Sharp AR-205 (serv.man26) User Manual / Operation Manual ▷ View online
31
ST
A
A
TUS
INDICA
T
ORS
DRUM CARTRIDGE REPLACEMENT
Drum cartridge replacement
5
Remove the new drum cartridge from the protective bag
and gently insert the lead end of the drum cartridge
along the guides.
and gently insert the lead end of the drum cartridge
along the guides.
Do not touch the surface of the drum (green portion) of
the cartridge. Doing so may cause smudges on the
copies.
the cartridge. Doing so may cause smudges on the
copies.
6
Remove the protective cover from the drum cartridge
and then push the cartridge all the way into the copier.
and then push the cartridge all the way into the copier.
7
Gently install the TD cartridge. To install the TD cartridge,
see page 28, TD CARTRIDGE REPLACEMENT.
see page 28, TD CARTRIDGE REPLACEMENT.
8
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The drum replacement required
(
hands and then close the side cover by pressing the
handle on the cover. The drum replacement required
(
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
32
ST
A
A
TUS
INDICA
T
ORS
The copier will stop when a misfeed occurs. The misfeed
(
(
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.
remove all pieces.
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.
First confirm the misfeed location.
MISFEED REMOVAL
Misfeed removal
Misfeed in the bypass tray
1
Gently pull the misfed paper out.
2
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
until it stops. Close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
Misfeed in the copier
1
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
slide the cover out until it stops.
(
P.63)
(
P.32, 35)
(
P.36)
(
P.73)
33
ST
A
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“B. Misfeed in the fusing area”.
“B. Misfeed in the fusing area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
“A. Misfeed in the paper feed area”.
2
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
following the instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1
Push gently on both sides of the front cover to open the
cover.
cover.
2
Carefully remove the misfed paper. Turn the roller
rotating knob in the direction of the arrow to assist in
removing it.
rotating knob in the direction of the arrow to assist in
removing it.
The fusing unit is hot. Take care in removing paper.
Do not touch the surface of the drum (green portion) of
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
3
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
hands and then close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B. Misfeed in the fusing area
1
Push gently on both sides of the front cover to open the
cover.
cover.
Roller rotating knob
34
ST
A
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
2
Turn the roller rotating knob in the direction of the
arrow.
arrow.
3
Carefully remove the misfed paper. Lower the fusing
unit release levers to allow easier removal. Return the
release levers to their operating positions.
unit release levers to allow easier removal. Return the
release levers to their operating positions.
The fusing unit is hot. Take care in removing paper.
●
Do not touch the surface of the drum (green portion)
of the drum cartridge when removing the misfed
paper. Doing so may damage the drum and cause
smudges on copies.
of the drum cartridge when removing the misfed
paper. Doing so may damage the drum and cause
smudges on copies.
●
Be careful about unfixed toner on the misfed paper
not to soil your hands or clothes.
not to soil your hands or clothes.
4
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
hands and then close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C. Misfeed in the transport area
1
Open the paper guide by pressing down the projection
on either side of the guide and remove the misfed paper.
on either side of the guide and remove the misfed paper.
The fusing unit is hot. Take care in removing paper.
2
If the misfed paper cannot be removed by the previous
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
Roller rotating knob
Fusing unit release lever
Click on the first or last page to see other AR-205 (serv.man26) service manuals if exist.