Sharp AR-205 (serv.man26) User Manual / Operation Manual ▷ View online
23
MAKING COPIES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
(
) key. The vertical and horizontal ratios will be alternately displayed.
7
Ensure that the desired paper tray is selected.
8
Enter the desired number of copies.
9
Press the START key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
RATIO selector (
,
) key or a zoom (
,
)
key. Then, perform step 3 and the succeeding
steps.
steps.
●
To cancel this function, press the XY-ZOOM key
again.
again.
24
MAKING COPIES
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
●
When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is cancelled, the MANUAL mode will not auto-
matically be cancelled.
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is cancelled, the MANUAL mode will not auto-
matically be cancelled.
1
Place the original on the original table and close the
platen cover.
platen cover.
2
Press the B/W REVERSE key.
3
Ensure that the desired paper tray is selected.
4
Make all other desired copier selections and press the
START key.
START key.
B/W reverse
Original
Copy
25
MAKING COPIES
1
Place the originals on the original table with the centre
of the two pages aligned with the paper size index (
A4). Close the platen cover.
of the two pages aligned with the paper size index (
A4). Close the platen cover.
●
Set the page to be copied first to the right of the paper size index mark.
2
Press the DUAL PAGE COPY key.
●
Check to be sure that A4 sized copy paper is selected.
3
Set the number of copies.
4
Press the START key.
DUAL PAGE COPY
The DUAL PAGE COPY feature produces individual copies of two documents
placed side by side on the original table. It is especially useful when copying
books and other bound documents. This feature cannot be used with the 2 in
1 or 4 in 1 feature and sort/group feature. (The 2 in 1 or 4 in 1 feature and sort/
group feature can only be used when an optional electronic sorting kit and an
optional SPF or RSPF are installed.) If the AUTO IMAGE feature has been
selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
placed side by side on the original table. It is especially useful when copying
books and other bound documents. This feature cannot be used with the 2 in
1 or 4 in 1 feature and sort/group feature. (The 2 in 1 or 4 in 1 feature and sort/
group feature can only be used when an optional electronic sorting kit and an
optional SPF or RSPF are installed.) If the AUTO IMAGE feature has been
selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
Dual page copy
Original
Copy
26
MAKING COPIES
1
Press the INTERRUPT key.
●
The copier will return to the initial settings.
●
If this copier has been programmed in the auditing mode using user
program No. 10, “
program No. 10, “
–––
” will appear in the copy quantity display. Enter
your account number using the numeric keys. The number of copies
of the interrupt copying will be accumulated against this account
number. See page 13.
of the interrupt copying will be accumulated against this account
number. See page 13.
●
When an optional SPF or RSPF is being used, the copier will stop after
completing the copying of the original which has been fed into the SPF
or RSPF.
completing the copying of the original which has been fed into the SPF
or RSPF.
2
When the copier stops to place an original for interrupt
copying on the original table or remove any remaining
originals on the SPF or RSPF and replace with originals
for interrupt copying via the SPF or RSPF.
copying on the original table or remove any remaining
originals on the SPF or RSPF and replace with originals
for interrupt copying via the SPF or RSPF.
3
Select the desired available copier functions.
4
Set the number of copies.
5
Press the START key.
●
The interrupt copies will be offset from the previous copies when user
program No. 19 is enabled. See page 38.
program No. 19 is enabled. See page 38.
6
When all INTERRUPT copies are finished, press the
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
●
The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
will be automatically restored.
7
Replace the original(s) for the interrupted job and press
the START key to resume copying.
the START key to resume copying.
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
done.
●
Sort or group cannot be selected during interrupt copying. (Sort and group
can be performed only if an optional electronic sortring kit and an optional
SPF or RSPF are installed.)
can be performed only if an optional electronic sortring kit and an optional
SPF or RSPF are installed.)
●
INTERRUPT will not function during two-sided copying.
●
Two-sided copying cannot be performed during INTERRUPT copying.
Interrupting a copy run
Click on the first or last page to see other AR-205 (serv.man26) service manuals if exist.