Sharp AR-286 (serv.man10) User Manual / Operation Manual ▷ View online
7-13
CHAPTER
7
6
Return the lever to its original position.
7
Insert the staple box to the stapler unit until it clicks in
place.
place.
8
Return the stapler unit to face down.
9
Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-14
CHAPTER
7
Misfeed removal
The copier will stop when a misfeed occurs.
The message “
The message “
A MISFEED HAS OCCURRED. CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
” will appear with a display
of paper misfeed locations. Press the INFORMATION (
) key for more
detailed information as necessary.
SF-S15 20-bin sorter
1
While holding the finisher release lever, slide the finisher
away from the copier.
away from the copier.
2
Remove the misfed paper.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Misfeed in the upper transport area
7-15
CHAPTER
7
3
If the misfed paper cannot be removed in step 2, open
the cover of the paper feed area of the finisher.
the cover of the paper feed area of the finisher.
4
Remove the misfed paper.
5
If the misfed paper cannot be removed in step 4, close
the cover of the paper feed area and open the top cover.
the cover of the paper feed area and open the top cover.
6
Remove the misfed paper.
7
Close the top cover.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-16
CHAPTER
7
8
Push the finisher toward the copier and latch it in place.
●
Confirm that the misfeed display is cleared.
Misfeed in the lower transport area
1
While holding the finisher release lever, slide the finisher
away from the copier.
away from the copier.
2
Remove the misfed paper from the paper transport area
as shown in the illustration.
as shown in the illustration.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.