Sharp PN-V600 (serv.man3) Handy Guide ▷ View online
Unit Configuration
Advanced Mode
Your last step in the configuration
is the Bezel adjustment. This
setting adjusts the monitor for the
outer perimeter of the wall
1.
Select “BEZEL ADJUSTMENT” and
turn it on
Unit Configuration
Advanced Mode
2.
Select “Top, Bottom Right and left.
3.
Unit configuration complete
Unit Calibration
Please refer to the Multi Display Calibration
Tool Operation Manual for more instructions
if required.
After the unit has been configured into the
Video Wall, the PN may require color
calibration. This should only need to be done
if the Video Wall was previously calibrated.
You will need the following equipment in
order to complete the calibration:
Personal PC running XP SP3 or later, Vista
SP1 or later, Windows 7
100MB or more free space RS-232C port
Datacolor Spyder3PRO/Elite
Multi Display Calibration Tool Operation
Manual
Unit Calibration
Equipment Hook-Up
RS 232 is the
most widely used
and easiest to set
up
Attach the RS-
232 cable to the
Video Wall and PC
Click on the first or last page to see other PN-V600 (serv.man3) service manuals if exist.