Sharp AR-286 (serv.man10) User Manual / Operation Manual ▷ View online
7-17
CHAPTER
7
3
Open the paper transport area cover of the finisher.
4
Use the transport area lever to open the transport.
5
Remove the misfed paper.
6
Close the transport.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-18
CHAPTER
7
7
Remove the misfed paper.
●
Remove the misfed paper from the paper transport area.
●
If the misfed paper is not seen in the paper transport area, turn
the roller rotating knob to feed the paper.
the roller rotating knob to feed the paper.
8
Close the paper transport area cover.
9
Push the finisher toward the copier and latch it in place.
●
Confirm that the misfeed display is cleared.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
Roller rotating knob
7-19
CHAPTER
7
Paper feed area cover
Top cover
Top tray
Offset tray
Stapler cover
Staple cartridge
CAUTION
Do not put pressure on the finisher or subject it to undue force.
FINISHER (AR-FN2)
The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When the optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
matching the sequence of the originals and the second groups copies by
original. When the optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
PART NAMES
Specifications
Tray capacity
Top tray:
250 sheets
Offset tray: 750 sheets
Paper size
Top tray:
A3 to A6R
(5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
(5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
Offset tray: A4 (8-1/2" x 11")
Paper weight
Top tray:
52 to 128
g
/m
2
(14 lbs. to 34 lbs.)
Offset tray: 56 to 128
g
/m
2
(15 lbs. to 34 lbs.)
For paper weighing more than 105
g
/m
2
(28 lbs.),
A4 (8-1/2" x 11") is the maximum size.
Offset
Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")
Paper size
A4 (8-1/2" x 11")
for stapling
Stapling capacity
30 sheets (80
g
/m
2
(21 lbs.))
Power supply
Drawn from the copier
Weight
Approx. 22 k
g
(49 lbs.)
Dimensions
457 mm (W) x 518 mm (D) x 820 mm (H)
(18"(W) x 20-13/32"(D) x 32-19/64"(H))
Specifications are subject to change for improvement without notice.
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
7-20
CHAPTER
7
Offset stack
In the initial setting, the top tray is selected.
To select the offset tray, press the OUTPUT key and then the
“OFFSET TRAY” key on the touch panel.
If the offset tray is selected, each copy set will be offset by a minimum
of 15 mm for A4 paper (61/64 inch for 8-1/2" x 11" paper).
When the offset stack function is disabled, copies will not be offset.
The offset stack function can be enabled or disabled by pressing the
“OFFSET” check mark box on the touch panel.
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
If the offset tray is selected, only A4 (8-1/2" x 11") paper can be used.
The top tray cannot be used to offset copies.
To select the offset tray, press the OUTPUT key and then the
“OFFSET TRAY” key on the touch panel.
If the offset tray is selected, each copy set will be offset by a minimum
of 15 mm for A4 paper (61/64 inch for 8-1/2" x 11" paper).
When the offset stack function is disabled, copies will not be offset.
The offset stack function can be enabled or disabled by pressing the
“OFFSET” check mark box on the touch panel.
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
If the offset tray is selected, only A4 (8-1/2" x 11") paper can be used.
The top tray cannot be used to offset copies.
OFFSET mode
When copying in the SORT mode, each collated set of
copies will be stacked offset a minimum of 15 mm
for A4 paper (61/64 inch for 8-1/2" x 11" paper) from the
previous set. When copying in the GROUP mode, copies
will be offset and stacked in groups of multiple copies
from the same original.
copies will be stacked offset a minimum of 15 mm
for A4 paper (61/64 inch for 8-1/2" x 11" paper) from the
previous set. When copying in the GROUP mode, copies
will be offset and stacked in groups of multiple copies
from the same original.
NON-OFFSET mode
All copies will be aligned in one stack in the offset tray or
the top tray with no offset.
the top tray with no offset.
OUTPUT
TOP TRAY
OFFSET
SO
OFFSET
TRAY
AUTO
AUTO
1
2
3
1 2
1
1 1
1
1
1
2
3
1
FINISHER (AR-FN2)
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.