Sharp PN-V602 (serv.man2) Handy Guide ▷ View online
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
20
Calibration (5)
How to implement calibration
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
21
Installation tools for attachment and moving to the installation location
Tools for supporting installation (1)
Installation handle
Installation eyebolt device
Interlocking pipe
Please take care not to add pressure to
parts other than the ones marked with a
heavy line in the diagram during
installation and maintenance.
parts other than the ones marked with a
heavy line in the diagram during
installation and maintenance.
If pressure is added to other parts, the
display itself may be distorted or damaged.
display itself may be distorted or damaged.
Support PN-V601 by holding both corners.
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
22
Tools for supporting installation (2)
Name (temporary)
Use
Image
Installation handle
(UKOG1005MPZZ)
(UKOG1005MPZZ)
‐
For lifting the PN‐V601 up to a high location
This device is inserted into holes on top of PN‐V601 and
enable lifting the PN‐V601 up to a high location during
installation.
2 pieces of this device are necessary per one PN‐V601.
This installation handle is for improving efficiency of
This installation handle is for improving efficiency of
installation. Please use it if necessary.
Installation eyebolt device
(UKOG1006MPZZ)
(UKOG1006MPZZ)
‐
For a crane to lift the PN‐V601 up to a high location.
This device is inserted into holes on top of PN‐V601 and
enable lifting the PN‐V601 up by crane.
2 pieces of this device are necessary per one PN‐V601.
This installation eyebolt device is for improving the
This installation eyebolt device is for improving the
efficiency of installation. Please use it if necessary.
Interlocking pipe
(UKOG‐1007MPZZ)
(UKOG‐1007MPZZ)
‐For making it easy to install PN‐V601
It can reduce gap between the top‐to‐bottom of the PN‐V601
and interlock each panel from both on the top and bottom of
the PN‐V601 when installing with a stand etc.
This pipe can
prevent PN‐V601 from having excessive weight load from
above and underneath.
Please use this interlocking pipe for improving the accuracy
Please use this interlocking pipe for improving the accuracy
when adjusting the vertical position of displays if necessary. It
is not required for installation.
2 pieces of this pipe are
necessary per one PN‐V601.
We will provide following service parts for installation (they are subject to fees)
* if you need above tools, please contact delivery agent or our sales reps.
CONFIDENTIAL
CONFIDENTIAL
Multi Display Setup Manual <Rev1.0 > September.30, 2010
23
Tools for supporting installation (3)
Name (temporary)
Use
Image
Protection cover for the
corner of display
(UKOG1008MPZZ)
‐‐
Reduce shock while moving and installing
These covers are attached on the two bottom corners
of PN‐V601 to protect PN‐V601 from shock.
It is easy to remove the cover.
‐
2 units of this cover are necessary per one PN‐V601.
Protection spacer (for
landscape)
‐Protection of display
Insert this spacer between the PN‐V601 while
installing the neighboring PN‐V601s.
(thickness: 1 mm)
This tool is used to avoid damage of the bezel
(thickness: 1 mm)
This tool is used to avoid damage of the bezel
at the time of installation and the position adjustment of the display.
‐Please take care that the sheet does not extend out of display side.
Protection spacer (for
Portrait)
‐Protection of display
Insert this spacer between the PN‐V601 while
installing neighboring PN‐V601’s.
(thickness: 0.5 mm)
This tool is used to avoid damage of the bezel
(thickness: 0.5 mm)
This tool is used to avoid damage of the bezel
at the installation and the position adjustment of the display.
‐Please take care that the sheet does not extend out of the display side
We will provide following service parts for installation (they are subject to fees)
Gel Sheet
Thickness: 1.0mm
Thickness: 1.0mm
* if you need above tools, please contact delivery agent or our sales reps.
Gel Sheet
Thickness: 0.5mm
Thickness: 0.5mm
Click on the first or last page to see other PN-V602 (serv.man2) service manuals if exist.