Sharp AL-1566 (serv.man40) User Manual / Operation Manual ▷ View online
MATERIAL SAFETY DATA SHEET
Data Revised: Jun.28.2002
Data Issued:
Data Issued:
Nov.1.2000
MSDS NO. F-31001
104
Personal Protective Equipment
Respiratory Protection
:Not required under intended use.
Hand Protection
:Not required under intended use.
Eye Protection
:Not required under intended use.
Skin Protection
:Not required under intended use.
Other Protective equipment :Use of a dust mask and goggles are recommended when
handling a large quantity of toner or during long term exposure,
as with any non-toxic dust.
as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State : Solid Form: Powder Color: Black Odor: odorless
Ph
:Not applicable
Boiling/Melting Point
:Not applicable
Flash Point (°C )
:Not applicable
Explosion Properties
:No data
Density (
g/cm
3
)
:5.4 (bulk density : 2.09)
Solubility in water
:Negligible
10. STABILITY AND REACTIVITY
Stability
:Stable
Hazardous Reactions
:Dust explosion, like most finely divided organic powders.
Conditions to avoid
:Electric discharge, throwing into fire.
Materials to avoid
:Oxidizing Materials
Hazardous Decomposition Products
:CO, CO
2
and NO
X
Further Information
:None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion (oral) :LD
50
>2000m
g/kg (Rats) (Estimated from the constituent components)
Dermal
:LD
50
>2000m
g/kg (Rats)
Inhalation
:No data
Eye irritation
:Not an irritant (Rabbits)
Skin irritation
:Not an irritant (Rabbits)
Skin sensitizer
:No sensitization
Mutagenicity
:Negative (Ames Test)
Carcinogenicity
:In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen
(possible human carcinogen). This classification is given to chemicals for
which there is inadequate human evidence, but sufficient animal evidence
on which to base an opinion of carcinogenicity. The classification is based
upon the development of lung tumors in rats receiving chronic inhalation
exposures to free carbon black at levels that induce particle overload of the
lung. Studies performed in animal models other than rats did not show any
association between carbon black and lung tumors. Moreover, a two-year
cancer bioassay using a typical toner preparation containing carbon black
demonstrated no association between toner exposure and tumor
development in rats.
which there is inadequate human evidence, but sufficient animal evidence
on which to base an opinion of carcinogenicity. The classification is based
upon the development of lung tumors in rats receiving chronic inhalation
exposures to free carbon black at levels that induce particle overload of the
lung. Studies performed in animal models other than rats did not show any
association between carbon black and lung tumors. Moreover, a two-year
cancer bioassay using a typical toner preparation containing carbon black
demonstrated no association between toner exposure and tumor
development in rats.
Chronic Effect
:In a study in rats of chronic inhalation exposure to a typical toner, a mild to
moderate degree of lung fibrosis was observed in 92% of the rats in the high
concentration (16m
concentration (16m
g/m
3
) exposure group, and a minimal to mild degree of
fibrosis was noted in 22% of the animals in the middle (4m
g/m
3
) exposure
group, but no pulmonary change was reported in the lowest (1m
g/m
3
)
exposure group, the most relevant level to potential human exposures.
Page: 3/4
MATERIAL SAFETY DATA SHEET
Data Revised: Jul .31, 2002
Data Issued:
Data Issued:
Jun. 1, 1998
MSDS NO. F-30831
105
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATION
Waste from residues
:Waste material may be dumped or incinerated under conditions
which meet all federal, state and local environmental regulations.
Contaminated Packaging
:Waste may be disposed or incinerated under conditions which meet
all federal, state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification
:None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act) :
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance :None
311/312 Hazard Classification
311/312 Hazard Classification
:None
EU Information
1999/45/EC and 67/548/EEC
Symbol & Indication
:Not required
R-Phrase
:Not required
76/769/EEC :All chemical substances in this product comply with all applicable rules or order
under 76/769/EEC.
16. OTHER INFORMATION
NFPA Rating (USA)
:Health=1 Flammability=1 Reactivity=0
WHMIS Legislation (Canada) :This product is not a controlled product.
References
References
IARC (1996) :IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to
Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some
Nitro Compounds, Lyon, pp.149-261
Nitro Compounds, Lyon, pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie,
P.Morrow, U.Mohr,
S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic
Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
P.Morrow, U.Mohr,
S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic
Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
The information on this data sheet represents our current data and best opinion as to the proper
use in handling of this product under normal conditions. However, all materials may present
unknown hazards and should be used with caution. Although certain hazards are described
herein, we do not guarantee that these are the only hazards which exist.
use in handling of this product under normal conditions. However, all materials may present
unknown hazards and should be used with caution. Although certain hazards are described
herein, we do not guarantee that these are the only hazards which exist.
