DOWNLOAD Sharp AR-153EN (serv.man8) Service Manual ↓ Size: 1.82 MB | Pages: 72 in PDF or view online for FREE

The application, demonstration, system and other software accompanying this License, whether on disk, 

in read only memory, or on any other media (the "Software") and related documentation are licensed to 

you by SHARP.  You own the disk on which the Software is recorded but SHARP and/or SHARP'S 

Licensors retain title to the Software and related documentation. This License allows you to use the 

Software on one or more computers connected to a single printer and make one copy of the Software in 

machine-readable form for backup purposes only.  You must reproduce on such copy the SHARP 

copyright notice, the copyright notice of SHARP’S Licensors and any other proprietary legends of  

SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer all 

your license rights in the software, the backup copy of the Software, the related documentation and a 

copy of this License to another party, provided the other party reads and agrees to the terms and 

conditions of this License.

The Software contains copyrighted material, trade secrets and other proprietary material which is owned 

by SHARP and/or its Licensors and in order to protect them you may not decompile, reverse engineer, 

disassemble or otherwise reduce the Software to a human-perceivable form. You may not modify, 

network, rent, lease, loan, distribute or create derivative works based upon the Software in whole or in 

part.  You may not electronically transmit the Software from one computer to another or over a network.

This license is effective until terminated.  You may terminate this License at any time by destroying the 

Software and related documentation and all copies thereof.  This License will terminate immediately 

without notice from SHARP and/or SHARP’S Licensors if you fail to comply with any provision of this 

License.  Upon termination you must destroy the Software and related documentation and all copies 

thereof.

You agree and certify that neither the Software nor any other technical data received from SHARP, nor 

the direct product thereof, will be exported outside the United States except as authorized and as 

permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by 

you outside of the United States, you agree that you will not re-export the Software nor any other 

technical data received from SHARP, nor the direct product thereof, except as permitted by the laws and 

regulations of the United States and the laws and the regulation of the jurisdiction in which you obtained 

the Software.

If you are acquiring the Software on behalf of any unit or agency of the United States Government, the 

following provisions apply.  The Government agrees:

(i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as 

"Commercial Computer Software" and the Government is acquiring only "restricted rights" in the 

Software and its documentation as that term is defined in Clause 252.227-7013 (c)(1) of the 

DFARS; and 

(ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, 

the Government's rights in the Software and its documentation will be as defined in Clause 52.227-

19 (c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of the NASA 

Supplement to the FAR. 

SHARP warrants the disks on which the Software is recorded to be free from defects in materials and 

workmanship under normal use for a period of ninety (90) days from the date of purchase as evidenced 

by a copy of the receipt.  The entire liability of SHARP and/or its Licensors and your exclusive remedy 

will be replacement of the disk which fails to meet the limited warranty provided by this Clause 6.  A disk 

will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the 

receipt.  SHARP will have no responsibility to replace a disk damaged by accident, abuse or 

misapplication.
ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN 

DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY.  THIS WARRANTY 

GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH 

VARY FROM JURISDICTION TO JURISDICTION. 

You expressly acknowledge and agree that use of the Software is at your sole risk.  The software and 

related documentation are provided "AS IS" and without warranty of any kind and SHARP and SHARP'S 

Licensor(s) (for the purpose of provisions 7 and 8, SHARP and SHARP'S Licensor(s) shall be 

collectively referred to as "SHARP") EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  SHARP DOES NOT 

WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR 

REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE 

UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE 

CORRECTED.  FURTHERMORE, SHARP DOES NOT WARRANT OR MAKE ANY 

REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE 

SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, 

ACCURACY, RELIABILITY, OR OTHERWISE.  NO ORAL OR WRITTEN INFORMATION OR 

ADVICE GIVEN BY SHARP OR A SHARP AUTHORIZED REPRESENTATIVE SHALL CREATE 

A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.  SHOULD 

THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT SHARP OR A SHARP AUTHORIZED 

REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR 

OR CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED 

WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL SHARP BE LIABLE FOR 

ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE 

USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF 

SHARP OR A SHARP AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES.  SOME JURISDICTIONS DO NOT ALLOW THE 

LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL 

DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

In no event shall SHARP'S total liability to you for all damages, losses, and causes of action (whether in 

contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software.

For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be 

governed by and construed in accordance with the laws of the state of California and Washington, 

respectively.  If for any reason a court of competent jurisdiction finds any provision of this License, or 

portion thereof, to be unenforceable, that provision of the License shall be enforced to the maximum 

extent permissible so as to effect the intent of the parties, and the remainder of this License shall continue 

in full force and effect.

This License constitutes the entire agreement between the parties with respect to the use of the Software and 

related documentation, and supersedes all prior or contemporaneous understandings or agreements, written 

or oral, regarding such subject matter.  No amendment to or modification of this License will be binding 

unless in writing and signed by a duly authorized representative of SHARP.

The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are
applicable to the product. (This sentence is not applicable in any country where the above directives are not required.)

Required in Appendix ZB of BS 7002 (En 60 950) – United Kingdom

The mains lead of this equipment is already fitted with a mains plug which is either a non-
rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or
ASTA approved fuse to BS1362 marked 

 or 

 and of the same rating as the one

removed from the plus must be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the
plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied either cut-off the moulded plug (If this type is fitted) or remove by undoing the
screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code
below.

DANGER: The fuse should be removed from the cut-off plug and the plug destroyed
immediately and disposed of in a safe manner. Under no circumstances shold the cut-off
plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur.

To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:

As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in
the plug which is marked with the letter E, or by the safety earth symbol 

, or coloured

green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured black.

Printed in France

TINSE0817TSZZ