DOWNLOAD Sharp AR-155 (serv.man23) Service Manual ↓ Size: 4.79 MB | Pages: 56 in PDF or view online for FREE

1

Getting started

This chapter provides basic information for using the copier.

This copier has been designed to provide intuitive operating ease while requiring a minimum
amount of space. To get full use of all copier features, be sure to familiarise yourself with this
manual and the copier.
For quick reference during copier use, keep this manual in a handy location.

This copier can also be used as a laser printer if an optional printer expansion
kit is installed. This manual describes only the copier features. For description
of the printer features, see the separate manual.

In this manual, the following icons are used to provide the user with information pertinent to the
use of the copier.

Warns the user that injury to the user or damage to the copier may result if the
contents of the warning are not properly followed.

Cautions the user that damage to the copier or one of its components may
result if the contents of the caution are not properly followed.

Notes provide information relevant to the copier regarding specifications,
functions, performance, operation and such, that may be useful to the user.

Indicates a letter displayed in the display.

When references are made to paper sizes and weights, the inch series values are quoted in
brackets.
For example:
Page 40 --------------------- 56 to 80 

g

/m

2

 (15 lbs. to 21 lbs.)

A4 (8-1/2" x 11")

1

Getting started

Follow the cautions below when using this copier.

●

The fusing area is hot. Exercise care in this area when removing misfed
paper.

●

Do not look directly at the light source. Doing so may damage your eyes.

●

Do not switch the copier rapidly on and off. After turning the copier off, wait
10 to 15 seconds before turning it back on.

●

Copier power must be turned off before installing any supplies.

●

Place the copier on a firm, level surface.

●

Do not install the copier in a humid or dusty location.

●

When the copier is not used for long time, for example for consecutive holidays,
turn the power switch off and remove the power cord from the outlet.

●

When moving the copier, be sure to turn the power switch off and remove the
power cord from the outlet.

●

Do not cover the copier with a dust cover, cloth or plastic film while the power
is on. Doing so may prevent heat radiation, damaging the copier.

Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.

Wave length

785 nm ±15 nm

Pulse times

(4.0 µs ±4 ns)/7 mm

Output power

0.25 mW - 0.50 mW

1

Getting started

●

Since warm-up time is zero, copying can be started immediately after the power switch
is turned on.

●

First-copy time is only 9.6 seconds (normal mode).

●

Copying speed is 15 copies/min., which adapts to business use, allowing improvement
of working efficiency.

●

High-quality image copying at 600 dpi can be performed.

●

In addition to the automatic exposure mode, the manual exposure can be adjusted in
five steps.

●

The photo mode copying function allows clear copying of delicate halftone original images
such as monochrome photos and colour photos.

●

Zoom copying from 50% to 200% in 1% increments can be performed.

●

Continuous copying of maximum 99 sheets can also be performed.

●

Automatic document feeding through the reversing single pass feeder (RSPF) can be
performed.

●

Toner save mode reduces toner consumption by approximately 10%.

●

User programs allow setting/modification of functions for customer’s needs.

●

Automatic two-sided copying can be performed.

●

This copier is equipped with a 1-page memory buffer. This Memory allows the
copier to scan an original once only and make up to 99 copies. This feature allows for
improved workflow, reduced operating noise from the copier and reduced wear and tear
on the scanning mechanism. This feature provides for a higher reliability.

●

This copier can be used as a laser printer by installing an optional printer expansion kit.

●

Paper output tray is housed in the copier for space saving.

●

Preheat mode and auto power shut-off mode are provided to reduce power consumption
in standby mode.

This copier does not have an internal calendar or clock.
This copier will not be affected by the year 2000.

1

Getting started

RSPF exit area

Original guides

Feeding roller cover

Document
feeder tray

Original table

Operation 
panel

Paper tray

Front cover

Original cover

Side cover

Power cord socket

Power switch

Handle

Cover for optional printer interface 
* A printer expansion kit is optional.

Bypass tray guides

Bypass tray

Paper output 
tray

Paper output tray
extension

Handle

Side cover 
open button

TD cartridge lock release 
button

TD cartridge

Drum cartridge

Drum cartridge handle

Transfer charger

Fusing unit 
release lever

Charger cleaner