Sharp AR-286 (serv.man10) User Manual / Operation Manual ▷ View online
7-29
CHAPTER
7
5
Remove the misfed paper.
6
Rotate the paper feed area cover as shown to open it.
7
Remove the misfed paper.
8
Open the paper guide and remove the misfed paper.
9
Close the paper feed area cover and then close the top
cover.
cover.
10
Push the finisher toward the copier and latch it in
place.
place.
●
Confirm that the misfeed display has cleared.
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
FINISHER (AR-FN2)
7-30
CHAPTER
7
Specifications
Paper size
A4 (8-1/2" x 11")
Paper weight
56 to 105
g
/m
2
(15 lbs. to 28 lbs.)
Paper capacity
3,000 sheets
Weight
Approx. 32 k
g
(70.6 lbs.)
Dimensions
330 mm (W) x 540 mm (D) x 583 mm (H)
(13" (W) x 21-17/64" (D) x 22-61/64" (H))
Specifications are subject to change for improvement without notice.
LARGE CAPACITY TRAY (AR-LC1)
The large capacity tray provides the added convenience of having
3,000 additional sheets of A4 (8-1/2" x 11") paper available.
3,000 additional sheets of A4 (8-1/2" x 11") paper available.
NOTE:
To install the large capacity tray, an optional stand/500-sheet paper
drawer (AR-DE1N) or an equivalent stand must be installed.
To install the large capacity tray, an optional stand/500-sheet paper
drawer (AR-DE1N) or an equivalent stand must be installed.
PART NAMES
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
Paper tray control button
7-31
CHAPTER
7
Loading copy paper
The large capacity tray will automatically lower when the tray runs out
of paper.
of paper.
1
Press the paper tray control button on the large capacity
tray.
tray.
●
The button lamp will blink while the feed table is lowering and
will go out when the tray is ready to be opened.
will go out when the tray is ready to be opened.
2
When the button lamp goes out, pull the paper tray out.
●
Do not pull the paper tray out before the button lamp goes out.
3
Only use paper within the Sharp specification and follow
the paper manufacturer’s instructions regarding fanning
and loading the paper.
the paper manufacturer’s instructions regarding fanning
and loading the paper.
4
Load the paper onto the feed table.
●
Be sure to load paper appropriate for the large capacity tray.
See page 7-30.
See page 7-30.
●
Do not exceed the maximum height line.
5
Gently push the large capacity tray back into place.
●
The paper tray control button lamp will blink as the feed table
returns to the feed position and will light up steadily when it is in
position to feed.
returns to the feed position and will light up steadily when it is in
position to feed.
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
LARGE CAPACITY TRAY (AR-LC1)
Maximum height line
7-32
CHAPTER
7
The copier will stop when a misfeed occurs.
The message “
The message “
A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS FOR RECOVERY INSTRUCTIONS.
” will appear with
a display of paper misfeed locations. Press the INFORMATION (
)
key for more detailed information as necessary.
1
While holding the tray release lever, carefully slide the
large capacity tray away from the copier until it stops.
large capacity tray away from the copier until it stops.
2
Remove any misfed paper from the copier and the large
capacity tray.
capacity tray.
●
Be sure not to tear the misfed paper during removal.
●
Open and close the upper right side cover of the copier after
removing the misfed paper from the copier.
removing the misfed paper from the copier.
If the misfed paper cannot be removed easily, open the upper
right side cover to remove the paper.
right side cover to remove the paper.
Misfeed removal
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
LARGE CAPACITY TRAY (AR-LC1)
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Release lever
Upper
right side
cover
right side
cover
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.