Sharp AL-1566 (serv.man11) Service Manual ▷ View online
AL-1556/1566 DISASSEMBLY AND ASSEMBLY 8 - 17
4) Bend the reverse roller and remove it.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
11. RSPF section (RSPF model only)
A. RSPF
(1) Remove the rear cabinet.
1) Remove four screws.
2) Remove the rear cabinet.
(2) Remove the RSPF.
1) Remove the connector and the cable.
2) Remove the RSPF.
B. Intermediate tray
1) Remove the intermediate tray.
C. Upper cover
1) Remove four screws from the bottom of the main body.
2) Remove the upper cover.
1
4)
1)
3)
2)
1
1
2
1
1
AL-1556/1566 DISASSEMBLY AND ASSEMBLY 8 - 18
D. Pickup unit
1) Remove the belt, the paper feed frame spring, and two harnesses.
2) Remove the pickup unit.
Note: When reassembling, be careful of the hole position for the paper
feed frame spring.
E. Upper cover of the pickup unit.
1) Remove two screws from the bottom of the pickup unit.
2) Remove the upper cover.
F. Sensor PWB
1) Remove two screws.
2) Remove the sensor PWB.
3) Remove the harness.
G. Pickup solenoid
1) Remove two screws.
2) Remove the pickup solenoid.
Note: When reassembling, hang the iron core on the solenoid arm.
1
1
2
1
1
1
2
1
1
1
2
3
1
2
A
AL-1556/1566 DISASSEMBLY AND ASSEMBLY 8 - 19
H. Clutch
(1) Remove the clutch unit.
1) Remove the E-ring.
2) Remove the pulley and the bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
(2) Remove the clutch
1) Remove the E-ring.
2) Remove the parts.
I. Manual paper feed roller, pickup roller
(1) Remove the pickup unit.
1) Lift the paper stopper.
2) Slide the take-up roller unit.
3) Slide the bushing in the arrow direction.
4) Remove the take-up roller.
Note: When reassembling, hang the convex portion of the roller unit
on the solenoid arm.
(2) Remove the Manual paper feed roller, pickup roller.
1) Remove the parts.
2) Remove the manual paper feed roller.
3) Remove the pickup roller.
4) Remove the parts.
1
5
2
4
3
1
2
1
4
2
3
A
1
2
3
1
1
4
AL-1556/1566 DISASSEMBLY AND ASSEMBLY 8 - 20
J. Transport unit removal
1) Disconnect the connector, and cut the binding band.
2) Remove two screws, and remove the document tray unit.
3) Remove five screws, and remove the transport unit.
K. Belt 1
1) Remove the belt.
L. Belt 2
1) Remove three screws.
2) Remove the drive unit.
3) Remove the belt.
Note: When reassembling, hang the belt on the boss.
M. SPF motor
1) Remove the harness.
2) Remove two screws.
3) Remove the SPF motor.
N. Solenoid
1) Remove the harness.
2) Remove two screws.
3) Remove the solenoid.
3
4
5
1
3
5
5
5
6
2
1
1
2
3
1
1
2
3
1
2
3
Click on the first or last page to see other AL-1566 (serv.man11) service manuals if exist.