DOWNLOAD Sharp PN-A601 (serv.man3) Service Manual ↓ Size: 17.38 MB | Pages: 127 in PDF or view online for FREE

PN-A601　OUTLINE OF THE PRODUCT

 1 – 13

n

You can align several monitors and integrate them into a single large screen to display.

n

Up to five monitors can be aligned in both the longest and shortest directions.

n

Each monitor displays enlarged views of separated images.

Set using the MULTI menu.

1 ) Set “ENLARGE” to “ON”.

2 ) Select “ADVANCED (ENLARGE)”.

3 ) Set the number of monitors aligned in the horizontal direction in “ENLARGE H”.

4 ) Set the number of monitors aligned in the vertical direction in “ENLARGE V”.

5 ) Set the section of the separated image to be displayed on each monitor in “ENLARGE-POS”.

1 Press 

 .

2 Press 

, 

, 

 or 

 to select position, then press 

.

n

When Enlarge is used, the SCREEN MOTION function is disabled.

n

When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

n

When Enlarge is used, the HDMI AUTO VIEW function is disabled.

Horizontal direction: 2 monitors
Vertical direction: 2 monitors

Horizontal direction: 3 monitors
Vertical direction: 2 monitors

MENU

PN-A601　OUTLINE OF THE PRODUCT

 1 – 14

■ SUPPLIED ACCESSORIES

n

Expansion Board: 1

n

Terminal label: 1

n

Mounting screws: 1

n

Operation manual: 1

n

Speaker cable core: 2

n

Installation Manual (instructions for SHARP dealers and service engineers): 1

■ INSTALLATION PROCEDURE

n

Do not touch the connectors of this product and LCD MONITOR. The static electricity in your body may cause breakdown.

n

Touch a grounded source to discharge the static electricity in your body before starting operation.

n

The illustrations in this manual are for explanatory purposes and may not exactly represent the actual product.

1 ) Set the main power switch of the monitor to “off” and disconnect

the power from the wall outlet.

2 ) Spread a thick and soft cloth (such as a blanket) on a level surface,

such as a table, and place the monitor on it with its LCD panel fac-

ing downward.

3 ) Remove the expansion terminal cover A. 

Remove 8 screws.

4 ) Remove the expansion terminal cover B. 

Remove 4 screws.

5 ) Remove the dummy plate. 

Remove 4 screws.

Give the dummy plate to the customer and ask them to store it.

Always install the dummy plate after removing the expansion

board.

6 ) Attach the expansion terminal cover B on the expansion board.

Secure the cover with the 4 screws removed in Step 5.

Apply the screw in order from (1) to (4).

Expansion terminal cover A

Expansion 
terminal cover B

Expansion 
terminal cover B

Expansion 
terminal cover B

Dummy plate

(3)

(4)

(1)

(2)

Expansion 
terminal cover B

PN-A601　OUTLINE OF THE PRODUCT

 1 – 15

7 ) Attach the expansion board. 

Fully insert the connector.

8 ) Secure the expansion board. 

Secure the board with the 2 screws removed in Step 4).

9 ) Attach the attach the expansion terminal cover A. 

Secure the cover with the 8 screws removed in Step 3).

10 )Affix the terminal label in the area indicated by (A) in the above

illustration.

■ INSTALLING PROCEDURES

n

In this machine, a dust-proof tape is attached to the nine installation holes of the glass fixing angle for attaching the protection glass (PN-

ZH601) which is recommended as an option. When attaching the protection glass, do not remove the dust-proof tape but insert the insertion
section of the glass fixing angle into the holes to break the tape, and fix the glass fixing angle without removing the tape.

Insert the tip 
into the hole.

Connector

Connector

(A)

Insertion section of 
the glass fixing angle

LCD front

Insert the angle to fit with 
the double holes in the 
module side.

Break the dust-proof tape, 
and fix the screw.

PN-A601　INSTALLATION, ADJUSTMENT, SETTING

 2 – 1

n

This product is for use indoors.

n

Since the monitor is heavy, consult your dealer before installing,

removing or moving the monitor.

n

A mounting bracket compliant with VESA specifications is required.
Do not use any screw holes other than VESA holes for installation.

n

Use the monitor perpendicular to a level surface. If necessary,

the monitor may be tilted up to 20 degrees upward or downward.

n

When mounting the monitor horizontally, the optional fan cover

(PN-ZR31) is required. For details along with the horizontal
mounting conditions, consult your dealer.

n

Mounting the monitor on the wall requires special expertise and
the work must be performed by an authorized SHARP dealer.

You should never attempt to perform any of this work yourself.

Our company will bear no responsibility for accidents or injuries
caused by improper mounting or mishandling.

n

This monitor should be used at an ambient temperature between

32°F (0°C) and 104°F (40°C). Provide enough space around the

monitor to prevent heat from accumulating inside.

n

Be careful of high temperatures in the surrounding area. 

When installing the monitor inside a housing, or if the ambient

temperature may be outside of the range of 32°F (0°C) to 104°F
(40°C), install a fan or take other measures to keep the ambient

temperature within the required range.

n

Temperature condition may change when using the monitor

together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified

by the optional equipments.

n

Adhere to the following when installing the monitor in its portrait

orientation. Failing to adhere to the following may cause malfunc-
tions.

--- Install the monitor such that the power LED is located on the

downside.

--- Set the “MONITOR” on the SETUP menu to “PORTRAIT”. 

--- Be sure to secure the power cord (supplied) to the cable clamp

attachment with the supplied cable clamp. Make sure that the
power cord (supplied) does not supply power to the terminal

when being secured and do not over bend the power cord

(supplied).

n

Do not block any ventilation openings. If the temperature inside

the monitor rises, this could lead to a malfunction.

n

After mounting, please carefully ensure the monitor is secure,

and not able to come loose from the wall or mount.

n

Do not place the monitor on a device which generates heat.

n

Use the supplied vertical sticker when you install the monitor in
portrait orientation.

--- Do not remove the factory-affixed sticker but affix the logo

sticker over it. Be careful not to cover the remote control sen-
sor or buttons.

7-7/8 [20]

2 [5]

2

[5]

2

[5]

2 [5]

7-7/8
[20]

2

[5]

2

[5]

1-3/8 
[3.5]

1-3/4 
[4.5]

Unit: inch [cm]

Cable clamp
attachment

Power cord (Supplied)

Cable clamp

Operation panel

Logo