Sharp AR-286 (serv.man10) User Manual / Operation Manual ▷ View online
7-21
CHAPTER
7
Sort and group
SORT mode
Each set of copies will be sequentially delivered to the
offset tray or the top tray as selected.
offset tray or the top tray as selected.
GROUP mode
All copies of the same original will be grouped in the
offset tray or the top tray.
offset tray or the top tray.
STAPLE SORT mode
Collated sets of copies will be stapled and delivered to the
offset tray.
offset tray.
●
See next page for details.
When SORT is selected, the SORT (
) icon will be indicated and
copies will be collated by sets.
When STAPLE SORT is selected, the STAPLE SORT (
) icon will
be indicated and collated copies will be stapled automatically.
When the SORT or STAPLE SORT icon is not indicated on the touch
panel, copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.
When the SORT or STAPLE SORT icon is not indicated on the touch
panel, copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.
●
When the SPF or RADF is used for copying, copies will be collated
at the default setting.
When the document glass is used for copying, copies will be
grouped at the default setting.
at the default setting.
When the document glass is used for copying, copies will be
grouped at the default setting.
●
In the STAPLE SORT mode, only A4 (8-1/2" x 11") paper can be
used.
used.
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2
1
2
3
2 3
2 3
2 3
1
1
1
FINISHER (AR-FN2)
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
7-22
CHAPTER
7
Staple sort
The STAPLE SORT mode staples A4 (8-1/2" x 11") size copies.
Stapled sets cannot be delivered to the top tray.
Stapled sets cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.
Using the SPF/RADF
1
Set the originals in the document feeder tray.
●
If the number of copies in one set is more than 30, the copies
will not be stapled.
will not be stapled.
●
If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
AR-281
AR-286/AR-336
●
If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
will be stapled at an improper position.
AR-281
AR-286/AR-336
2
Press the OUTPUT key.
3
Press the “STAPLE SORT” key on the touch panel.
AR-281
AR-286/AR-336
Stapling position
Stapling position
AUTO
EXPOSURE
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
FINISHER (AR-FN2)
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
7-23
CHAPTER
7
4
Press the “OK” key.
5
Set the number of copies.
●
If A4 (8-1/2" x 11") paper has not been selected, press the
“PAPER SELECT” key and select a paper tray containing
A4 (8-1/2" x 11") paper.
“PAPER SELECT” key and select a paper tray containing
A4 (8-1/2" x 11") paper.
6
Press the START (
) key.
●
When copying of one set is completed, the copies will be
automatically stapled and delivered to the offset tray.
automatically stapled and delivered to the offset tray.
READY TO COPY.
(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
FINISHER (AR-FN2)
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
7-24
CHAPTER
7
Using the document glass
1
Set the original on the document glass with the corner
to be stapled to the upper right.
to be stapled to the upper right.
●
Copy from the last page to the first page.
●
If the number of copies in one set is more than 30, the copies
will not be stapled.
will not be stapled.
●
If the orientation of the original does not match that of the copy
paper, the image of the original will be rotated. The stapling
position in this case is shown below.
paper, the image of the original will be rotated. The stapling
position in this case is shown below.
●
If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
will be stapled at an improper position.
2
Press the OUTPUT key.
3
Press the “STAPLE SORT” key on the touch panel.
4
Press the “OK” key.
Stapling position
AUTO
EXPOSURE
READY TO COPY.
OUTPUT
TOP TRAY
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.
OUTPUT
TOP TRAY
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
FINISHER (AR-FN2)
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.