DOWNLOAD Sharp AL-1530 (serv.man5) Service Manual ↓ Size: 3.21 MB | Pages: 36 in PDF or view online for FREE

1) Loosen the screw.
2) Open the paper exit PG.
3) Remove the paper entry sensor.
4) Remove the harness.

1) Remove the parts.

1) Loosen the screw.
2) Open the paper exit PG.
3) Remove the parts.

1) Remove the paper exit PG.
2) Remove the transport roller.

AL-1530

6  –  7

1) Remove two screws.
2) Remove the parts.

1) Remove two screws.
2) Remove the paper feed PG upper.

1) Remove the parts.
2) Remove the paper exit roller.

1) Remove the ring
2) Remove the reverse gate

NOTE: When reassembling, be careful of the groove and the hole

positions of the spring.

NOTE: When reassembling, hang 2) on the solenoid.

1) Remove the screw.
2) Remove the solenoid.

1

1

2

AL-1530

6  –  8

Main code Sub code

Content

26

4

Main body duplex setting
(Operation/procedure)
1. When this simulation is executed, the currently set duplex code number is displayed.
2. Enter the code number corresponding to the duplex and press the ENTER key, and the setup will be changed.

43

1

Fusing temperature setting
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key, and the setting will be changed.

4

Multi copy fusing temperature setting
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key, and the setting will be changed.

5

Fusing temperature setting in duplex copying
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number corresponding to the duplex and press the START key. The setting is changed accordingly.

∗ The above shift temperature set by this simulation is added to the fusing temperature of single copy.

Code number

Duplex

0

Without Duplex

1

With Duplex

Code number

Set temperature (˚C)

0

175

1

180

2

185

3

190

4

195 (

∗ Default)

5

200

Code number

Set temperature (˚C)

0

155

1

160

2

165

3

170 (

∗ Default)

4

175

5

180

Code number

Shift temperature (˚C)

0

±0˚C

1

–8˚C

2

–6˚C

3

–4˚C

4

–2˚C

5

±0˚C

6

+2˚C

7

+4˚C

8

+6˚C

9

+8˚C

AL-1530

7 – 1

Main code Sub code

Content

51

2

Resist amount adjustment (Outline)

Used to adjust the contact pressure of paper onto the copier resist roller and the RSPF resist roller.
(Operation/Procedure)
1. When this simulation is executed, the currently set value is displayed.
2. In a machine with the multi paper feed unit installed, press the copy mode select key, and each setting mode and

display are changed sequentially.
In a machine with the single paper feed unit installed, press the copy mode select key, and each setting mode
and display are changed sequentially.
∗ The selected adjustment mode is indicated by the lamps as follows:

3. Enter the adjustment value with the 10-key and press the SORT key. Then the set value is stored and a copy is

made.

4. Press the clear key to store the set value and exit the simulation.

∗ Machine with the multi manual paper feed

∗ Machine with the single manual paper feed

Adjustment mode

Display lamp

Main cassette paper feed

AE, Main cassette lamp

2nd cassette paper feed

AE, 2nd cassette lamp

Manual paper feed

AE, Manual paper feed lamp

RSPF document feed (front)

AE, TEXT, PHOTO lamp

RSPF document feed (back)

AE, TEXT lamp

Duplex back

TEXT, PHOTO lamp

Adjustment mode

Display lamp

Main cassette paper feed

AE, Main cassette lamp

Manual paper feed

AE blinking (Main cassette lamp ON)

RSPF document feed (front)

AE, TEXT, PHOTO lamp

RSPF document feed (back)

AE, TEXT lamp

Duplex back

TEXT, PHOTO lamp

AL-1530

7  –  2