DOWNLOAD Sharp AR-205 (serv.man26) Service Manual ↓ Size: 1.37 MB | Pages: 44 in PDF or view online for FREE

 Misfeed removal

●

The misfeed (

) indicator will go out.

Before opening the upper paper tray, be sure to open the bypass tray, lift
slightly on the side cover and slide the cover out until it stops, and then
perform steps 1 to 3 described in the “A. Misfeed in the paper feed area”
section.

●

The misfeed (

) indicator will go out.

 Misfeed removal

●

Be careful not to tear the misfed paper during removal.

●

Be careful not to tear the misfed paper during removal.

●

The misfeed (

 ) indicator will go out.

Maintenance required

When the

 

 

indicator lights up, service by an authorised SHARP service

technician is required. Contact your service centre as soon as possible.

1

Auto clear time

Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.

2

Preheat mode

Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 45.

3

Auto power shut-off

Sets the time that elapses before the copier enters the auto power

timer

shut-off mode after any operation is made. See page 45.

4

Stream feeding

Enables or disables  the stream feeding mode when an optional SPF or

mode*

RSPF is installed. See page 58.

5

Auto power shut-off

Enables or disables the auto power shut-off mode. See page 45.

setting

6

Border line for 2 in 1 or

Enables or disables the border line which is printed in 2 in 1 or 4 in 1

4 in 1*

copying when an optional electronic sorting kit and an optional SPF or
RSPF are installed. See page 67.

7

Rotation copy*

Enables or disables rotation of original images. See page 64.

8

Auto paper select mode

Enables or disables the auto paper selection. See page 14.

9

Auto tray switching

Enables or disables the automatic tray switching which occurs when paper
in a tray runs out. (This switching cannot switch to the bypass tray.)

10

Auditing mode

Enables or disables the auditing mode, which controls access to the
copier. See page 13.

11

Account number entry

Registers accounts for auditing mode.

12

Account number

Changes account numbers for auditing mode.

change

13

Account number

Deletes accounts for auditing mode.

deletion

14

Number of copies

Displays the total number of copies made against account numbers.

per account

15

Resetting account

Resets all audit accounts or resets any desired individual account.

16

Erase width adjustment*

Sets the amount of the edge erase and centre erase areas. See page 69.

17

Layout in 2 in 1 copy*

Selects a pattern for 2 in 1 copying. See page 67.

18

Layout in 4 in 1 copy*

Selects a pattern for 4 in 1 copying. See page 67.

19

Offset of paper output

Enables or disables the offset function of the paper output tray. The offset

tray

function can be specified respectively for the upper and lower areas
separated by an optional job separator tray. See page 65.

20

Image rotation in

Enables or disables image rotation (180

°

) of the front side in one-sided to

duplex copying

two-sided copying or two-sided to one-sided copying. See page 62.

22

Location of the margin*

Selects the location of the expanded margin. See page 71.

* These programs do not affect the copier functions unless certain optional equipment is installed.

User programs

The user programs allow the parameters of certain functions to be set,
changed, or cancelled as desired.

This copier has the following user programs.