PN-V602 (serv.man3). Training Material — Sharp Monitor Handy Guide

Model
PN-V602 (serv.man3)
Pages
35
Size
1.67 MB
Type
PDF
Document
Handy Guide
Brand
Device
Monitor / Training Material
File
pn-v602-sm3.pdf
Date

View Sharp PN-V602 (serv.man3) Handy Guide online

Video Wall 
Configuration and Calibration 
 
 
Ver 2FF 
Course Objectives: 
 
1.
Upon completion of this course the student will have an understanding 
on how to configure a repaired / new unit into an existing Video Wall. 
2.
Using a PC, RS232 straight cable and Datacolor Spyder3Elite colorimeter, 
the student will be able to calibrate the unit to an existing Video Wall 
white balance standard.
 
Unit Configuration  
 
     After you have repaired 
the unit and reinstalled 
into the video wall, you 
will need to: 
 
Configure the monitor to 
work with the customers 
video wall 
 
Calibrate for white 
balance if applicable. 
 
Unit Configuration  
 
1.
Turn on power using 
remote control.  Remote 
I/R receiver must be 
plugged in to monitor 1 
 
2.
Hold “MODE” button on 
remote control for 5 
seconds until you enter the 
   “REMOTE CONTROL MODE” 
3.
Select “All MONITORS” 
4.
Scroll down and select 
“OK” 
 
 
Page of 35

Download Sharp PN-V602 (serv.man3) Handy Guide

Here you can view online or download Sharp PN-V602 (serv.man3) Handy Guide in pdf. This Handy Guide can help you recover, restore, fix, disassemble and repair Sharp PN-V602 (serv.man3) Monitor. Information contained in Sharp PN-V602 (serv.man3) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).