Sharp PN-V600 (serv.man3) Handy Guide ▷ View online
Unit Configuration
Now that you know the ID number
for the set, go back into the
remote control mode and select
monitor 9 in this case
1.
Hold “MODE” button on remote
control for 5 seconds until you
enter the
“REMOTE CONTROL MODE”
3.
Select “SPECIFIED MONITOR”
4.
Select Monitor “9”
5.
Scroll down and select “OK”
Unit Configuration
Multi Mode
Multi mode, sets the unit to work
at a multiple installation site, such
as a video wall in this instance
Next time you press a remote
function, the target monitor, “9” in
this case will operate.
1.
Press “MENU” on remote control
2.
Select “ENLARGE ON”
Unit Configuration
Advanced Mode
The Advanced menu identifies the
monitors location in the video wall
1.
Scroll down to ADVANCED from
“ENLARGE” using remote control
2.
Select “ADVANCED ON”
Unit Configuration
Advanced Mode
3.
Since this Video Wall is 3X3, the
“ENLARGE H” and “ENLARGE V”
must also be set to 3
Click on the first or last page to see other PN-V600 (serv.man3) service manuals if exist.