Sharp PN-L702B (serv.man7) Service Manual ▷ View online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-L702B INSTALLATION, ADJUSTMENT, SETTING
2 – 26
3 - 3. TOUCH PANEL SETTINGS
Touch panel settings are configured in the touch panel driver.
The touch panel driver starts automatically and the icon (
) appears on the taskbar.
■ HOW TO CONFIGURE SETTINGS
1 ) Click the touch panel driver icon (
) on the taskbar.
2 ) Click a menu to change a setting.
■ CALIBRATION
Calibration is used to perform position alignment so that the mouse cur-
sor moves to the correct position when the screen is touched.
<CALIBRATION METHOD>
SIMPLE
Select the currently displayed screen size (“WIDE”, “NORMAL”, “Dot by
Dot”), and calibration takes place automatically. When “ZOOM1” or
“ZOOM2” is used for the view, calibrate using advanced calibration. In
addition, calibrate using advanced calibration if the mouse cursor is out
addition, calibrate using advanced calibration if the mouse cursor is out
of position when the touch pen is used.
MEMO
n
When a key has been assigned the “Easy Change” hot key set-
ting, the key can be pressed to successively change a setting.
ADVANCED
Calibration can be performed manually. Click “OK” to open the settings.
Follow the on-screen instructions. (To cancel during calibration, press
the [ESC] key on the keyboard.)
<HOT KEY SETTING>
Hot keys can be set to perform the operations below. The [Ctrl] and
[Shift] keys are fixed as hot keys. One of the A to Z or 0 to 9 keys can be
[Shift] keys are fixed as hot keys. One of the A to Z or 0 to 9 keys can be
selected for the third hot key.
n
Easy Change : The calibration method can be changed to “Simple” by
pressing the hot key. Settings can be successively
changed by pressing the hot key.
changed by pressing the hot key.
n
Calibration : The hot key can be pressed to open the SELECT CALI-
BRATION screen.
Item
Content
Current Screen
Resolution
The current screen resolution appears.
Calibration
3Refer to page 2 - 26 "■ CALIBRATION".
Properties
3Refer to page 2 - 27 "■ PROPERTIES".
Hardware
Information
Select this to specify “Test Information Dis-
play”, “Rotate Mode”, and “Disable TP
Driver”. (Normally not used.)
Driver”. (Normally not used.)
Test Information
Display
Display
Select to view operating conditions.
(For service technicians.)
(For service technicians.)
Rotate Mode
Select when the image has been rotated on
a PC that has a video card capable of
a PC that has a video card capable of
image rotation.
Disable TP Driver
Select to disable the touch panel function.
Version Information
Shows the version of the touch panel driver.
Exit
Exit the touch panel driver.
(When this is selected, it will no longer be
possible to use the touch panel function.)
possible to use the touch panel function.)
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-L702B INSTALLATION, ADJUSTMENT, SETTING
2 – 27
■ PROPERTIES
Settings for the touch pen can be configured in the properties. Select a
tab to change a setting on that tab.
MEMO
n
Changing this setting also change the effective double-click
range and double-click speed when the mouse is used.
■ OPERATION SETTING
<FUNCTION BUTTON 1>
Set the function that activates when function button 1 is pressed with
the touch pen.
n
RightClick: Functions as a right click.
n
Disable: Disables function button 1.
<FUNCTION BUTTON 2>
Set the function that activates when function button 2 is pressed with
the touch pen.
the touch pen.
n
Pen Software Link: Functions as a link button for a Pen Software function.
n
Disable: Disables function button 2.
MEMO
n
The Pen Software function that links to function button 2 is set in
the Pen Software.
<INPUT MODE SETTING>
Set the input mode for the touch panel. It is normally recommended that
you use “Standard”.
n
Standard: Automatically switches between pen mode and handwrit-
ing mode.
n
Handwriting: Select this when you only wish to use your finger and
will not be using the touch pen function.
n
Pen: Select this for operation by touch pen only. Only the touch pen
can be used; your finger cannot be used.
<TOUCH MODE SETTING>
Select the touch mode (Single touch mode or Dual touch mode).
For information on the touch modes, see the monitor operation manual.
For information on the touch modes, see the monitor operation manual.
n
Single: Use Single touch mode.
n
Dual: Use Dual touch mode. (Windows 7 only)
MEMO
n
When the input mode is “Pen”, “Dual” cannot be selected.
<DETECT ERASER AREA>
Specify whether the area (rectangle) of a touched item is detected. The
application must support area detection.
<RESOLUTION CHANGE NOTICE>
n
Enable: When the screen resolution is changed, a message is dis-
played regarding the calibration setting.
n
Disable: When the screen resolution is changed, the previously set
calibration values are automatically applied. When a resolu-
tion is used for the first time, the message regarding the cal-
ibration setting will appear.
<OPTIMIZE HTML>
For normal operation and writing text by hand, this setting is not neces-
sary.
sary.
When manipulating a document with a small click range for HTML links,
enable this and adjust the effective “Click range”.
Item
Content
DOUBLE CLICK
RANGE SETTING
Set how much the position can shift
between the first touch and the second
touch and still be recognized as a double-
click. Set the range based on how you use
click. Set the range based on how you use
the touch pen. To return the setting to the
default setting, click “Default”.
DOUBLE CLICK
SPEED SETTING
Set the time that is recognized as a double-
click. When a second touch occurs within
the set time after the first touch, it is recog-
nized as a double-click.
nized as a double-click.
