DOWNLOAD Sharp LL-H1513 (serv.man19) Service Manual ↓ Size: 1.26 MB | Pages: 32 in PDF or view online for FREE

Adjustments can be made using On Screen
Display (OSD) Menu provided.

If you are using Windows, open the Adjustment
Pattern on the accompanying CD-ROM. (p. 18)
If your system is not Windows, you can not use the
Adjustment Pattern. Therefore display an image
that makes the entire screen light and adjust it
through checking visually its actual tone.
This chapter provides the procedure how to adjust
the screen by using Adjustment Pattern (for
Windows)

1. Press the MENU button.

The COLOR CONTROL Menu will be displayed.

COLOR CONTROL

sRGB

INPUT-2

DIGITAL

1024 x 768

V : 60Hz

H : 48.4kHz

STD

VIVID

COLOR MODE

WHITE BALANCE
HUE
SATURATION

0
0

At this point relevant menu options can be
adjusted.
Each time the MENU button is pressed the next
menu is selected. (COLOR CONTROL 

→ MODE

SELECT 

→ OSD Menu disappears)

Notes:
- The OSD Menu automatically disappears

approximately 30 seconds after the last
command.

COLOR CONTROL

sRGB

INPUT-2

DIGITAL

1024 x 768

V : 60Hz

H : 48.4kHz

STD

VIVID

COLOR MODE

WHITE BALANCE
HUE
SATURATION

0
0

Notes:
- To choose a menu option: SELECT button
- To go to the next menu:

MENU button

COLOR MODE
Color tone can be set as below.

sRGB : sRGB is international standard of color

representation specified by IEC
(International Electrotechnical Commis-
sion). Color conversion is made in
taking account of liquid crystal’s
characteristics and represents color
tone close to it original image.

STD :

Displays image with the color tone
results from original scheme of liquid
crystal panel.

VIVID : Displays an image with dynamic and

VIVID primary colors.

- If [sRGB] or [VIVID] has been selected, items

subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR
MODE] is [STD].

WHITE BALANCE
After selecting [WHITE BALANCE], press the 
button and display the adjustment menu.

WHITE BALANCE

R-CONTRAST
G-CONTRAST
B-CONTRAST

COOL

WARM

USER

STD

OK    [ MENU ]

Notes:
- On settings other than [STD] not all graduations

can be displayed. To display all graduations, set
to [STD].

- Use the     buttons to select [COOL], [·], [STD],

[·], [WARM] or [USER].

- Selecting USER will display the setting values for

[R-CONTRAST], [G-CONTRAST] and [B-
CONTRAST], in order to make fine adjustments.

- Use the SELECT button to select

[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].

- When adjustment complete: MENU button

COOL ... Color tone bluer than standard
   • ......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
   • ......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER

R-CONTRAST .....

  button for blue-green
  button for red

G-CONTRAST .....

  button for purple
  button for green

B-CONTRAST .....

  button for yellow
  button for blue

Hue can be adjusted. (    buttons)

Color saturation can be adjusted. (    buttons)
At the minimum value, the screen is black and
white.

MODE SELECT

INPUT-2

DIGITAL

1024 x 768

V : 60Hz

H : 48.4kHz

INFORMATION

OSD
LANGUAGE
SCALING

3

Notes:
- Depending on the resolution of the input signal,

even if menu options can be selected, the
display may not change.

- To choose a menu option:

SELECT button

- When adjustment complete: MENU button

INFORMATION
A model name, a serial number, and usage time
can be checked. After selecting [INFORMATION],
press the   button.
(When adjustment complete: MENU button)

OSD
After selecting [OSD], press the   button.
(When adjustment complete: MENU button)

OSD H-POSITION:

The position of the OSD display can be moved

to the left and right. (    buttons)

OSD V-POSITION:

The position of the OSD display can be moved

up and down. (    buttons)

OSD PIVOT:

The orientation of the OSD display can be

changed.(    buttons)
  ON ..... Orientation for long height display
  OFF .... Orientation for long width display

The operating functions of the   and 
buttons in the ADJUSTMENT menu are
transposed when the OSD-PIVOT function is
switched from [ON] to [OFF].

LANGUAGE
Messages displayed on the screen and OSD
Menu contents can be changed to the following
languages.

English, German, French, Dutch, Spanish,
Italian, Swedish

1. After selecting [LANGUAGE], press the   button.

The Language Selection Menu will be displayed
on the screen.

