Sharp PN-70TB3 (serv.man4) Service Manual ▷ View online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 47
23. MAIL DESCRIPTION CONTENT
This machine is provided with the functions which send the following mails;
- Periodic send mails which notify the display status periodically on the specified day of week and the specified time
- Abnormality notification mail which notifies an abnormality when there is any abnormality in the display
The contents described in the above mails are explained here.
23-1. ACTUAL MAIL CONTENTS
The format of the mail text is as shown below, which is common to the periodic send mails and the abnormality notification mails.
The contents are in English only.
1
Subject
・
Regular mail LCD Monitor Report
・
Error report mail LCD Monitor Error Report
2
Monitor Name
Setting monitor name : The same name of the [Model] as the factory default .
3
Model
Model name as the factory default
4
Serial No.
Serial number
5
MAC Address
MAC address(EUI48 ID code)as the factory default
6
IP Address
IP address for connecting the network
7
Power Power
state
When the Power is ON, ON is described. When the power is OFF, OFF is described.
8
Input Input
mode
Described contents are the following twelve kinds of contents.
・
DisplayPort
・
HDMI1[PC]
・
HDMI2[PC]
・
HDMI3[PC]
・
HDMI1[AV]
・
HDMI2[AV]
・
HDMI3[AV]
・
D-SUB1 [RGB]
・
D-SUB1 [COMPONENT]
・
D-SUB1 [VIDEO]
・
D-SUB2
・
WHITE BOARD
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 48
9 Size
Screen
size
Described contents are the following six kinds of contents.
・
Wide
・
Zoom1
・
Zoom2
・
Normal
・
DotbyDot
10
Color Mode
Color mode
Described contents are the following four kinds of contents.
・
Standard
・
Vivid
・
sRGB
・
High Illuminance
11 Bright
Brightness
Setting value from 0 to 31 is described.
12 Volume
Volume
Setting value from 0 to 31 is described.
13 Input
Signal
Input
signal
・
1280 x 1024
・
1080p 60Hz
etc
When there is no input signal, “space” is described.
14
Status Hardware
error
status
When there is no hardware error, OK is described. When there is hardware error, NG is described.
15
Status Code
Describe the current hardware state and error records as the code.
When there is no hardware error, this is described as “0000 - 0000 - 0000 – 0000”.
When there is some hardware error, the following codes are described.
A. hardware observation result
The hardware error parts are divided by the bit as the following table shown ad described I n the hex.
Bit
0 SYSTEM
POWER1
1 SYSTEM
POWER2
2 SYSTEM
POWER3
3 SYSTEM
POWER4
4 SYSTEM
POWER5
5 BACKLIGHT
6 Touch
Panel
7 - 13
Reserved
bit 0
Bit 15
Example
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 49
16
Status Code
B The number of the decrease of the backlight brightness when the temperature error is occurred.
Described in the double-digits. This is occurred more than 99 times, 99 is described.
When the error report mail is set, the error report mail is send the occurrence of the temperature error. Then,
the number of the backlight brightness is updated. Therefore, this described value is the one right before the
temperature error occurs.
C The accumulated time of the decrease of the backlight brightness when the temperature error is occurred.
Described in the double-digits. This is occurred more than 99 times, 99 is described.
This described value is the one right before the temperature error occurs.
D The number of the move to the sleep mode when the temperature error is occurred. Described in the
double-digits. This is occurred more than 99 times, 99 is described.
The updated value is described.
E This is not used. “0” is described.
17 Temperature
Temperature error existence
Display the temperature error for the hardware. When there is not temperature, “OK” is described. When there
is temperature error, “NG” is described.
18
Temp1
The temperature for the temperature senor 1 is displayed.
Example
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 50
24. NONDISCLOSURE SCREEN OF CONTROLLING THE MONITOR WITH PC (LAN)
The screens described in this chapter are not open to the public.
24-1. SERVICE MENU
For the service menu, the following web access screen is
provided.
This screen is displayed when the following URL is accessed with
a web browser.
http://<IP Address>/service.cgi
On this screen, the following item can be set.
Item
Set value range, remark
COMMAND
When [Send] button is clicked, the RS-232C command
entered to the edit box by the user is sent to this
machine.
The response of the command is displayed in the
lower section of the edit box.
SYSTEM LOG
The system log file of this machine is obtained.
When the anchor is clicked, the file download dialogue
of the browser is displayed.
Follow the instructions of the dialogue.
TEMPERATURE
LOG
The temperature log file of this machine is obtained.
When the anchor is clicked, the file download dialogue
of the browser is displayed. Follow the instructions of
the dialogue.
Display when a command is sent from the edit box of
“COMMAND”
When the command “POWR????” which reads the power status
is sent.
Example of the display when “1” (Power ON status) is sent back
from the display.
Click on the first or last page to see other PN-70TB3 (serv.man4) service manuals if exist.