Sharp PN-K322BH (serv.man6) User Manual / Operation Manual ▷ View online
33
E
Specifications
n
Dimensional Drawings
Note that the values shown are approximate values.
• Monitor screen angle 90° (from horizontal)
19-27/64 [493]
Opening height (15-9/16 [395])
Opening width (27-9/16 [700])
15-23/64 [390]
1-27/64
[36]
17-3/8 [441]
29-17/32 [750]
10-33/64 [267]
3-15/16
[100]
3-15/16
[100]
Unit: inch [mm]
3-15/16 [100]
3-15/16 [100]
• Monitor screen angle 25° (from horizontal)
22-41/64 [575]
8-5/32 [207]
Unit: inch [mm]
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 5/16 inch (8 mm). Loose mounting may cause the product to fall, resulting in
serious personal injuries as well as damage to the product. The screw and hole should come together with over 1/4 inch
(6 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times
or more the weight of the monitor.
34
E
n
Compatible signal timing (PC)
VESA
Wide
US TEXT
640×480
800×600
848×480
1024×768
1152×864
1280×768
1280×800
1280×960
1280×960
1280×1024
1360×768
1400×1050
1600×1200
1680×1050
1920×1200
3840×2160
1600×1200
1680×1050
1920×1200
3840×2160
1280×720
1920×1080
720×400
Screen resolution
DisplayPort
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*1*2
Yes
*1*2
Yes
Yes
Yes
Yes
Yes
*1 Displays using multi-streaming.
*2 The signals for the left and right screens are both 1920 x 2160 signals.
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
24Hz
25Hz
30Hz
50Hz
60Hz
60Hz
60Hz
70Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
24Hz
25Hz
30Hz
50Hz
60Hz
60Hz
60Hz
70Hz
Vsync
* All are compliant only with non-interlaced.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
n
Power management
This monitor conforms to VESA DisplayPort power management.
n
DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
Specifications
35
E
n
DisplayPort input terminal pins
(DisplayPort 20 pin)
No.
Function
No.
Function
1 MainLane 3-
11 Gnd
2 Gnd
12 MainLane 0+
3 MainLane 3+
13 Gnd
4 MainLane 2-
14 Gnd
5 Gnd
15 Aux+
6 MainLane 2+
16 Gnd
7 MainLane 1-
17 Aux-
8 Gnd
18 Hot-plug detection
9 MainLane 1+
19 Gnd
10 MainLane 0-
20 3.3V
Specifications
36
E
• When installing, removing or moving the monitor, ensure
that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or
designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall
or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before
starting installation.
This monitor and bracket must be installed on a wall which
can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material
and the structure.
• To attach a VESA-compliant mounting bracket, use M6
screws that are 1/4 inch (6 mm) to 5/16 inch (8 mm) longer
than the thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit
bottom and the side of unit. Do not hold the LCD panel or
corners. This may cause product damage, failure, or injury.
• Do not use any screw holes other than VESA holes for
installation.
Mounting Precautions
(For SHARP dealers and service engineers)
n
Removing the stand
Caution
• The stand is only for use with the monitor (landscape
orientation only).
Do not use with any other devices, or with the monitor in
the portrait orientation.
• The stand is heavy. Take care not to let it fall.
1. Spread a thick, soft cloth (blanket, etc.) that will prevent
damage to the LCD panel on a stable flat surface where
the entire monitor can be placed, and place the monitor
with the LCD panel face down on the cloth.
2. Remove the screws(x4) that fasten the stand, and
remove the stand.
n
Toppling prevention
Caution
• To reduce the risk of injury and damage caused by the
product toppling or falling in an earthquake or similar
situation, take measures to prevent toppling and falling.
• If the wall or platform on which the monitor is installed is
not sufficiently strong, the effectiveness of the toppling/
falling prevention measures will be severely compromised.
Reinforce the wall or platform as needed.
The toppling/falling prevention measures are intended to
reduce the risk of injury and damage in an earthquake,
however, the effectiveness of the measures is not
guaranteed in all earthquakes.
• Before implementing the toppling prevention measures,
complete all connections.
Secure to wall or post
1. Attach a commercially available eye bolt (a bolt shaped to
1. Attach a commercially available eye bolt (a bolt shaped to
allow attachment of a string or cord) to the wall or post.
Verify that the eye bolt is attached firmly and does not come out.
Commercially available
eye bolt
(bolt shaped to allow
attachment of a string
or cord)
• Top of monitor
2. Attach the supplied anti-toppling clamps (x2) to the stand
pedestal with the screws (M4 x 10) (x2).
• Back of monitor
3. Run a commercially available cord of sufficient strength
through the anti-toppling clamps and the eye of an eye
bolt attached to the wall or a post to secure the monitor.
• Top of monitor
Commercially
available cord
• Back of monitor
Click on the first or last page to see other PN-K322BH (serv.man6) service manuals if exist.