SPEED
SETTING (Auto)
SETTING (Auto)
The inside of the frame can be touched
twice (double-clicked) to set the speed auto-
twice (double-clicked) to set the speed auto-
matically based on the interval between the
touches.
Set Manually
The speed can be set manually from “Slow”
(about 1 second) to “Fast” (about 0.3 sec-
onds).
onds).
TEST
When the inside of the frame is double-
clicked by touching it twice, the screen
clicked by touching it twice, the screen
changes. If the screen does not change,
repeat the setting.
Default
Click to restore the default setting.
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-L702B INSTALLATION, ADJUSTMENT, SETTING
2 – 28
3 - 4. UNINSTALLING THE DRIVER SOFTWARE
CAUTION
n
This can only be done by a user with administrator authority.
1 ) Click the touch panel driver icon (
) on the taskbar and click “Exit”.
If a confirmation window appears, click “Yes”.
2 ) Disconnect the USB cable.
3 ) Select “Control Panel” from the “Start” menu.
4 ) Click “Uninstall a program”.
n
If you are using icon view (Classic View), double-click “Programs and Features”.
n
In Windows XP, click “Add or Remove Programs”.
(In the “Classic View”, double-click “Add or Remove Programs”.)
(In the “Classic View”, double-click “Add or Remove Programs”.)
5 ) Remove “Touch Panel Driver”.
Follow the on-screen instructions.
6 ) If a screen appears prompting you to restart your PC, restart your PC.
This completes the uninstallation.
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-L702B INSTALLATION, ADJUSTMENT, SETTING
2 – 29
4. SETTING
4 - 1. SCHEDULE
You can set the time to switch the monitor on and off.
Set this function with “SCHEDULE” in the OPTION menu.
1 ) Press
or
to select the SCHEDULE number, and press
.
2 ) Set the SCHEDULE. (See the description below.)
Press
or
to select items, and press
or
to change
the setting.
3 ) Press
.
SCHEDULE becomes effective.
CAUTION
n
Do not switch off the main power after setting the SCHEDULE.
n
Specify the correct date and time.
SCHEDULE does not function unless the date and time are spec-
ified.
n
Check regularly that the set date and time are correct.
n
When “STANDBY MODE” is “LOW POWER”, SCHEDULE can-
not be set.
not be set.
MEMO
n
Up to 8 SCHEDULE items can be registered.
n
Setting the SCHEDULE flashes the power LED alternately in red
and orange in standby mode.
n
A SCHEDULE that has a large number has precedence over that
of a small number when schedules overlap.
4 - 2. ADVANCED ITEMS (AV INPUT)
MEMO
n
When “FLESH TONE” is set to “LOW” or “HIGH”, “C.M.S.-HUE/-
SATURATION/-VALUE” cannot be set.
No.
Q
SCHEDULE effective
-
SCHEDULE not effective
POWER
ON
Switches the monitor on at the specified time.
OFF
Switches the monitor off at the specified time
and puts the monitor in standby mode.
DAY OF
THE
WEEK
Specifies the day of the week to execute the SCHEDULE.
ONLY
ONCE
Executes the SCHEDULE once on the spec-
ified day.
ified day.
Specify the day of the week to execute the
SCHEDULE.
EVERY
WEEK
Executes the SCHEDULE on the specified
day of the week every week. Specify the day
of the week to execute the SCHEDULE.
of the week to execute the SCHEDULE.
Periodic setting such as “Monday through
Friday” is also possible.
EVERY
DAY
Executes the SCHEDULE every day regard-
less of the day of the week.
TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.
INPUT
Specifies the input mode at power-on. When not speci-
fying, the screen at the previous power-off appears.
n
Input modes displayed on “DVI” depend on “DVI
SELECT” settings.
SELECT” settings.
n
Input modes displayed on “HDMI” depend on “HDMI
SELECT” settings.
n
Input modes displayed on “BNC” depend on “BNC
SELECT” settings.
SCHEDULE
No. POWER DAY
OF
THE
WEEK TIME INPUT
XXXX/XX/XX XXX XX:XX:XX
OK…[MENU]
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 66.3 kHz
PC D-SUB
MENU
ITEM
CONTENT
FLESH TONE
Adjust the hue control.
3D-NR
Reduce the noise of playback images on video.
Setting a higher level reduces more noise.
However, it may cause blurring on an image.
Setting a higher level reduces more noise.
However, it may cause blurring on an image.
MPEG-NR
Reduce block noise caused by digital compres-
sion.
sion.
3D-Y/C
(AV AUDIO)
(AV AUDIO)
Specify whether to perform 3-dimension Y/C
separation.
separation.
If dot interference or cross-color is occurring in
fa s t- mo t i o n s c e n e s, s e l e c ti n g “ O F F ” m ay
improve the image quality.
fa s t- mo t i o n s c e n e s, s e l e c ti n g “ O F F ” m ay
improve the image quality.
C.M.S.-HUE
Adjusts color tone with 6 colors of R (red),
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
C.M.S.-SATU-
RATION
RATION
Adjusts color vividness with 6 colors of R (red),
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
C.M.S.-VALUE
Adjusts color brightness with 6 colors of R (red),
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
Y (yellow), G (green), C (cyan), B (blue), and
M (magenta).
Click on the first or last page to see other PN-L702B (serv.man7) service manuals if exist.