Sharp PN-70TB3 (serv.man4) Service Manual ▷ View online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 55
25-5. REGISTER TOUCH PEN
When the channel is changed, all registered touch pens are deregistered. The touch pen registration must be done. (paring) from the
[Touch Pen Settings] of [Touch Pen] in the launcher.
Regarding the registration of the touch pen, refer to the operation manual for the LCD monitor.
25-6. CONFIRM OPERATION
Disconnect the touch pen adaptor from the PC and connect the touch pen adaptorto the monitor.
Start up the SHARP Pen spftware and confirm the operation.
-> When the communication state is poor, perform the [25-3. CONNECTING THE TOUCH PEN ADAPTOR] and [25-4. CHANGE THE
COMMUNICATION CHANNEL OF THE TOUCH PEN ADAPTOR] again.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 56
26. CHANGE TOUCH PEN COMMUNICATION CHANNEL(INTERNAL CONTROLLER)
26-1. START UP INTERNAL CONTROLLER (SERIVCE MODE)
1) Start up the internal controller in the Service mode.
2) After install the Touch Pen Utility, the Touch Pen Utility is started up in the user mode. Then, exit the Touch Pen Utility.
Click the icon of the Touch Pen Utility on the task bar and select the [Exit].
3) Not to start up the Touch Pen Utility in the user mode, delete the Touch pen setting utility from the all programs of the start up menu.
26-2. CREATE SHORT CUT
To start up the Touch Pen Utility in the Service Mode, create the short-cut icon for the start up.
1) From the start up menu, click the SHARP Touch pen in the all programs. Then, right-click the Touch pen setting utility and select the
[Copy].
2) Right-click on the desktop and select the [Paste]. Then, the short-cut icon is created on the desktop.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 57
3) Right-click the created short-cut icon and select the [Property].
4) On the [Short-cut] tab, add “-service” to the path of the [Link].
5) Click the [OK] and close the window.
There is the space before the hyphen.
(Path of the installed Touch pen utility)
“c;\Program Files\SHARP\SHARP Touch Pen\setting.exe”
“c;\Program Files\SHARP\SHARP Touch Pen\setting.exe”
-service
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 58
26-3. CHANGE THE COMMUNICATION CHANNEL OF THE TOUCH PEN ADAPTOR
1) Double-click the short-cut icon created in procedure 25-3.
Click the icon of the Touch Pen Utility on the task bar and select the Touch pen settings. Then, select the Pen adaptor settings.
2) The following Pen adaptor settings window is displayed. From the Channel settongs, select the channel to be set and click the [Apply
settings].
-> Referto the [Channel settings].
The confirmation message is displayed. Click the [OK].
Then, click the [Close].
Click on the first or last page to see other PN-70TB3 (serv.man4) service manuals if exist.