Sharp PN-V602 (serv.man2) Handy Guide ▷ View online
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
1
About the handling of this material / Contents
‐
This document is made to explain the installation
know‐how of large size display for our business partners.
Hence, please handle this material very carefully.
-
This document describes basic notes to install and use the
display for long term reliable service.
Contents
[Warning]
This document is to explain the installation know‐
how to our business partners. Please be careful not
to distribute this document or its contents to other
companies, or divert (use) it towards competitors’
models.
In addition, please be reminded that values and
expressions on this document are subject to change
without notice.
Handling this material
1. Precautions of installation and handling
2. Mechanical installation
‐
Optional interface board
‐
Mounting
‐
Remote Control kit
3. Setting for Remote control
4. Basic Display method
5. Cable routing
‐
For Enlarge mode
‐
For Dot by Dot configuration
‐
For monitor control
6. Calibration
7. Tools for supporting installation
1. Precautions of installation and handling
2. Mechanical installation
‐
Optional interface board
‐
Mounting
‐
Remote Control kit
3. Setting for Remote control
4. Basic Display method
5. Cable routing
‐
For Enlarge mode
‐
For Dot by Dot configuration
‐
For monitor control
6. Calibration
7. Tools for supporting installation
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
2
Display surface
Perspective drawing of the rear
side view
Grip Points
The display surface is made of glass. Please use rear handgrip or handle by the edge of the display while
installing and moving. It is possible to cause damage and malfunction of display.
Please don’t apply physical pressure to the bezel such as bending or pulling on the bezel.
Please don’t apply physical pressure to the bezel such as bending or pulling on the bezel.
Precautions
of installation and handling (1)
Prior to installing the PN‐V601, please refer to following items carefully in order to use PN‐V601 for long term reliable service.
Please use rear handgrip or handle by the edge of the display in
installing and moving. Please don’t handle any other part of the
display. The PN‐V601 is high – density product so that please pay attention not
to let the edge of PV‐V601 support the entire weight
load. Please take extra caution to make sure that weight load each display is supported only by the mounting system and not a
neighboring display when building a multi‐screen wall.
Method of interim storage of the display after taking it out from the box
‐
Interim storage using the temporary stand is recommended.
‐
When you must keep the LCD surface side down without temporary stand, please prepare a protection board
larger than the display, and put a protecting sheet like blanket on it, and confirm enough there are neither debris nor a projection
within the range where the LCD surface side comes in contact directly. Please execute the work
only after the greatest care is taken so that the LCD surface should not hit the edge of the protection board underneath.
Protection board larger
than PN‐V601
than PN‐V601
protecting sheet
like blanket
PN‐V601
‐
Do not set the PN‐V601 on a protection
board smaller than itself to avoid the
contact with corner of the board.
‐
Use a protecting sheet like blanket
‐
Do not apply force from
the above.
Please set the PN‐V601 in the center
of the protection board/protecting sheet
and be careful to avoid the contact
with corners of the board.
Precautions for Installation and moving
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
3
‐
Do not use the information display under following conditions ;
1) Usage beyond its capability, feature/function, accuracy/precision
2) Usage that could develop into injury or life‐threatening situation under product breakdown
3) Usage that could lead to major monetary damage
2) Usage that could develop into injury or life‐threatening situation under product breakdown
3) Usage that could lead to major monetary damage
We will not take any responsibility if the product was used under above conditions.
<Example>
Control of all types of safety related usage of transportation equipment (air plane, train, car, etc.), aerospace
equipment, communication equipment, nuclear control equipment, medical equipment, disaster‐prevention/security
equipment, all types of safety equipment, etc.
equipment, all types of safety equipment, etc.
‐
We will not take any responsibility for any failure, damage, loss, etc. which arise from particular installation
(high‐ceiling mounting etc.) and/or installation by non‐Sharp related parties. Prior to the installation, please
examine the potential problems by the installation location and installation method, and only operate within the
appropriate environment.
appropriate environment.
In case of product failure, regardless of warranty period, removal and installation expenses incurred will be the customer’s
responsibility.
Repairing may take a certain time period. For that reason, arranging of a back‐up is recommended.
Repairing may take a certain time period. For that reason, arranging of a back‐up is recommended.
‐
Installation environment of the information display differs by individual cases. Please make appropriate installation by referring
to this material. If you have any difficulty in making judgment about installation or have any comments/questions about the
contents of this material, please ask SHARP Business Solution factory via your local Sharp sales window.
Please refer the PN‐V601 Installation Guidelines for other precautions.
Overall precaution and handling
Precautions
of installation and handling (2)
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
4
Mechanical installation (Optional Interface board)
Optional Interface board PN‐ZB02
PN‐V601 has following input/output terminals.
■Installation Procedure
Additional terminals such as DVI‐D input/output,
Component, LAN etc.. are available by attaching the
optional expansion board PN‐ZB02.