DOWNLOAD Sharp AR-505 (serv.man6) Service Manual ↓ Size: 655.42 KB | Pages: 10 in PDF or view online for FREE

Model
AR-505 (serv.man6)
Pages
10
Size
655.42 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR505 Service Manual-Installation Setup
File
ar-505-sm6.pdf
Date

Sharp AR-505 (serv.man6) Service Manual ▷ View online

In the case of other models
Insert two projections of the toner cartridge into the notches of the
toner supply port.
5) Move the toner cartridge in the arrow direction until it stops.
In the case of AR-501/505
In the case of other models
6) In the case of AR-501/505
Pull the lever in the direction of the arrow until it breaks off.
Then pull the lever  in the direction of the arrow to remove the
seal.
In the case of other models
Take off the seal end and slowly remove it.
When removing the seal, hold and fix the toner cartridge.
7) Tap the top of the toner cartridge several times.
This is to shake off toner attached to the side surface of the toner
cartridge.
8) Move the empty toner cartridge in the arrow direction and remove
it.
9) Push the toner box to the original position, and put the toner box
lever to the original position.
Sealing tape
AR-505
8/6/1999
4 – 8
10)CLose the front cabinet.
J. Connect the tray connector for RADF
Temporarily fix tray fixing screw (M4 x 8), and connect the RADF
connector with the tray connector.
K. Install the tray
Install the tray as shown in the figure below, and tighten the fixing
screws (2 pcs.).
L. Others
(1) Touch panel contrast adjustment
1) Press the CUSTOM SETTINGS key.
2) Press the "DISPLAY CONTRAST" key on the touch panel.
3) Press the "LIGHTER" or "DARKER" key to adjust the contrast.
4) Press the "OK" key.
Tray side connector
Tray
fixing
screw
ADF side connector
Tray
Tray
fixing
screw
AR-505
4 – 9
8/6/1999
10)CLose the front cabinet.
J. Connect the tray connector for RADF
Temporarily fix tray fixing screw (M4 x 8), and connect the RADF
connector with the tray connector.
K. Install the tray
Install the tray as shown in the figure below, and tighten the fixing
screws (2 pcs.).
L. Others
(1) Touch panel contrast adjustment
1) Press the CUSTOM SETTINGS key.
2) Press the "DISPLAY CONTRAST" key on the touch panel.
3) Press the "LIGHTER" or "DARKER" key to adjust the contrast.
4) Press the "OK" key.
Tray side connector
Tray
fixing
screw
ADF side connector
Tray
Tray
fixing
screw
AR-505
4 – 9
8/6/1999
10)CLose the front cabinet.
J. Connect the tray connector for RADF
Temporarily fix tray fixing screw (M4 x 8), and connect the RADF
connector with the tray connector.
K. Install the tray
Install the tray as shown in the figure below, and tighten the fixing
screws (2 pcs.).
L. Others
(1) Touch panel contrast adjustment
1) Press the CUSTOM SETTINGS key.
2) Press the "DISPLAY CONTRAST" key on the touch panel.
3) Press the "LIGHTER" or "DARKER" key to adjust the contrast.
4) Press the "OK" key.
Tray side connector
Tray
fixing
screw
ADF side connector
Tray
Tray
fixing
screw
AR-505
4 – 9
8/6/1999
Page of 10
Display

Sharp AR-505 (serv.man6) Service Manual ▷ Download