Page: 4/4
106
INDEX
Symbols
[
] key............................... 31, 33, 36
[
] key .................... 10, 23, 28, 29, 31
[
] key .................... 10, 23, 28, 29, 31
2
2 IN 1 copying ............................. 35, 65
[2-SIDED COPY] key ........... 10, 31, 32
[2-SIDED COPY] key ........... 10, 31, 32
A
About supplies and options .............. 91
About the scan head ........................ 17
Appendix .......................................... 92
Audible signals ........................... 66, 70
Auto clear ................................... 16, 64
Auto power shut-off mode .... 17, 64, 73
Automatic two-side copying.............. 30
Automatic two-sided
copying ............................................. 30
About the scan head ........................ 17
Appendix .......................................... 92
Audible signals ........................... 66, 70
Auto clear ................................... 16, 64
Auto power shut-off mode .... 17, 64, 73
Automatic two-side copying.............. 30
Automatic two-sided
copying ............................................. 30
B
Base setting...................................... 70
Basic procedure for printing ............. 60
Before installation ............................. 41
Button Manager .................... 40, 55, 61
Button Manager scan menu ............. 62
Bypass tray............................. 9, 18, 21
Bypass tray paper guides ............. 9, 22
Basic procedure for printing ............. 60
Before installation ............................. 41
Button Manager .................... 40, 55, 61
Button Manager scan menu ............. 62
Bypass tray............................. 9, 18, 21
Bypass tray paper guides ............. 9, 22
C
Cabinet ............................................. 88
Canceling a print job......................... 60
Caution
Canceling a print job......................... 60
Caution
- Handling the machine.................... 4
- label on the machine ..................... 3
- Selecting an installation site .......... 3
- Using the machine......................... 3
- label on the machine ..................... 3
- Selecting an installation site .......... 3
- Using the machine......................... 3
Changing a tray’s paper size
settings ............................................. 23
Charger cleaner............................ 9, 90
Checking packed components and
accessories ...................................... 12
Checking the total count ................... 87
Checking the drum cartridge life....... 87
Cleaning the machine....................... 88
settings ............................................. 23
Charger cleaner............................ 9, 90
Checking packed components and
accessories ...................................... 12
Checking the total count ................... 87
Checking the drum cartridge life....... 87
Cleaning the machine....................... 88
Cleaning the TD cartridge and drum
cartridge ........................................... 89
[CLEAR ALL] key ....................... 11, 16
[CLEAR] key......................... 10, 24, 80
Connecting a USB cable .................. 46
Convenient copy function ................. 30
Conventions used in this manual and
online manual ..................................... 6
cartridge ........................................... 89
[CLEAR ALL] key ....................... 11, 16
[CLEAR] key......................... 10, 24, 80
Connecting a USB cable .................. 46
Convenient copy function ................. 30
Conventions used in this manual and
online manual ..................................... 6
D
Display.............................................. 10
Display messages ............................ 71
Document feeder cover ................ 9, 83
Document feeder tray................... 9, 25
Document glass.... 9, 24, 31, 33, 35, 88
Drum cartridge replacement............. 86
Drum cartridge........................ 9, 86, 89
Drum cartridge handle...................... 86
Display messages ............................ 71
Document feeder cover ................ 9, 83
Document feeder tray................... 9, 25
Document glass.... 9, 24, 31, 33, 35, 88
Drum cartridge replacement............. 86
Drum cartridge........................ 9, 86, 89
Drum cartridge handle...................... 86
E
Envelope .................................... 18, 21
Environmental information.................. 5
Error indicator..... 10, 71, 76, 82, 83, 86
[E-SORT/SP.FUN] key ... 10, 33, 35, 38
Exit area ....................................... 9, 83
[EXPOSURE
Environmental information.................. 5
Error indicator..... 10, 71, 76, 82, 83, 86
[E-SORT/SP.FUN] key ... 10, 33, 35, 38
Exit area ....................................... 9, 83
[EXPOSURE
(
)
] key ............. 10, 28
Exposure value guidelines ............... 28
F
Factory default settings .................... 67
Front cover ......................................... 9
Fusing unit release lever ........ 9, 81, 82
Front cover ......................................... 9
Fusing unit release lever ........ 9, 81, 82
H
Handles ........................................ 9, 13
Hardware and software
requirements .................................... 41
How to place the original .................. 24
How to use the online manual .......... 63
Hardware and software
requirements .................................... 41
How to place the original .................. 24
How to use the online manual .......... 63
107
I
Initial settings.................................... 16
Installation environment and usable
software ............................................ 41
Installing Acrobat Reader ................. 63
Installing the software....................... 42
Installing the TD cartridge ................ 14
Introduction......................................... 6
IP address ........................................ 48
Installation environment and usable
