Sharp AR-153EN (serv.man8) User Manual / Operation Manual ▷ View online
59
7
CONNECTING THE INTERFACE CABLE
This unit includes both USB and parallel interface connectors.
Interface cables for connecting the unit to your computer are not included with this
unit. Please purchase the appropriate cable for your computer.
Interface cables for connecting the unit to your computer are not included with this
unit. Please purchase the appropriate cable for your computer.
Interface cable
Parallel interface cable
IEEE 1284-Shielded type bi-directional parallel interface cable (2 m Max.)
USB interface cable
Shielded twisted pair cable, high-speed transmission equivalent (2 m Max.)
Connecting the USB interface cable
1
Obtain a shielded USB interface cable.
2
Insert the cable into the USB interface
connector located on the rear of the
unit.
connector located on the rear of the
unit.
3
Insert the other end of the cable into the interface connector of
your computer, or the USB hub connected to your computer.
your computer, or the USB hub connected to your computer.
•
If you intend to use the unit as a scanner, it must be connected
to your computer with a USB interface cable. The scanner
function cannot be used if the unit is connected with a parallel
cable.
to your computer with a USB interface cable. The scanner
function cannot be used if the unit is connected with a parallel
cable.
•
USB is available with a PC/AT compatible computer that was
originally equipped with USB and had Windows 98, Windows Me,
Windows 2000 Professional, Windows XP Professional or Windows
XP Home Edition preinstalled.
originally equipped with USB and had Windows 98, Windows Me,
Windows 2000 Professional, Windows XP Professional or Windows
XP Home Edition preinstalled.
•
Do not connect the interface cable before installing the MFP driver.
The interface cable should be connected during installation of the
MFP driver. (p.35)
The interface cable should be connected during installation of the
MFP driver. (p.35)
60
Connecting the parallel interface cable
1
Obtain an IEEE1284 shielded parallel interface cable.
2
Ensure that your computer and unit are turned off.
3
Insert the cable into the parallel
interface connector located on the
rear of the unit, and fasten with
clasps.
interface connector located on the
rear of the unit, and fasten with
clasps.
4
Insert the other end of the cable into the interface connector of
your computer.
your computer.
61
8
SPECIFICATIONS
Model
AR-122E
AR-122EN
AR-152E
AR-152EN
Type
Digital laser copier, desk-top type
Copy system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Paper tray
250 sheets (Paper tray) 1 sheet (Single bypass)
Paper output tray
100 sheets
Original sizes
Max. A4
Original feed
1 sheet
Copy size
A6 to A4 *
1
Image loss
Max. 4mm *
2
Max. 4.5mm *
3
Copy speed
12 pages/min.
15 pages/min.
Continuous copying
Max. 99 pages subtractive counter
First-copy time
(Approximately)
(Approximately)
9.6 seconds
(paper:A4, exposure mode:AUTO, copy ratio:100% )
(paper:A4, exposure mode:AUTO, copy ratio:100% )
Copy ratio
Variable:25% to 400% in 1% increments (total 376 steps)
Fixed: 25%, 70% 86%, 100%, 141%, 400%
Fixed: 25%, 70% 86%, 100%, 141%, 400%
Exposure system
Moving optical source, slit exposure (stationary platen)
with automatic exposure
with automatic exposure
Fusing system
Heat rollers
Development system
Magnetic brush development
Light source
Cold cathode fluorescent lamp
Resolution
600 x 300dpi (Auto/Manual mode)
600 x 600dpi (Photo mode)
600 x 600dpi (Photo mode)
Gradation
2 levels
Bit depth
1 bit or 8 bit/pixel
Sensor
Colour CCD
Memory
8 MB
Power supply
Local voltage
±
10% (For this copier power supply, see the
name plate located on the back of the unit)
Power consumption
1000 W
Overall
dimensions
dimensions
Width
607.6mm
Depth
462.5mm
Weight (Approximately) *
4
16k
g
8
APPENDIX
62
*
1
Feed paper lengthwise only.
*
2
Leading and trailing edges.
*
3
Along the other edges in totals.
*
4
Not includes toner and drum cartridges.
Optional equipment
Printer/Scanner Expansion Kit (AL-12PKM)
*
1
Feed paper lengthwise only.
Unit dimensions
Width
518mm
Depth
462.5mm
Height
295.6mm
Operating conditions
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Humidity: 20% to 85%
Noise level
Sound Power Level L
wA
(1B=10dB)
Copying: 6.0 [B], Standby: 3.7 [B]
Sound Pressure Level L
Sound Pressure Level L
pA
(bystander positions)
Copying: 46 [dB (A)], Standby: 23 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measurement according to
RAL-UZ 62)
(measurement according to
RAL-UZ 62)
Ozone: less than 0.02 m
g/m
3
Dust: less than 0.075 m
g/m
3
Styrene: less than 0.07 m
g/m
3
Optional equipment
Printer/Scanner Expansion Kit (AL-12PKM)
Printing system
Dry, electrostatic transfer
Printing size
A6 to A4 *
1
Print speed
Max. 12 pages/min. (A4)
Continuous printing
Max. 99 pages subtractive counter
First-print time (Approximately) 9.6 seconds (Paper: A4)
Resolution
Printer
600 dpi
Scanner
600 x 1200 dpi
Emulation
SHARP GDI
Page orientation
Portrait or landscape
Interface port
USB interface (USB1.1 Standard) /
IEEE1284-compliant bi-directional parallel interface (Only
for printer)
IEEE1284-compliant bi-directional parallel interface (Only
for printer)
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
Model
AR-122E
AR-122EN
AR-152E
AR-152EN
Click on the first or last page to see other AR-153EN (serv.man8) service manuals if exist.