DOWNLOAD Sharp AR-505 (serv.man10) Service Manual ↓ Size: 3.94 MB | Pages: 29 in PDF or view online for FREE

Model
AR-505 (serv.man10)
Pages
29
Size
3.94 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR505 Service Manual-Disassemby, Assembly Maintenance
File
ar-505-sm10.pdf
Date

Sharp AR-505 (serv.man10) Service Manual ▷ View online

[8] DISASSEMBLY, ASSEMBLY, MAINTENANCE
1 Maintenance table
A. AR-250/280/281/285/286/335/336
5 Check (Check, clean, replace or adjust according to necessity.)
 Cleaning     Change   
 Adjustment     Lubrication     Installing position change
Unit/Option name
Part name
Call
80K
160K
240K
320K
Remark
Drum section
OPC Drum
Drum
To be factory attached
Drum
Cleaner Blade
Drum mark sensor
Drum destiny sensor
Drum separation pawl
 
Change the installing position at every 80
K
Toner reception seal
Toner reception auxiliary blade
TC / AC
Charger wire
( ) 
Charger case
Discharge Lamp
Discharge Lamp
Main charger
Charging plate (Saw blade)
Screen grid
( ) 
Developing section Developer Box
DV seal
DSD collar
DV side seal F
DV side seal R
Developer
Developer
To be charged at the time of installation
Toner cartridge
Toner cartridge
To be charged at the time of installation /
To be replaced by user about 17.5 K
Waste toner bottle
Waste toner bottle 
To be replaced by user about every 40 K
Optical section
Mirror base unit
Mirror
Pulley
Copy lamp unit
Refractor
Mirror
Rail
Rail
Glass
Table glass
Dust proof glass
White reference glass
Scanner
Lens
Sensors
Drive belt
Drive wire
OC
OC
Paper feed section Manual feed tray
Rollers
( ) 
[Note 1]
Torque limitor
[Note 1]
Paper tray
Rollers
( ) 
[Note 1]
Brake spring
Torque limitor
 
 
Transport section
Transport
Transport rollers
( ) 
Resist roller
( ) 
Suction
Suction belt
( ) 
Fusing section
Fusing unit 1
Upper heat roller
( ) 
( ) 
( ) 
Lower heat roller
( ) 
( ) 
( ) 
Upper separation pawl
( ) 
Lower separation pawl
( ) 
Insulation bush
Fusing unit 2
Thermistor
Upper heat roller gear
Gears
Paper exit section 2 Tray paper exit unit
Paper exit follower roller
Transport rollers
( ) 
Drive section
Gears
(Specified positions)
Belts
Filters
Print Quality
[Note 1]
Rough guide of replacement intervals
The rollers should be replaced, using the values indicated by the counter of each paper feed port as a rough guide.
500-sheets cassette: 80 K or 2 years (this also applies to built-in 500-sheets container.)
Manual feed tray: 40 K or 2 years
Torque limitor of Manual feed tray: 120 K or 2 years
8 – 1
8/6/1999
B. AR-405
5 Check (Check, clean, replace or adjust according to necessity.)
 Cleaning     Change   
 Adjustment   
Lubrication     Installing position change
Unit/Option name
Part name
Call
90K
180K
270K
360K
Remark
Drum section
OPC Drum
Drum
To be factory attached
Drum
Cleaner Blade
Drum mark sensor
Drum destiny sensor
Drum separation pawl
Change the installing position at
every 90 K
Toner reception seal
Toner reception auxiliary blade
Cleaner side seal F/R
TC / AC
Charger wire
( ) 
Charger case
Discharge Lamp
Discharge Lamp
Main charger
Charging plate (Saw blade)
Screen grid
( ) 
Developing section
Developer Box
DV seal
DSD collar
DV side seal F
DV side seal R
Developer
Developer
To be charged at the time of
installation
Toner cartridge
Toner cartridge
To be charged at the time of
installation / To be replaced by
user about 22 K
Waste toner bottle
Waste toner bottle 
To be replaced by user about
every 40 K
Optical section
Mirror base unit
Mirror
Pulley
Copy lamp unit
Refractor
Mirror
Rail
Rail
Glass
Table glass
Dust proof glass
White reference glass
Scanner
Lens
Sensors
Drive belt
Drive wire
OC
OC
Paper feed section
Manual feed tray
Rollers
( ) 
[Note 1]
Torque limitor
[Note 1]
Paper tray
Rollers
( ) 
[Note 1]
Brake spring
Torque limitor
 
