Sharp AR-285 (serv.man35) User Manual / Operation Manual ▷ View online
6-3
CHAPTER
6
PART NAMES AND FUNCTIONS
Interior
GENERAL INFORMATION
Part names and functions
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Document feeder indicators (AR-285/AR-335)
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
RADF exit roller cover (AR-285/AR-335)
Open to remove misfed originals.
Open to remove misfed originals.
RADF feeding roller cover (AR-285/AR-335)
Open to remove misfed originals.
Open to remove misfed originals.
1
Fusing unit
The fusing unit is hot. Exercise care in this area.
The fusing unit is hot. Exercise care in this area.
Transport lever
Turn to open the transport section.
Turn to open the transport section.
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Copy images are formed on the photoconductive
drum.
Corona unit
The unit is used to charge the photoconductive
drum.
The unit is used to charge the photoconductive
drum.
Toner hopper
Contains toner.
Contains toner.
Roller rotating knobs
Turn to remove misfed paper.
Turn to remove misfed paper.
Paper guide
Push down to remove misfed paper.
Push down to remove misfed paper.
Accessories
Operation manual . . . . . . . . . . . . . . . . . . . . . . 1
Toner collecting containers
(including 1 pre-installed at the factory) . . . . . 3
Toner collecting containers
(including 1 pre-installed at the factory) . . . . . 3
6-4
CHAPTER
6
PART NAMES AND FUNCTIONS
Operation Panel
LCD touch panel
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
10-key pad
Used to set the copy quantity.
INTERRUPT (
) key and indicator (p. 2-20)
Interrupts a copy run.
CLEAR ALL (
CA
) key
Clears all selected settings and returns the
copier to the initial settings.
COPY key
Press during standby to display the total output
count.
AUDIT CLEAR (
) key
Closes an open account.
PROGRAM (
P
) key (p. 2-18)
Press to select the job memory mode.
CLEAR (
C
) key
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
START (
) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
SPECIAL MODES key (p.3-1)
Press to select special functions.
Message display
Messages are displayed regarding copier status
and operation.
Paper size display
The sizes of loaded copy paper are displayed
and the selected paper feed location is
highlighted.
indicates the amount of copy paper.
Copy quantity display
Displays the specified number of copies.
Original size display
The original paper size is displayed.
INFORMATION (
) key (p. 1-7)
Press for operation guidance on use of various
features of this copier.
Press for guidance when a misfeed occurs, when
adding toner, or when used toner must be
disposed of.
GENERAL INFORMATION
Part names and functions
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
CA
CLEAR ALL
START
PRINT
COPY
DATA
ON LINE
PRINT
COPY
1
2
3
4
5
6
7
8
9
0
C
P
ACC.#-C
CA
DATA
ON LINE
The key and indicators
are not used for the
copier features.
are not used for the
copier features.
6-5
CHAPTER
6
PART NAMES AND FUNCTIONS
CUSTOM SETTINGS (
) key
Press to set key operator programs or adjust the
contrast of the touch panel.
2-SIDED COPY key
Press to select the 1-sided to 1-sided, 1-sided to
2-sided*, 2-sided to 1-sided (AR-285 and AR-335
only) or 2-sided to 2-sided (AR-285 and AR-335
only) copy mode.
* To select the 1-sided to 2-sided copy mode on
the AR-280, an optional duplex module
(AR-DU1) must be installed.
OUTPUT key
Press to select the finisher mode: SORT or
GROUP.
EXPOSURE display
Indicates the selected exposure mode.
EXPOSURE key (p. 2-16)
Press to select the exposure mode: AUTO,
TEXT, TEXT/PHOTO, or PHOTO.
PAPER SELECT display
Displays the selected paper size. When “AUTO”
is displayed, paper size matching the original and
copy ratio will be automatically selected.
PAPER SELECT key
Press to select the desired paper tray.
COPY RATIO display
Displays the copy ratios for reductions or
enlargements.
COPY RATIO key
Press to select a reduction or enlargement copy
ratio or select the automatic copy ratio selection
mode.
REVIEW (
) key
Press to check the settings of selected functions.
Initial settings
The copier assumes the initial settings when the
CLEAR ALL (
The copier assumes the initial settings when the
CLEAR ALL (
CA
) key is pressed and approximately
1 minute after the last copy is made in any mode.
Except for the paper tray selection, the copier also
assumes the initial setting when it is turned on.
Except for the paper tray selection, the copier also
assumes the initial setting when it is turned on.
●
Copy ratio: 100%
●
Automatic exposure
●
Copy quantity: 0
●
All special copier modes are set to off.
●
Tray select: Paper tray 1 (At power on, the
previously selected tray will again be selected.)
Optional large capacity tray will be selected when
installed.
previously selected tray will again be selected.)
Optional large capacity tray will be selected when
installed.
★ KEY OPERATOR
Initial settings can be
programmed as desired. The auto clear time can also
be changed. See pages 8-17 and 8-21.
be changed. See pages 8-17 and 8-21.
GENERAL INFORMATION
Part names and functions
Touch Panel (Basic screen)
Depending on the country or
area, some keys will be indicated
with either an English name or a
symbol.
area, some keys will be indicated
with either an English name or a
symbol.
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1. A4
2. A3
A4
ORIGINAL
A4R
Inch system
ORIGINAL
AUTO 8/ 11
1
2
1.8/ 11
2.11 17
1
2
8/ 11
1
2
8/ 11R
1
2
6-6
CHAPTER
6
USER MAINTENANCE
The document glass and the document cover (RADF transport belt)
must be kept clean to avoid dirty areas from being copied onto the
copies.
must be kept clean to avoid dirty areas from being copied onto the
copies.
Document glass and document cover
Wipe the document glass and the document cover
(RADF transport belt) with a soft, clean cloth.
(RADF transport belt) with a soft, clean cloth.
●
If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.
benzene, or similar volatile cleaning agents.
GENERAL INFORMATION
User maintenance
Click on the first or last page to see other AR-285 (serv.man35) service manuals if exist.