Sharp AL-1566 (serv.man39) User Manual / Operation Manual ▷ View online
23
2
CHANGING A TRAY'S PAPER SIZE SETTING
Follow these steps to change a tray's paper size setting.
1
Press the [MENU] key.
Press the [
Press the [
] key (
) or [
] key (
) until "PAPER SIZE"
appears, and then press the [OK] key.
2
Press the [OK] key to select the tray.
3
Press the [
] key (
) or [
] key (
) to
select the paper size, and then press the
[OK] key.
[OK] key.
The paper size changes as follows each time the
[
[
] key (
) or [
] key (
) is pressed:
"A4"
→"B5"→"A5"→"8,5x14"→"8,5x13"→"8,5x11"
→"5,5x8,5".
4
Squeeze the lock lever of the front guide and slide the front
guide to match the width of the paper, and move the left guide
to the appropriate slot as marked on the tray.
guide to match the width of the paper, and move the left guide
to the appropriate slot as marked on the tray.
• The front guide is a slide-type guide. Grasp the locking knob on the guide
and slide the guide to the indicator line of the paper to be loaded.
• The left guide is an insert-type guide. Remove it and then insert it at the
indicator line of the paper to be loaded.
• The paper size setting cannot be changed when the machine has
stopped temporarily due to running out of paper or a misfeed.
• During printing (even in copy mode), the paper size setting cannot be
changed.
When you have finished configuring the tray's paper size setting,
press the [MENU] key.
press the [MENU] key.
Note
1,2,3,
1,2,3,
SP. FUNC
PAPER SIZE
1:TRAY1
1:TRAY1
1,2,3,
1,2,3,
SP. FUNC
TRAY1
1:A4
1:A4
Note
Left
guide
guide
Front
guide
guide
24
3
Chapter 3
This chapter explains basic copying functions.
NORMAL COPYING
Using the document glass
1
Open the RSPF, and place the original face down on the
document glass.
[How to place the original]
document glass.
[How to place the original]
Align the original with the original scale and the
centering (
centering (
) mark.
2
Gently close the RSPF.
3
Select the number of copies and other copy settings, and then
press the [START] key (
press the [START] key (
).
Copying books or originals with folds or creases
Press down on the RSPF while copying as shown. If
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straight
originals with folds or creases well before placing.
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straight
originals with folds or creases well before placing.
• The document glass can scan up to an A4 original.
• When a copy is made, the edges will not be copied (image loss). For
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.92).
• To stop copying in the middle of a run, press the [CLEAR] key (
).
• For the copy settings, see pages 26 through 39.
Note
mark
Original scale
Note
MAKING COPIES
MAKING COPIES
25
3
Using the RSPF
1
Make sure that an original has not been left on the document
glass.
glass.
2
Adjust the original guides to the size
of the originals.
of the originals.
3
Set the original(s) face up in the
document feeder tray.
document feeder tray.
The RSPF indicator on the operation panel
will light up. If this indicator does not light up,
the originals are not properly set or the RSPF
is not properly closed.
will light up. If this indicator does not light up,
the originals are not properly set or the RSPF
is not properly closed.
4
Select the number of copies and other copy settings, and then
press the [START] key (
press the [START] key (
).
• Originals that are A5 to A4 and 52
g/m
2
to 90
g/m
2
can be used. A
maximum of 30 pages can be placed at once.
• Straighten curled originals before placing them in the document
feeder tray. Curled originals may cause misfeeds.
• Place originals horizontally.
• Before placing originals in the document feeder tray, be sure to
• Before placing originals in the document feeder tray, be sure to
remove any staples or paper clips from them.
• When a copy is made, the edges will not be copied (
image loss
).
For the image loss, see the "SPECIFICATIONS" (p.92).
• When using the margin shift function, check the position of the
margins carefully. (p.38)
• To stop copying in the middle of a run, press the [CLEAR] key (
).
• For the copy settings, see pages 26 through 39.
Note
Original face up
Note
MAKING COPIES
26
Originals that cannot be used in the RSPF
The following originals cannot be used. These may cause misfeeds or smudging and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on
thermal transfer paper.
Stream feeding mode
"SET ORIGINALS FOR STREAM FEEDING" will appear in the display for five
seconds after all originals are fed. If a new original is placed in the RSPF during this
time, the original will be automatically fed in and copying will begin with the same
setting. The stream feeding mode is disabled in "STREAM FEEDING" in the user
programs (p.65).
seconds after all originals are fed. If a new original is placed in the RSPF during this
time, the original will be automatically fed in and copying will begin with the same
setting. The stream feeding mode is disabled in "STREAM FEEDING" in the user
programs (p.65).
Capacity of paper output tray
When copying onto paper larger than A4 size, pull out the paper
output tray extension.
output tray extension.
• The paper output tray can hold a maximum of 250 pages. If more
than 250 pages are allowed to accumulate, a paper jam may occur.
• After removing paper, if you need to return the paper to the paper
output tray, lift up the paper holder arm and place the paper under the
arm.
arm.
Note
Maximum number of pages that can
be held in the tray: 250
be held in the tray: 250
Note
Click on the first or last page to see other AL-1566 (serv.man39) service manuals if exist.