Sharp AL-1566 (serv.man39) User Manual / Operation Manual ▷ View online
11
1
PREPARATIONS
[ZOOM] key
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[ZOOM] key and select the desired
preset ratio. To select a ratio that is not
preset, press the [ZOOM] key, select the
preset ratio that is closest to the desired
ratio, and then press the [
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[ZOOM] key and select the desired
preset ratio. To select a ratio that is not
preset, press the [ZOOM] key, select the
preset ratio that is closest to the desired
ratio, and then press the [
] key (
)
or
[
] key (
) to increase or
decrease the ratio in increments of 1%.
[START] key (
[START] key (
) / Ready indicator
The ready indicator lights up when
copying or scanning is possible.
To begin copying, press the [START]
key (
copying or scanning is possible.
To begin copying, press the [START]
key (
).
The [START] key (
) is also pressed
to return to normal operation from auto
power shut-off mode.
[CLEAR ALL] key (
power shut-off mode.
[CLEAR ALL] key (
)
This returns all functions to the default
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
Shows the current copy ratio.
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
been entered with the numeric keys.
A checkmark "
" appears when the
exposure has been changed, or when
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
15
15
15
16
16
16
17
17
17
18
19
20
21
READY TO COPY.
100% A4 0
100% A4 0
Display
1,2,3,
É
1,2,3,
É
SP. FUNC
ZOOM
OK
12 13 14
15
16 17
18
19
20
21
2
3
4
5
12
CHECKING PACKED COMPONENTS AND
ACCESSORIES
ACCESSORIES
Open the carton and check if the following components and accessories are
included.
If anything is missing or damaged, contact your authorized service representative.
included.
If anything is missing or damaged, contact your authorized service representative.
If the machine does not function properly during setup or use, or if a
function cannot be used, see "TROUBLESHOOTING AND
MAINTENANCE" (p.71).
function cannot be used, see "TROUBLESHOOTING AND
MAINTENANCE" (p.71).
Note
Drum cartridge
(installed in machine)
Software CD-ROM
Telephone line cord
(AL-1566 only)
• Operation manual
• Operation manual
• Operation manual
(For Facsimile)
(AL-1566 only)
(AL-1566 only)
TD cartridge
13
1
PREPARING THE MACHINE FOR INSTALLATION
1
Be sure to hold the handles on both
sides of the machine to unpack the
machine and carry it to the installation
location.
sides of the machine to unpack the
machine and carry it to the installation
location.
2
Remove all pieces of tape shown in the illustration below and
then open the RSPF and remove the protective materials. Take
out the bag containing the TD cartridge.
then open the RSPF and remove the protective materials. Take
out the bag containing the TD cartridge.
3
Release the scan head locking switch.
The scan head locking switch is under the document glass.
If the switch is locked (
If the switch is locked (
)
, the machine will not operate. Unlock the switch
(
) as shown below.
Lock
Unlock
Grasp here and turn in
the direction of the arrow.
the direction of the arrow.
14
INSTALLING THE TD CARTRIDGE
1
Open the bypass tray, and
then open the side cover.
then open the side cover.
2
Press gently on both sides of
the front cover to open the
cover.
the front cover to open the
cover.
3
Remove the TD cartridge from the bag. Remove the protective
paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective
cover and pull the tab to your side to remove the cover.
paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective
cover and pull the tab to your side to remove the cover.
4
While pushing the lock release
button, gently insert the TD
cartridge until it locks into place.
button, gently insert the TD
cartridge until it locks into place.
4 or 5 times
Lock release button
Click on the first or last page to see other AL-1566 (serv.man39) service manuals if exist.