Sharp AL-1530 (serv.man5) Service Manual ▷ View online
3. Upper cover
1) Remove four screws from the bottom of the main body.
2) Remove the upper cover.
2) Remove the upper cover.
4. Pickup unit
1) Remove the belt, the paper feed frame spring, and two harnesses.
2) Remove the pickup unit.
2) Remove the pickup unit.
NOTE: When reassembling, be careful of the hole position for the
paper feed frame spring.
5. Upper cover of the pickup unit.
1) Remove two screws from the bottom of the pickup unit.
2) Remove the upper cover.
2) Remove the upper cover.
6. Sensor PWB
1) Remove two screws.
2) Remove the sensor PWB.
3) Remove the harness.
2) Remove the sensor PWB.
3) Remove the harness.
1
2
1
1
1
1
2
1
1
1
2
1
1
1
2
3
AL-1530
6 – 3
7. Pickup solenoid
1) Remove two screws.
2) Remove the pickup solenoid.
2) Remove the pickup solenoid.
NOTE: When reassembling, hang the iron core on the solenoid arm.
8. Clutch
A. Remove the clutch unit.
1) Remove the E-ring.
2) Remove the pulley and the bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
2) Remove the pulley and the bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
B. Remove the clutch
1) Remove the E-ring.
2) Remove the parts.
2) Remove the parts.
9. Manual paper feed roller, pickup roller
A. Remove the pickup unit.
1) Lift the paper stopper.
2) Slide the takeup roller unit.
3) Slide the bush in the arrow direction.
4) Remove the takeup roller.
2) Slide the takeup roller unit.
3) Slide the bush in the arrow direction.
4) Remove the takeup roller.
NOTE: When reassembling, hang the convex portion of the roller unit
on the solenoid arm.
1
2
A
1
5
2
4
3
1
2
1
4
2
3
A
AL-1530
6 – 4
B. Remove the Manual paper feed roller, pickup
roller.
1) Remove the parts.
2) Remove the manual paper feed roller.
3) Remove the pickup roller.
4) Remove the parts.
2) Remove the manual paper feed roller.
3) Remove the pickup roller.
4) Remove the parts.
10. Transport unit removal
1) Remove the harness.
2) Remove two screws.
3) Remove the document tray unit.
4) Remove five screws.
5) Remove the transport unit.
2) Remove two screws.
3) Remove the document tray unit.
4) Remove five screws.
5) Remove the transport unit.
NOTE: When reassembling, be careful of.
11. Belt 1
1) Remove the belt.
12. Belt 2
1) Remove three screws.
2) Remove the drive unit.
3) Remove
2) Remove the drive unit.
3) Remove
NOTE: When reassembling, hang the belt on the boss.
13. SPF motor
1) Remove the harness.
2) Remove two screws.
3) Remove the SPF motor.
2) Remove two screws.
3) Remove the SPF motor.
1
2
3
1
1
4
2
3
4
1
2
4
4
4
5
1
1
2
3
1
1
2
3
AL-1530
6 – 5
14. Solenoid
1) Remove the harness.
2) Remove two screws.
3) Remove the solenoid.
2) Remove two screws.
3) Remove the solenoid.
15. Clutch
1) Cut the band with nippers.
2) Remove the harness.
3) Remove the clutch.
2) Remove the harness.
3) Remove the clutch.
16. PS roller
A. Remove the parts.
1) Remove the two screws.
2) Remove the parts.
2) Remove the parts.
B. Remove the PS roller.
1) Loosen the screw.
2) Open the paper exit PG.
3) Remove the parts.
4) Remove the PS roller.
2) Open the paper exit PG.
3) Remove the parts.
4) Remove the PS roller.
1
2
3
1
1
2
3
1
2
1
2
1
3
3
4
AL-1530
6 – 6
Click on the first or last page to see other AL-1530 (serv.man5) service manuals if exist.