LL-T1610W (serv.man4). Chapter 3 (Part 1) - Disassembly and reassembly — Sharp Monitor Service Manual (repair manual)

Model
LL-T1610W (serv.man4)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
1.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor / Chapter 3 (Part 1) - Disassembly and reassembly
File
ll-t1610w-sm4.pdf
Date

View Sharp LL-T1610W (serv.man4) Service Manual online

CHAPTER 3. DISASSEMBLY AND REASSEMBLY
[1] Separating LCD and stand
1. Pull the cover 
 downward to remove.
2. Slide the rear arm 
 rearward to remove.
3. Remove the AC adapter 
 and remove the 4 screws 
 securing
the hinge.
Separate the LCD from the stand.
[2] Disassembling and reassembling the
LCD
1. Remove the 5 screws 
 and 2 screws 
 and pull up the rear
panel   in the direction indicated by the arrow, to remove.
2. Remove the 2 screws 
 and remove the sheet 
.
3. Remove the 7 screws 
 and remove the shield plate 
.
4. Remove the 6 screws 
 and remove the inverter PWB cover 
.
2
1
1
2
2
1
2
1
3
1
2
5
3
4
4
2
2

Download Sharp LL-T1610W (serv.man4) Service Manual (Repair Manual)

Here you can view online or download Sharp LL-T1610W (serv.man4) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp LL-T1610W (serv.man4) Monitor. Information contained in Sharp LL-T1610W (serv.man4) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).