (serv.man67) Changes to the AR505 Service Manual and addition of jam cause codes. (WHITE) Service Manual / Technical Bulletin 5 323.5 KB
AR-507 (serv.man66) Change of supplier for sintered bearings. (WHITE) Service Manual / Technical Bulletin 4 188.72 KB
AR-507 (serv.man65) Part change information. Service Manual / Technical Bulletin 2 159.99 KB
AR-507 (serv.man64) Service guide to overcome exit unit paper jams. Service Manual / Technical Bulletin 3 104.08 KB
AR-507 (serv.man63) Abnormal noise from process unit. Service Manual / Technical Bulletin 1 60.54 KB
AR-507 (serv.man62) ROM software changes. Service Manual / Technical Bulletin 1 67.75 KB
AR-507 (serv.man61) Action to alleviate problems of static electricity through the use of a plastic bag for the machine. Service Manual / Technical Bulletin 1 72.92 KB
AR-507 (serv.man60) Addition of explanatory label for lever operation and change of suction lift shaft. Service Manual / Technical Bulletin 1 120.69 KB
AR-507 (serv.man59) Problem with main drive unit paper feed clutch. Service Manual / Technical Bulletin 3 1.18 MB
AR-507 (serv.man58) Change of parts used in 550 paper feeding unit. Service Manual / Technical Bulletin 2 123.63 KB
AR-507 (serv.man57) Change carried ut in the hopper seal of the developing tank. Service Manual / Technical Bulletin 6 213.84 KB
AR-507 (serv.man56) Change to the metal plating of the ADU connecting shaft and addition of a distinguishing groove. Service Manual / Technical Bulletin 1 128.52 KB
AR-507 (serv.man55) Change to pulley fixing double-thread screw and discontinued M4 tap. Service Manual / Technical Bulletin 1 86.06 KB
AR-507 (serv.man54) Skew margin up of RSPF reverse unit. Service Manual / Technical Bulletin 2 106.44 KB
AR-507 (serv.man53) Added upper cover cushion for RSPF unit. Service Manual / Technical Bulletin 1 108.7 KB
AR-507 (serv.man52) EPROM upgrade for RSPF. Service Manual / Technical Bulletin 1 74.12 KB
AR-507 (serv.man51) Problem code L4-03 (fusing motor lock detection) notification. Service Manual / Technical Bulletin 1 65.54 KB
AR-507 (serv.man50) Polygon motors for laser units. Service Manual / Technical Bulletin 1 20.69 KB
AR-507 (serv.man48) Parts change information (PCU flash PWB, PBA control PWB, ROM assembly, paper feeding unit) Service Manual / Technical Bulletin 1 31.62 KB
AR-507 (serv.man79) Correction of CG50 curvature in the turnover paper guide. (YELLOW) Service Manual / Technical Bulletin 2 98.19 KB
AR-507 (serv.man88) Report of flash memory version method. (WHITE) Service Manual / Technical Bulletin 2 126.14 KB
AR-507 (serv.man87) Report of flash memory version method. (WHITE) Service Manual / Technical Bulletin 3 129.94 KB
AR-507 (serv.man86) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 139.58 KB
AR-507 (serv.man85) Change in shape of the TC holder R. (WHITE) Service Manual / Technical Bulletin 1 121.27 KB
AR-507 (serv.man84) Change carried out in the shape of the bushing and the attachment gear in the paper-feeding drive unit. (WHITE) Service Manual / Technical Bulletin 2 137.66 KB
AR-507 (serv.man83) Addition of a binding band carried out to the LSU harness. (WHITE) Service Manual / Technical Bulletin 1 94.44 KB
AR-507 (serv.man82) Measure to improve the performance of the copy lamp. (WHITE) Service Manual / Technical Bulletin 1 114.6 KB
AR-507 (serv.man81) Countermeasure against Z-folding and paper mis-feed. (WHITE) Service Manual / Technical Bulletin 4 552.16 KB
AR-507 (serv.man80) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 134.26 KB
AR-507 (serv.man69) Addition of a gasket carried out to the LSU harness cover. (WHITE) Service Manual / Technical Bulletin 1 87.56 KB
AR-507 (serv.man78) Change carried out in the location of production of the LSU unit. (WHITE) Service Manual / Technical Bulletin 1 87.96 KB
AR-507 (serv.man77) Change carried out in the shape of the locking PAWL of the toner hopper. (WHITE) Service Manual / Technical Bulletin 1 85.34 KB
AR-507 (serv.man76) Change carried out in the maker of the CCD manufactured PWB. (WHITE) Service Manual / Technical Bulletin 1 91.5 KB
AR-507 (serv.man75) Action to alleviate problems of dislocation of the disjunction arm in the ADU unit. (WHITE) Service Manual / Technical Bulletin 1 83.77 KB
AR-507 (serv.man74) Version upgrade carried out on the ROM (E7-11 action). (YELLOW) Service Manual / Technical Bulletin 21.82 KB
AR-507 (serv.man73) Measure to alleviate problems of snagging the copy keys on the operation panel. (YELLOW) Service Manual / Technical Bulletin 1 61.18 KB
AR-507 (serv.man72) Change carried out in the PS front roller bearing. (WHITE) Service Manual / Technical Bulletin 1 83.39 KB
AR-507 (serv.man71) Change carried out in the paper feeding drive frame and the transport clutch. (WHITE) Service Manual / Technical Bulletin 2 119.64 KB
AR-507 (serv.man70) Change carried out in the original document detection photo ensor. (WHITE) Service Manual / Technical Bulletin 1 74.12 KB