2. Select the desired language using the SELECT

button.

3. Press the MENU button.

The Language Selection Menu disappears.

SCALING (Level of scaling)
Adjusts the image to optimum sharpness when

Screen expansion is taken. (    buttons)

Always remove the plug from the AC outlet when
cleaning the monitor.

Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.

Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)

- Never use thinner, benzine, alcohol, glass

cleaner, etc, as this could lead to color change or
change in shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks
or result in malfunction.

If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.

Do not leave the monitor in contact with rubber or
plastic items for long periods of time as this could
lead to color change or change in shape.

If you think the monitor may be faulty, please check
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.

The monitor's florescent tubes have a limited
life span.
- If the screen darkens, persistently flickers or

does not light up, it may be necessary to
replace the florescent tube unit. Please
inquire at the shop where you purchased the
monitor or your nearest Sharp authorized
Service Center. (Never attempt this
replacement on your own.)

- In the initial period of use, due to the

characteristics of florescent tubes the screen
may flicker. (This is not a malfunction.)
Should this happen, check by first turning off
the power, then turning it on again.

No image appears on the monitor (Power LED is
not lit)
- Is the power cord connected properly? (p. 14)

No image appears on the monitor (Power LED is
lit)
- Is the computer connected properly? (p. 13)
- Is the computer turned on?
- Is the signal’s input terminal switched to the

correct one? (p. 15)

- Does the computer's signal timing correspond to

monitor specifications? (p. 26)

- Is the computer in power-saving mode?

Control buttons do not work
- Is the adjustment lock on? (p. 16)

The image appears distorted
- Does the computer's signal timing correspond to

monitor specifications? (p. 26)

- If you are using the analog signal, perform

automatic adjustment. (p. 18)

- If you can change the frequency on the computer

you are using, change the values to a low
frequency count.

No sound can be heard from the headphones
- Is the audio cable connected properly? (p. 14)
- Are the headphones connected properly? (p. 14)
- Perform the volume adjustment procedure.(p. 17)
- When the monitor is in power saving mode, no

sounds will be produced.

The display section does not rotate
- Is the display rotated in the correct direction?
- If there is not sufficient spare length in the

connected cable, it will not be possible to rotate
the display.

The display direction is not changed even after
rotation of the display.
- The operation of switching the display direction

is required.(p. 33)

LCD display

38 cm measured diagonally
Advanced Super-V and Anti Glare Low
Reflection TFT LCD module

Resolution (max.)

XGA 1024 x 768 pixels

Displayable colors (max.)

16.77 million colors (8 bit)

Brightness (max.)

250cd/m

2

Dot pitch

0.297(H) x 0.297(V) mm

Contrast ratio

400:1

Angle of visibility

Left-right 170°; Up-down 170°

Screen display size

Horizontal 304.1 mm x Vertical 228.1 mm

Video signal

Analog: Analog RGB (0.7Vp-p) [75

Ω]

Digital: DVI standard based on 1.0

Sync signal

H/V Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital screening (enlargement VGA/SVGA etc.
to full screen size.)

Plug & Play

VESA DDC1/DDC2B compatible

Power management

VESA: based on DPMS
DVI:

based on DMPM

Input signal terminal

Mini D-sub 15 pin (3row), DVI-I 29 pin

USB hub function

1 upstream port, 2 downstream ports
(selfpowered hub based on USB standard Rev
1.1)

Audio input terminal

Mini stereo jack

Headphone terminal

Mini stereo jack

Height adjustment

Adjustment range: Approx. 60 mm

Screen rotation

Clockwise 0° - 90°

Screen tilt

Upward 0° -30°; downward 0° - 5°

Screen swivel

90° from left through right

Power supply

AC100 - 240V, 50/60Hz

Temperature of operating environment

5 - 35°C

Power consumption

33W (Not using USB hub)
(39W maximum, 3W when in power-saving
mode)

Dimensions (W x D x H) (Units: mm)

With long width screen: 337 x 185 x 355
With long heightscreen: 270 x 185 x 391

Weight

Approx. 5.2kg
Display area only, approx. 3.3kg

337

185

355

270

415

270

391

337

451

238

Analogue signal cable:

Approx. 2.0 m

USB  cable:

Approx. 2.0 m

Audio  cable:

Approx. 2.0 m