 
Transport section
Transport
Transport rollers
( ) 
Resist roller
( ) 
Suction
Suction belt
( ) 
Fusing section
Fusing unit 1
Upper heat roller
( ) 
( ) 
( ) 
Lower heat roller
( ) 
( ) 
( ) 
Upper separation pawl
( ) 
Lower separation pawl
( ) 
Insulation bush
Fusing unit 2
Thermistor
Upper heat roller gear
Gears
Paper exit section
1 Tray paper exit unit
Paper exit follower roller
Transport rollers
( ) 
( ) 
Drive section
Gears
(Specified positions)
Belts
Filters
TC
Print Quality
[Note 1]
Rough guide of replacement intervals
The rollers should be replaced, using the values indicated by the counter of each paper feed port as a rough guide.
500-sheets cassette: 80 K or 2 years (this also applies to built-in 500-sheets container.)
Manual feed tray: 40 K or 2 years
Torque limitor of Manual feed tray: 120 K or 2 years
8/6/1999
8 – 2
C. AR-501/505
5 Check (Check, clean, replace or adjust according to necessity.)
 Cleaning     Change   
 Adjustment     Lubrication     Installing position change
Unit/Option name
Part name
When
calling
125K
250K
375K
500K
Remark
Drum peripheral
Drum
Installed when shipping (Alldestinations)
Cleaner blade
Toner reception seal
Cleaner side seal F/R
Charger wire (TC/AC)
( )
Screen grid
( )
Drum separation pawl unit
Change the installing position at every 125K. (To
prevent against scratches on the drum)
Waste toner bottle
Replace at every 40K. (By the user)
D. L.
Charger case (MC/TC/AC)
Charging plate (Saw teeth)
Drum density sensor
Drum mark sensor
Developing section
Developer
Supply when installing.
DV seal
DSD collar
DV side seal F
DV side seal R
MG bearing
Toner cartridge
Attach when installing.
EX Japan: Supply toner every 25K with 700g. (User
replacement)
Fusing section
Upper heat roller
( )
Lower heat roller
( )
Upper separation pawl
( )
Lower separation pawl
( )
Thermistor
Clean and remove paper dust.
Upper heat roller gear
Paper guides
Gears
Insulation bush
Cleaning roller
Optical section
Mirror/Lens/Reflector/Sensors
Table glass/Dust-proof glass/OC
RSPF glass
Rails
Drive belt/Drive wire/Pulley
Filters
Paper feed section
Paper feed rollers (manual/550 cassette)
( )
[Note 1]
500 cassette brake spring
Torque limiter (500 cassette)
 
Torque limiter (manual)
[Note 1]
TC
TC paper guide unit
Suction
Suction belt
( )
Separation lamp
Newly provided.
Transport section
PS follower roller
( )
Paper exit reverse
section
Transport rollers
( )
Paper exit follower roller (inside)
Curl correction roller
Transport paper guides
( )
Drive section
Gears
(Specified position)
Belts
Copy quality
Others
Sensors
RSPF
Paper feed section
Pickup roller
( )
[Note 2]
Separation pad
( )
[Note 2]
Paper feed roller
( )
[Note 2]
Resist roller
( )
Transport section
Transport roller
( )
Exposure section
Paper exit section
Paper exit roller
( )
Wipe with alcohol for cleaning.
Others
Sensors
Blow air for cleaning. [Note 3]
[Note 1]
Replacement reference: Replace according to the counter value of each paper feed port.
500-sheeet cassette paper feed roller and related parts: 80K or 2 years
Manual paper feed roller and related parts: 40K or 2 years
Manual feed torque limiter: 120K or 2 years
[Note 2]
Replacement reference: Replace according to the counter value of the document feed unit. : 80K or 2 years
[Note 3]
Clean according to the above descriptions or the counter value of the document feed unit: 50K 
8 – 3
8/6/1999
2. List of disassembly and assembly
Unit
Parts
A. Developing unit
(1) Toner hopper
(2) Developing side seal (F/R)
B. Drum unit
(1) OPC drum
(2) Drum separation pawl
(3) Cleaner blade
(4) Toner reception seal
(5) Main charger 
(6) Transfer/separation charger
C. Discharge lamp
(1) Discharge lamp
D. Scanner unit
(1) Table glass
(2) White reference glass (SPF/RSPF 
  
scanning 
glass)
(3) CCD unit
(4) Copy lamp
(5) Mirror base unit
(6) Copy lamp unit
(7) Rails
(8) Glass section
(9) Scanner section
E. ICU peripheral
(1) HD unit
(2) ICU PWB
(3) SCSI PWB (AR-501/505)
F. Laser unit
(1) Laser scan unit
Unit
Parts
G. Manual paper feed 
  
unit
(1) Manual paper feed sensor
(2) Rollers/torque limiters 
H. 500 tray paper unit
(1) Tray unit
(2) Tray paper feed unit
I. Paper transport unit
(1) Paper transport section
J. Suction unit
(1) Suction unit
K. Fusing unit
(1) Thermistor
(2) Upper fusing separation pawl
(3) Lower fusing separation pawl
(4) Lower heat roller
(5) Upper heat roller
(6) Upper heat roller gear
L. Two-tray paper exit 
 unit
(1) Paper exit/transport roller
M. One-tray paper unit
(1) Paper exit roller
(2) Paper exit/transport roller
N. PCU/AC power/
  
High 
voltage 
power/
  
Main 
motor
(1) PCU/AC power/High voltage power/
  Main 
motor
O. Major drive unit
(1) Major drive unit
P. Lift-up unit
(1) Lift-up unit
O. RSPF
(1) Paper feed section
(2) Transport section
(3) Paper exit section
(4) Others
3. Counter clear
Maintenance cycle setting
SIM21-01
Maintenance counter clear
SIM24-04
At drum replacement
Developing counter clear
SIM24-05
At developer replacement
OPC drum membrane decrease correction counter clear
SIM24-07
At drum replacement
Jam/trouble counter clear
SIM24-01
Paper feed counter clear
SIM24-02
At maintenance
DF/Scan/Stapler counter clear
SIM24-03
At maintenance
Printer, other counter clear
SIM24-09
A. Developing unit
After replacing developer, execute SIM 24-5 to clear the developer
(copy quantity) counter.
(1) Toner hopper
AR-250/280/281/285/286/335/336/405
1
2
8/6/1999
8 – 4
Page of 29
Display

Sharp AR-505 (serv.man10) Service Manual ▷ Download

  • DOWNLOAD Sharp AR-505 (serv.man10) Service Manual ↓ Size: 3.94 MB | Pages: 29 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AR-505 (serv.man10) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-505 (serv.man10) Copying Equipment. Information contained in Sharp AR-505 (serv.man10) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.