Sharp AR-155 (serv.man23) User Manual / Operation Manual ▷ View online
19
2
Making copies
Print face
Press the tray select (
) key to select the bypass tray. Set the number of copies if
using standard copy paper. Press the print (
) key.
BYPASS FEED
20
3
Special functions
SPECIAL FUNCTIONS
DESCRIPTION OF SPECIAL FUNCTIONS
This chapter describes the special functions of this copier. Use these functions as needed.
Toner save mode
Reduces toner consumption by approximately 10%.
Power save modes (page 21)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
mode.
●
Preheat mode
When the copier enters the preheat mode, the power save (
When the copier enters the preheat mode, the power save (
) indicator will light up and
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
) key using the normal copying
procedure.
●
Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save (
When the copier enters the auto power shut-off mode, the power save (
) indicator will light
up and other indicators will go out. The auto power shut-off mode saves more power than the
preheat mode but requires a longer time before starting copying. To copy from the auto
power shut-off mode, press the print (
preheat mode but requires a longer time before starting copying. To copy from the auto
power shut-off mode, press the print (
) key. Then make desired copier selections and
press the print (
) key using the normal copying procedure.
Auto clear (page 21)
The copier returns to the initial settings a preset amount of time after the last copy is made.
This preset amount of time (auto clear time) can be changed.
This preset amount of time (auto clear time) can be changed.
Stream feeding mode (page 21)
For description of the stream feeding mode, see page 16.
TONER SAVE MODE
Press the exposure mode selector key to select the manual (
) mode.
21
3
Special functions
TONER SAVE MODE
Press and hold down the exposure mode selector key for approximately 5 seconds.
The manual (
The manual (
) indicator will go out and the photo (
) indicator will begin to blink.
The exposure indicator marked “5” will light up, indicating the standard toner mode is
active.
active.
To enter the toner save mode, press the light (
) key.
The exposure indicator marked “1” will light up, indicating the toner save mode is
selected.
selected.
Press the exposure mode selector key twice. The photo (
) indicator will stop blinking
and the AUTO indicator will light up steadily. The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark (
)
key to select exposure level “5” in step 3.
USER PROGRAMS (power save modes, auto
clear time, stream feeding mode)
clear time, stream feeding mode)
The user programs allow the parameters of certain functions to be set, changed, or cancelled
as desired.
as desired.
Setting the power save modes, auto clear time, and stream feeding mode
Press and hold down the light (
) and dark (
) keys simultaneously for more than
5 seconds until all the alarm indicators (
,
,
and
) blink and “– –” appears in
the display.
Use the left copy quantity (
) key to select a user program number (1: auto clear
time, 2: preheat mode, 3: auto power shut-off timer, 4: stream feeding mode, 5: auto
power shut-off mode). The selected number will blink in the left side of the display.
power shut-off mode). The selected number will blink in the left side of the display.
22
3
Special functions
USER PROGRAMS
Press the print (
) key. The entered program number will be steadily lit and the
currently selected parameter number for the program will blink on the right side of the
display.
display.
Select the desired parameter using the right copy quantity (
) key. The entered
parameter number will blink on the right of the display.
Program
Mode
Parameters
No.
1
Auto clear time
0
OFF
1
30 sec. * 2
60 sec.
3
90 sec.
4
120 sec.
5
10 sec.
2
Preheat mode
0
30 sec.
1
60 sec. * 2
90 sec.
3
Auto power shut-
0
2 min.
* 1
5 min.
2
15 min.
off timer
3
30 min.
4
60 min.
5
120 min.
4
Stream feeding
0
OFF
* 1
ON
mode
5
Auto power shut-
0
OFF
* 1
ON
off mode
Factory default settings are indicated with an asterisk (*).
Press the print (
) key. The right-hand number in the display will be steadily lit and
the entered value will be stored.
To change the setting or to set another mode, press the clear (
) key. The
copier will return to step 2.
Press the light (
) or dark (
) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press the clear (
) key to reset the display to zero.
Press and hold down the clear (
) key for approximately 5 seconds. The total number
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
Click on the first or last page to see other AR-155 (serv.man23) service manuals if exist.