DOWNLOAD Sharp LL-151-3D (serv.man2) Service Manual ↓ Size: 1.84 MB | Pages: 127 in PDF or view online for FREE

The monitor is based on the VESA DPMS and the
DVI DMPM standards. To activate the power
management function, the video card and the
computer used with it must also conform to these
standards.

DPMS: Display Power Management Signalling

DMPM: Digital Monitor Power Management

This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or computer. It
transfers information such as degree of resolution
between the monitor and computer. You can use
this function if your computer is DDC compliant
and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.

(DVI-I connector with 29 pins)

1

7

6

5

4

3

2

8

9

15

14

13

12

11

10

16

17

23

22

21

20

19

18

24

C1

C2

C3

C4

C5

No.

Function

No.

Function

1

TMDS data 2-

16 Hot plug detection

2

TMDS data 2+

17 TMDS data 0-

3

TMDS data 2/4 shield 18 TMDS data 0+

4

N.C.

19 TMDS data 0/5 shield

5

N.C.

20 N.C.

6

DDC clock

21 N.C.

7

DDC data

22 TMDS clock shield

8

23 TMDS clock +

9

TMDS data 1-

24 TMDS clock -

10 TMDS data 1+

C1 Analog red image signal

11 TMDS data 1/3 shield

C2 Analog green image signal

12 N.C.

C3 Analog blue image signal

13 N.C.

C4

14 +5V

C5 Analog GND

15 GND

Analog vertically
synchronized signal

Analog horizontally
synchronized signal

DMPM mode

Screen

Power

consumption

ON

Display on

29 W

OFF

Display off

2 W

DPMS mode

Screen

Power

H-sync V-sync

consumption

ON

Display on

Yes

Yes

STANDBY

No

Yes

SUSPEND

Display off

Yes

No

OFF

No

No

29 W

2 W

Depending on the type of computer or OS, you
may need to install the monitor set-up information
on your system. If so, follow the steps below to
install the monitor set-up information. (Depending
on the type of computer or OS, command names
and methods may differ. Please follow the
computer's own operation manual while reading
this.)

About the ICC profile
An ICC (International Color Consortium) profile is
a file that describes the color reproduction
characteristics of the LCD monitor. Using an
application compatible with an ICC profile, highly
accurate color reproduction can be realized.
- Windows 98/2000/Me/XP all use the ICC profile.
- When installing Windows 98/2000/Me/XP set-up

information (described below), the ICC profile is
also installed. If you would like to install the ICC
profile only, please refer to Installing the ICC
profile on page 32.

- When using the ICC profile, set the [WHITE

BALANCE] to [STD] .

Installing monitor set-up information into
Windows 95.
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced Properties], and

[Monitor], then [Change].

5. Click on [Have disk], confirm that [Copy

manufacturer's files from:] is [D:] then click [OK].

6. Confirm that the monitor details are selected,

and click [OK].

7. Check that the monitor details are displayed,

then click [Apply].

8. Click [OK], and close the window.
9. Eject the CD-ROM from the CD-ROM drive.

Installing monitor set-up information into
Windows 98, and setting the monitor's ICC profile
as a predetermined value.
This explanation assumes that the CD-ROM drive
is "D" drive.

If the "Add New Hardware Wizard" has appeared:
1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click [Next].
3. Check [Display a list of all the drivers in a

specific location, so you can select the driver
you want.], then click [Next].

4. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [D:], and click [OK].

5. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish]. If the "Add
New Hardware Wizard" appears, repeat the
installation commands beginning from 2
above.

6. Eject the CD-ROM from the CD-ROM drive.

If the "Add New Hardware Wizard" has not
appeared:
1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Click [Next].
7. Click on [Display a list of all the drivers in a

specific location, so you can select the driver
you want.], then click [Next].

8. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [D:], and click [OK].

9. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed,

then click [Apply].

11. Click [OK], and close the window.
12. Eject the CD-ROM from the CD-ROM drive.

Installing monitor set-up information into
Windows 2000, and setting the monitor's ICC
profile as a predetermined value.
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. Click on [Properties], [Driver] and [Update

Driver].

6. When [Upgrade Device Driver Wizard]

appears, click [Next].

7. Check [Display a list of the known drivers for

this device so that I can choose a specific
driver] and click [Next].

8. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [D:], and click [OK].

9. Select the monitor from the list displayed and

click [Next].

10. Click [Next], confirm that the monitor's name

appears on the screen, and click [Finish]. If
[The Digital Signature Not Found] appears,
click [Yes].

11. Click on [Close].
12. Click [OK], and close the window.
13. Eject the CD-ROM from the CD-ROM drive.

Installing monitor set-up information into Windows
Me, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the CD-ROM drive
is "D" drive.

If the "Add New Hardware Wizard" has appeared:
1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Check [Specify the location of the driver

[Advanced]] and click [Next].

3. Check [Display a list of all the drivers in a

specific location, so you can select the driver
you want.], then click [Next].

4. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [D:], and click [OK].

5. Select the monitor details from the list, then

click [Next], [Next], and [Finish]. If the "Add New
Hardware Wizard" appears, repeat the
installation commands beginning from 2
above.

6. Eject the CD-ROM from the CD-ROM drive.

If the "Add New Hardware Wizard" has not
appeared:
1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Check [Specify the location of the driver

[Advanced]] and click [Next].

7. Check [Display a list of all the drivers in a

specific location, so you can select the driver
you want.] and click [Next].

8. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [D:], and click [OK].

9. Select the monitor details, then click [Next],

[Next], and [Finish].

10. Check that the monitor details are displayed,

then click [Apply].

11. Click [OK], and close the window.
12. Eject the CD-ROM from the CD-ROM drive.

Installing monitor set-up information into Windows
XP, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. Choose [Control

Panel].

3. Switch to "Classic View".
4. Double click on [Display].
5. Click on [Settings], [Advanced] and [Monitor].
6. Click on [Properties], [Driver] and [Update

Driver].

7. When [Hardware Update Wizard] appears,

check [Install from a list or specific location
[Advanced]] and click [Next].

8. Check [Don't search. I will choose the driver to

install.] and click [Next].

9. Click on [Have Disk], confirm that [Copy

manufacturer's files from:] is [D:], and click [OK].

10. Select the monitor from the list displayed and

click [Next].
If [has not passed Windows Logo testing...]
appears, click [Continue Anyway].

11. Confirm that the monitor's name appears on

the screen.

12. Click on [Finish].
13. Click on [Close].
14. Click [OK], and close the window.
15. Eject the CD-ROM from the CD-ROM drive.

Installing the monitor's ICC profile. (If the set-up
information has already been installed, so too has
the profile, and there is no need to install it.)
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings] and [Advanced].
5. Click on [General] and from [Compatibility]

select [Apply the new display setting without
restarting], then click on [Color Management].

6. Click [Add], and select CD-ROM as the file

location.

7. Choose the color profile that you would like to

install, and click on [Add].

8. Choose the profile and click on [Set As

Default].

9. Click [OK], and close the window.
10. Eject the CD-ROM from the CD-ROM drive.

- When using the ICC profile, set the [WHITE

BALANCE] to [STD] .