Sharp AR-285 (serv.man35) User Manual / Operation Manual ▷ View online
7-21
CHAPTER
7
Loading copy paper
The large capacity tray will automatically lower when the tray runs out
of paper.
of paper.
1
Press the paper tray control button on the large capacity
tray.
tray.
●
The button lamp will blink while the feed table is lowering and
will go out when the tray is ready to be opened.
will go out when the tray is ready to be opened.
2
When the button lamp goes out, pull the paper tray out.
●
Do not pull the paper tray out before the button lamp goes out.
3
Only use paper within the Sharp specification and follow
the paper manufacturer’s instructions regarding fanning
and loading the paper.
the paper manufacturer’s instructions regarding fanning
and loading the paper.
4
Load the paper onto the feed table.
●
Be sure to load paper appropriate for the large capacity tray.
See page 7-20.
See page 7-20.
●
Do not exceed the maximum height line.
5
Gently push the large capacity tray back into place.
●
The paper tray control button lamp will blink as the feed table
returns to the feed position and will light up steadily when it is
in position to feed.
returns to the feed position and will light up steadily when it is
in position to feed.
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
LARGE CAPACITY TRAY (AR-LC1)
Maximum height line
7-22
CHAPTER
7
The copier will stop when a misfeed occurs.
The message “
The message “
A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS
FOR RECOVERY INSTRUCTIONS.
” will appear
with a display of paper misfeed locations. Press the INFORMATION
(
(
) key for more detailed information as necessary.
1
While holding the tray release lever, carefully slide the
large capacity tray away from the copier until it stops.
large capacity tray away from the copier until it stops.
2
Remove any misfed paper from the copier and the large
capacity tray.
capacity tray.
●
Be sure not to tear the misfed paper during removal.
●
Open and close the upper right side cover of the copier after
removing the misfed paper from the copier.
removing the misfed paper from the copier.
If the misfed paper cannot be removed easily, open the upper
right side cover to remove the paper.
right side cover to remove the paper.
Misfeed removal
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
LARGE CAPACITY TRAY (AR-LC1)
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Release lever
Upper
right side
cover
right side
cover
7-23
CHAPTER
7
3
Push the large capacity tray toward the copier and latch
it into place.
it into place.
4
If misfed paper is not found in step 2, pull the tray out.
●
When pulling the large capacity tray out, be sure to pull it out
after the paper tray control button lamp goes out.
after the paper tray control button lamp goes out.
5
Remove the misfed paper.
6
Gently push the tray back into place.
●
Confirm that the misfeed display is cleared.
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1)
LARGE CAPACITY TRAY (AR-LC1)
7-24
CHAPTER
7
Paper size
A4 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight
56 to 105
g
/m
2
(15 lbs. to 28 lbs.)
Paper capacity
500 sheets of paper
Total of 1,000 sheets of paper with an
optional 500-sheet paper drawer installed
Total of 1,000 sheets of paper with an
optional 500-sheet paper drawer installed
Weight
Approx. 25 k
g
(55.2 lbs.)
Dimensions
600 mm (W) x 604 mm (D) x 403 mm (H)
(23-5/8" (W) x 23-25/32" (D) x 15-7/8" (H))
(23-5/8" (W) x 23-25/32" (D) x 15-7/8" (H))
STAND/500-SHEET PAPER DRAWER
(
AR-DE1
)
This optional stand with a paper tray provides the convenience of
increased paper capacity for the copier and a greater choice of
paper sizes readily available for copying. Even greater paper
capacity and size flexibility are available when the stand is equipped
with an optional auxiliary 500-sheet paper drawer (AR-CS1).
The AR-DE1 is available with a 500-sheet paper drawer alone or
with an optional auxiliary 500-sheet paper drawer for the additional
flexibility of two feeds with a total capacity of 1,000 sheets.
increased paper capacity for the copier and a greater choice of
paper sizes readily available for copying. Even greater paper
capacity and size flexibility are available when the stand is equipped
with an optional auxiliary 500-sheet paper drawer (AR-CS1).
The AR-DE1 is available with a 500-sheet paper drawer alone or
with an optional auxiliary 500-sheet paper drawer for the additional
flexibility of two feeds with a total capacity of 1,000 sheets.
PART NAMES
Side cover
500-sheet paper drawer
Optional 500-sheet paper
drawer position
drawer position
Specifications
OPTIONAL EQUIPMENT
Stand/500-sheet paper drawer (AR-DE1)
Click on the first or last page to see other AR-285 (serv.man35) service manuals if exist.