software ............................................ 41
Installing Acrobat Reader ................. 63
Installing the software....................... 42
Installing the TD cartridge ................ 14
Introduction......................................... 6
IP address ........................................ 48
L
Labels ................................... 18, 19, 21
LAN connector.............................. 9, 47
Loading paper .................................. 18
Loading paper in the bypass tray ..... 22
Loading the paper tray ..................... 19
Long edge .................................. 30, 38
LPR (TCP/IP) direct printing ............. 50
LAN connector.............................. 9, 47
Loading paper .................................. 18
Loading paper in the bypass tray ..... 22
Loading the paper tray ..................... 19
Long edge .................................. 30, 38
LPR (TCP/IP) direct printing ............. 50
M
Main features...................................... 7
Maintenance ..................................... 71
Margin shift ................................. 38, 66
Margin width ..................................... 66
Memory full ....................................... 34
[MENU] key ...................................... 10
MFP driver .................................. 40, 77
Misfeed removal
Maintenance ..................................... 71
Margin shift ................................. 38, 66
Margin width ..................................... 66
Memory full ....................................... 34
[MENU] key ...................................... 10
MFP driver .................................. 40, 77
Misfeed removal
- Misfeed in the fusing area ........... 81
- Paper feed area........................... 81
- RSPF........................................... 83
- Transport area............................. 82
- Paper feed area........................... 81
- RSPF........................................... 83
- Transport area............................. 82
Mode indicators ................................ 10
[MODE SELECT] key ........... 10, 60, 61
[MODE SELECT] key ........... 10, 60, 61
N
Normal copying ................................ 24
Numeric keys.............................. 10, 27
Numeric keys.............................. 10, 27
O
Offset function ............................ 34, 65
[OK] key............................................ 10
Online Manual .............................. 6, 63
Operation in copy, printer, and
scanning modes ............................... 62
Operation manual............................... 6
Operation manual (for facsimile) ........ 6
Operation panel............................ 9, 10
Original guides ............................. 9, 25
Original types
[OK] key............................................ 10
Online Manual .............................. 6, 63
Operation in copy, printer, and
scanning modes ............................... 62
Operation manual............................... 6
Operation manual (for facsimile) ........ 6
Operation panel............................ 9, 10
Original guides ............................. 9, 25
Original types
- AUTO (
) ................................ 28
- PHOTO (
) .............................. 28
- TEXT (
) .................................. 28
Originals that cannot be used in
the RSPF.......................................... 26
the RSPF.......................................... 26
P
Paper................................................ 18
Paper output tray ................................ 9
Paper output tray extension ......... 9, 26
Paper size setting............................. 23
Paper tray............................... 9, 18, 19
Paper type ........................................ 18
Plug and play screen does not
appear .............................................. 78
Power cord ................................... 9, 15
Power off .......................................... 17
Power on .......................................... 16
Power save indicator ...... 10, 17, 73, 76
Power save modes........................... 17
Power switch .......................... 9, 16, 17
Preheat mode............................. 17, 64
Preparations ....................................... 9
Preparing the machine for
installation ........................................ 13
Preset ratio ....................................... 29
Pressure plate lock........................... 19
Printer driver..................................... 40
Printer/scanner functions.................. 59
Problems during setup the
software............................................ 77
Protective materials.......................... 13
Paper output tray ................................ 9
Paper output tray extension ......... 9, 26
Paper size setting............................. 23
Paper tray............................... 9, 18, 19
Paper type ........................................ 18
Plug and play screen does not
appear .............................................. 78
Power cord ................................... 9, 15
Power off .......................................... 17
Power on .......................................... 16
Power save indicator ...... 10, 17, 73, 76
Power save modes........................... 17
Power switch .......................... 9, 16, 17
Preheat mode............................. 17, 64
Preparations ....................................... 9
Preparing the machine for
installation ........................................ 13
Preset ratio ....................................... 29
Pressure plate lock........................... 19
Printer driver..................................... 40
Printer/scanner functions.................. 59
Problems during setup the
software............................................ 77
Protective materials.......................... 13
Click on the first or last page to see other AL-1566 (serv.man40) service manuals if exist.