Sharp PN-K321 (serv.man3) Service Manual ▷ View online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-K321/K322B DISASSEMBLY AND ASSEMBLY 6 – 2
2. REAR COVER
1 ) Remove eleven screws (M3 x 6 Cupscrew).
CAUTION
SCREW TIGHTENING TORQUE
・
0.4 - 0.6N•m
2 ) Open tewlve pawls at the joint parts of tthe front cover and remove the rear cover.
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-K321/K322B DISASSEMBLY AND ASSEMBLY 6 – 3
3. MAIN IF PWB
1 ) Refer to [2. REAR COVER] and remve the rear cover.
2 ) Remove the four screws (M3 x 6 3W) and remove the Main IF shield .
CAUTION
SCREW TIGHTENING TORQUE
・
0.4 - 0.6N•m
3 ) Disconnect seven connectors, two screws (M3 x 6 3W), and remove the Main IF PWB.
CAUTION
SCREW TIGHTENING TORQUE
・
0.4 - 0.6N•m
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-K321/K322B DISASSEMBLY AND ASSEMBLY 6 – 4
4. DC-DC PWB
1 ) Refer to [2. REAR COVER] and remve the rear cover.
2 ) Disconnect four connectors, remove four screws (M3 x 6 3W), and remove DC-DC PWB.
CAUTION
SCREW TIGHTENING TORQUE
・
0.4 - 0.6N•m
5. LED DRIVE PWB
1 ) Refer to [2. REAR COVER] and remve the rear cover.
2 ) Disconnect three connectors, remove four screws (M3 x 6 3W), and remove the LED Drive PWB
CAUTION
SCREW TIGHTENING TORQUE
・
0.4 - 0.6N•m
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-K321/K322B DISASSEMBLY AND ASSEMBLY 6 – 5
6. KEY PWB
1 ) Refer to [2. REAR COVER] and remove the rear cover.
2 ) Disconnect one connector and remove the KEY PWB.
7. LED INDICATOR PWB
1 ) Refer to [2. REAR COVER] and remove the rear cover.
2 ) Disconnect one connector, open two pawls, and remove the LED INDICATOR PWB.
3
: ’13.Dec
Click on the first or last page to see other PN-K321 (serv.man3) service manuals if exist.