DOWNLOAD Sharp AR-507 (serv.man7) Service Manual ↓ Size: 4.04 MB | Pages: 127 in PDF or view online for FREE

The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the
second groups copies by original. When an optional finisher (AR-FN3) is installed, copy sets can be automatically
stapled. Unstapled sets or groups of copies can be stacked offset from the previous set or group.

Finisher (AR-FN3)

●

The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto A3 (11” x 17”) size paper.

Tray capacity

Top tray:

500 sheets

Second tray:

500 sheets

Offset tray:

1,500 sheets (A4 (8-1/2” x 11”))
750 sheets (larger than A4
(8-1/2” x 11”))

Paper size

Top tray:

A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Second tray:

A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Offset tray:

A4 to A3 (8-1/2" x 11" to 11" x 17")

Paper weight

Top tray:

52 to 128 

g

/m

2

, 176 

g

/m

2

, 200 

g

/m

2

(14 lbs. to 34 lbs., 47 lbs., 53 lbs.)

Second tray:

64 to 105 

g

/m

2

(17 lbs. to 28 lbs.)

Offset tray:

64 to 128 

g

/m

2

 (17 lbs. to 34 lbs.)

For paper weighing more than 105 

g

/m

2

 (28 lbs.), A4

(8-1/2" x 11") is the maximum size.

Offset

30 mm (1.2 inch)

Paper size

A4, A4R, B4, A3

for stapling

(8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")

Stapling capacity

50 sheets (80 

g

/m

2

 (21 lbs.))

(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17")
paper)

Power supply

Drawn from the copier

Weight

Approx. 52 k

g

 (115 lbs.)

Dimensions

590 mm (W) x 560 mm (D) x  998 mm (H)

(23-15/64"(W) x 22-1/16"(D) x  39-19/64"(H))

Specifications are subject to change for improvement without notice.

Finisher release lever

Top tray

Second tray 
(not used in the copy mode)

Stapler unit

Paper transport area cover

Paper feed area cover

Top cover

Offset tray

When copying onto A3 (11" x 17") 
size paper, pull out the metal 
support located at the tip of the 
offset tray.

1

2

3

1

1

1

1

2

1

1

1

2

3

1

Finisher (AR-FN3)

OUTPUT

TOP TRAY

OFFSET

SO

OFFSET

TRAY

In the initial setting, the offset tray will move from side to side so that
each copy set is offset by approximately 30 mm (1.2 inch).
When the offset stack function is disabled, the offset tray will not
move from side to side.
The offset stack function can be enabled or disabled by pressing  the
OUTPUT key and then the “OFFSET” check mark box on the touch
panel.
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
The top tray cannot be used to offset copies.
To select the top tray, press the “TOP TRAY” key on the touch panel.
If the offset tray is selected, copies will be always delivered face
down. If the top tray is selected, copies will be delivered face up or
face down depending on copying settings.

NOTE:
When copying from the bypass tray onto special papers, be sure to
select the top tray. If the offset tray is selected, a misfeed may occur.

When SORT is selected, the SORT (

) icon will be indicated and

copies will be collated by sets.
When STAPLE SORT is selected, the STAPLE SORT (

) icon will

be indicated and collated copies will be stapled automatically.
When the GROUP (

) icon is indicated on the touch panel,

copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.

●

When the RSPF is used for copying, copies will be collated in the
OFFSET mode as the default setting.
When the document glass is used for copying, copies will be
grouped in the OFFSET mode as the default setting.

●

See next page for details.

NOTE:
Rotation copy (image of original will be rotated when the orientation
of the original does not match that of the copy paper) will not function
when the STAPLE SORT mode is set.

1

2

3

3

2

1

3

2

1

3

2

1

1

2

3

3

3

2

3

2

1

1

1

2

1

2

3

2 3

2 3

2 3

1

1

1

Finisher (AR-FN3)

The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x 11", 8-1/2" x
11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled sets cannot be delivered to
the top tray.

●

In the STAPLE SORT mode, copying will automatically stop when the number
of copies output in the offset tray exceeds certain limits regardless of the tray
capacity. In that case, follow the message on the screen. Such limits vary with
the size of copy paper.

NOTE:
Different size originals cannot be copied onto copy paper of their respective sizes
in the STAPLE SORT mode. The paper size selected for the first scanned original
will be used for all originals. To copy different size originals in the STAPLE SORT
mode, select the paper size for the largest original.

●

If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.

●

The stapling position shown in the left figure is the factory de-
fault position.

Finisher (AR-FN3)

EXPOSURE

Stapling position

READY TO COPY.(DOCUMENT FEEDER MODE) 

OUTPUT

TOP TRAY

OFFSET

SORT

OFFSET

TRAY

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO