DOWNLOAD Sharp PN-E602 (serv.man3) Service Manual ↓ Size: 10.55 MB | Pages: 127 in PDF or view online for FREE

PN-E702/E602　DISASSEMBLY AND ASSEMBLY

 6 – 15

1 ) Disconnect four connectors, remove one screw A (M4 x 6, Silver), and remove the AC switch. Remove two screws B (M3 x 6 countersunk,

Black), and remove the AC inlet cable. 

n

Screw A: 0.9 - 1.1N•m

n

Screw B: 0.7 - 0.9N•m

A

Screw

x 1

Black

White

White

Blue

Confirm that the circle 
(o) is on the left side 
and it is in the OFF 

Screw x 2

AC Inlet Cable

AC Switch

Mark

When attaching, ensure that the 
terminals are oriented as 
indicated in the engraved mark.

PN-E702/E602　DISASSEMBLY AND ASSEMBLY

 6 – 16

1 ) Remove four screws A (M3 x 6, Silver), remove four screws B ((M3 x 10B, Silver), and remove the speaker cover.

n

Be careful not to pinch the speaker cable.

n

Screw A: 0.7 - 0.9N•m

n

Screw B: 0.55 - 0.65N•m

2 ) Remove two Faston terminals and two screws (M3 x 6 SW+W, Silver), remove two plain washers, and remove the speakers L/R. 

n

The speakers L/R have an engraved mark for identification. Do not install it in the opposite direction.

n

Insert the Faston terminals securely to the bottom to fix firmly.

n

0.7 - 0.9N•m

Band

A

Screw

x 4

B

Screw

x 4

Speaker
cover

Speaker cable

When assembling, put the binding band of the 
speaker cable inside the cover. 
Slightly pull the speaker cable until it is 
stopped by the binding band inside the cover. 

L-ch

R-ch

Speaker L

Speaker R

Screw x 2
Washer x 2

Screw x 2
Washer x 2

Mark

Mark

Faston terminal

Red

Black

Pull it out while 
holding down the 
part below.

PN-E702/E602　DISASSEMBLY AND ASSEMBLY

 6 – 17

■ PN-E702

1 ) Remove sixteen screw masking sheets A and six screw masking sheets B. Remove fourteen screws (M3 x 8, countersunk, Black), and remove

two front bezel LR covers, the front bezel BTM cover, and the front bezel TOP cover in this sequence.

n

0.7 - 0.9N•m

When assembling,  
insert the rib  
into the hole.

When assembling,  
insert the boss 
into the hole.

Screw x 14

x 16

Masking sheet A

x 6

Masking sheet B

(x 4)

(x 13)

Front bezel cover TOP

Front bezel cover BTM

Front bezel cover LR

Front bezel cover LR

Rib

PN-E702/E602　DISASSEMBLY AND ASSEMBLY

 6 – 18

■ PN-E602

1 ) Remove twenty two screws masking sheets. Remove twelve screws A (M3 x 8, countersunk, Black), and Remove six screws B (M3 x 12, coun-

tersunk, Black), and remove two front bezel LR covers, the front bezel BTM cover, and the front bezel TOP cover in this sequence.

n

Screw A, B: 0.7 - 0.9N•m

Front
 bezel 
cover LR

Front
 bezel 
cover LR

When assembling, 
insert the rib
into the hole.(x 13)

Rib

Front bezel cover TOP

Masking sheet x 22

Front bezel cover BTM

x 6

Screw B

Front bezel 
Angle

Rib

Boss

A

Screw

x 14

When assembling, 
insert the boss into the 
hole and the front bezel 
into the rib. (4 positions each)