AR-507 (serv.man23) New service part for repairing a broken ADU frame Service Manual / Technical Bulletin 2 239.03 KB
AR-507 (serv.man31) RSPF parts change information Service Manual / Technical Bulletin 1 31.68 KB
AR-507 (serv.man30) Corrections made to a jamming error caused by the ADU transfer clutch dragging or slipping Service Manual / Technical Bulletin 1 42.95 KB
AR-507 (serv.man29) HV protect sheet addition Service Manual / Technical Bulletin 1 36.2 KB
AR-507 (serv.man28) Scanner drive PWB change Service Manual / Technical Bulletin 2 60.48 KB
AR-507 (serv.man27) Corrections carried out int eh parts guide (DV unit toner hopper) Service Manual / Technical Bulletin 2 91.78 KB
AR-507 (serv.man26) HDD part change information Service Manual / Technical Bulletin 1 32.72 KB
AR-507 (serv.man25) Paper feed drive unit part change Service Manual / Technical Bulletin 1 30.01 KB
AR-507 (serv.man24) Parts change information Service Manual / Technical Bulletin 2 45.08 KB
AR-507 (serv.man47) Improvement in strength of the RSPF hinge Service Manual / Technical Bulletin 1 38.66 KB
AR-507 (serv.man22) Reduction of F2-00 error. (Toner supply error) Service Manual / Technical Bulletin 2 12.33 KB
AR-507 (serv.man21) Corrections in the parts guide Service Manual / Technical Bulletin 1 56.69 KB
AR-507 (serv.man20) IMPROVEMENT MADE TO PREVENT MALFUNCTION CAUSED BY IMPERFECT CONTACT ON FIXING JUNCTION PWB. Service Manual / Technical Bulletin 1 106.64 KB
AR-507 (serv.man19) Change to the paper feed roller material. Service Manual / Technical Bulletin 13 1.22 MB
AR-507 (serv.man18) Re issue bulletin regarding a parts change - mainly for the mirror mount fixing plate. Service Manual / Technical Bulletin 4 1.6 MB
AR-507 (serv.man17) Improvement made to prevent fire hazard caused by imperfect contact on fixing junction PWB. Service Manual / Technical Bulletin 1 45.23 KB
AR-507 (serv.man16) Change of Fuser Cover Part Number. Service Manual / Technical Bulletin 1 25.47 KB
AR-507 (serv.man33) Establishment of the paper feeding drive clutch with mylar sheet attached as a service part Service Manual / Technical Bulletin 1 30.63 KB
AR-507 (serv.man46) Using the same hand-feed pick-up roller as the 550 paper-feeding unit Service Manual / Technical Bulletin 1 29.8 KB
AR-507 (serv.man45) Parts change information (intake air duct 1, intake air filter, screws, IC) Service Manual / Technical Bulletin 1 30.58 KB
AR-507 (serv.man44) Notice of jam cause codes Service Manual / Technical Bulletin 3 153.47 KB
AR-507 (serv.man43) Part changes Service Manual / Technical Bulletin 1 33.26 KB
AR-507 (serv.man42) ICU PWB part number change Service Manual / Technical Bulletin 1 31.44 KB
AR-507 (serv.man41) Establishment of the CG reverse roller shaft UN and the Reverse roller shaft UN int he 550 paper feeding unit as service parts Service Manual / Technical Bulletin 2 52.22 KB
AR-507 (serv.man40) Change carried out in the material of the reversion gate Service Manual / Technical Bulletin 1 29.82 KB
AR-507 (serv.man38) Supply of silicon oil used for cleaning the SPF glass to be carried out as a service part Service Manual / Technical Bulletin 1 30.82 KB
AR-507 (serv.man37) Notice of jam codes Service Manual / Technical Bulletin 3 58.32 KB
AR-507 (serv.man36) Addition of resistors carried out int he ICU PWB Service Manual / Technical Bulletin 2 53.8 KB
AR-507 (serv.man35) Updgrade of ROM version Service Manual / Technical Bulletin 1 21.09 KB
AR-507 (serv.man34) Parts change information Service Manual / Technical Bulletin 1 30.59 KB
AR-507 (serv.man32) Part change information Service Manual / Technical Bulletin 3 88.01 KB
AR-507 (serv.man39) Copy paper jams caused by grease entering the internal section of the paper feeding drive clutch and supply of Hanari grease as a service part Service Manual / Technical Bulletin 1 34.59 KB
AR-507 (serv.man13) Flash 5.1 Download Utility Driver / Update 16.94 KB
AR-507 (serv.man10) ICU Firmware Version H2.42 Driver / Update 1.1 MB
AR-507 (serv.man11) AR507 OPE Firmware (version 2.42) Driver / Update 1.63 MB
AR-507 (serv.man12) ASPI Update and Check Utility Driver / Update 1.94 MB
AR-507 (serv.man14) AR507 PCU Firmware (version 2.40) Driver / Update 833.14 KB
AR-507 (serv.man15) AR507-Flash 5.1 Upgrade Program Driver / Update 16.93 KB
AR-507 Cougar Handy Guide (Updated March'02) Handy Guide 54 218.68 KB
AR-507 (serv.man9) Cougar Firmware Revision Table FAQ 6 19.71 KB
AR-507 (serv.man8) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-507 (serv.man89) MSDS F-00951 Regulatory Data 2 12.93 KB
AR-507 (serv.man90) MSDS F-00941 Regulatory Data 2 12.32 KB
AR-507 (serv.man91) MSDS F-30951 Regulatory Data 2 11.95 KB
AR-507 (serv.man92) MSDS F-30941 Regulatory Data 2 11.63 KB
AR-507 (serv.man93) Environmental Data Sheet Regulatory Data 1 4.48 KB

RANDOM: