DOWNLOAD Sharp LL-151-3D (serv.man2) Service Manual ↓ Size: 1.84 MB | Pages: 127 in PDF or view online for FREE

This product is a 3D-ready LCD monitor which
allows users to see stereoscopic images and
videos without using special glasses. You can
switch between 3D mode for stereoscopic (3D)
display and 2D mode for conventional (2D)
display.

Basic principle
In 3D mode, the parallax barrier divides light so
that the right and left eyes of a viewer receive
different lights. Consequently, the viewer can see
stereoscopic images and videos.
In 2D mode, the parallax barrier does not divide
light. Since the right and left eyes of a viewer
receive the same light, the viewer sees
conventional flat images.

Applicable software for displaying 3D images
- Software which supports SHARP 3D Technology
- Other software which supports 3D display

Operating environment for 3D display
- The operation of the software supporting SHARP

3D Technology is guaranteed only on Windows
XP (English version).
Operation in other language versions or other
operating systems is not guaranteed.

- A digital connection is recommended for

connecting to a computer.

- The required operating environment may vary

depending on the software. Be sure to confirm
the operating environment of your software.

Notes:
- SHARP 3D Technology was originally

developed by SHARP to provide a 3D display on
a computer screen.

- If your eyesight greatly differs between the right

and left eye, or if you watch the screen mainly
with a single eye, you may not see stereoscopic
images. Images may or may not be able to see
stereoscopically depending on the displayed
contents.

- 3D effect varies depending on the person.

Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.

To display 3D images with this monitor using the
software supporting SHARP 3D Technology, you
must install the following software on your
computer and connect the computer to the monitor
with a USB cable.

- Sharp Stereo Display Driver

(Driver to control the monitor's display mode
through the USB port)

- Sharp Stereo Display Manager

(Software to manage the monitor's display mode
according to application status)

- Sharp Stereo Display Component

(Software to display 3D images properly with
this monitor)

Start installation with the USB cable disconnected.
For software installation and USB connection
procedures, refer to [ReadmeE.txt] in the [3D],
[SSD], [English] folder in the supplied CD-ROM.

Notes:
- Be sure to follow the installation and connection

procedures described in [ReadmeE.txt].
Otherwise, the installation may fail.

parallax

barrier

backlight

(The light does not pass)

USB cable

USB port

Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.

This software calculates attribute values to display
an image taken with a stereo camera on the
screen of this monitor.

How to install
1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Double click on [CamCalc.exe] in the [3D],

[3DSOFT], [SLE], [English] folder.

3. Follow the instructions displayed on the screen

to complete the procedure.

How to use
Refer to [User Guide] by clicking on the [Start]
button, and choosing [SHARP SmartStereo
Calculator] from [All Programs].

Install the following software from the supplied
CD-ROM as necessary after installing the SHARP
Stereo Display.

Note:
- If you want to install the following software,

install the SHARP Stereo Display first.

Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.

This software supports SHARP 3D Technology. It
converts images, taken with a digital camera, etc.,
using a stereo lens adapter, into a format which
can be displayed in 3D with this monitor.
Available style is Side-by-Side and Left/Right
Independent.

How to install
If Microsoft.NET. Framework is not installed in your
computer, install it before installing this software.
In the CD-ROM, double click on [dotnetfx.exe] in
the [3D], [3DSOFT], [dotnet], [English] folder, and
follow the instructions displayed on the screen to
complete the procedure.

1. Load the supplied CD-ROM into the CD-ROM

drive of the computer.

2. Double click on [PhotoEditor.exe] in the [3D],

[3DSOFT], [SLE], [English] folder.

3. Follow the instructions displayed on the screen

to complete the procedure.

How to use
Refer to [SHARP SmartStereo Photo Editor User
Guide] or [SHARP SmartStereo Slide Show User
Manual], by clicking on the [Start] button, and
choosing [SHARP SmartStereo Photo Editor] from
[All Programs].

Side-by-Side

Left/Right independent

Left

image

Right

image

Left

image

Right

image

(File1)

(File2)

- Set the screen resolution to 1024 x 768.

It is unable to display 3D image with other
setting.

- Be sure to connect the USB cable while the

monitor and computer are turned off. Then, turn
on the monitor first and finally turn on the
computer.

- Do not connect/disconnect the USB cable while

the computer and/or monitor are turned on.
Otherwise, a malfunction may result.

- Do not select 3D mode unless you display 3D

images.

- If you select 2D mode while displaying a 3D

image, the image may not display properly.

- For analog connection, adjust the screen

properly using the automatic screen adjustment,
etc.

- If the OSD Menu is hard to see in 3D mode,

select 2D mode to make adjustments.

- Also refer to [ReadmeE.txt] in the [3D], [SSD],

[English] folder in the supplied CD-ROM.

For software supporting SHARP 3D Technology
- The 3D display may be disabled when two or

more users are logged on. In this case, let all
users log off, and then log on as the user who
logged on first.

To see images in 3D mode, there should be
approximately 60 cm between you and the screen
and you should be positioned in front of the
screen. Straighten your back and direct both eyes
so that you are looking straight at the screen.

Guideline for proper viewing position
In 3D mode, a red strip is displayed at the bottom
of the screen. The best viewing position in 3D
mode is the position where the entire red strip (or
its bottom) appears darkest. Move your head
slightly up/down, right/left, and forward/backward
to adjust your position.

Note:
- With software that does not display a full screen,

the red strip may not display at the bottom of the
screen.

For software supporting SHARP 3D Technology
When you display a 3D image with 3D display-
ready software, the display mode is automatically
switched to 3D mode and the power LED color
changes to blue. When you display a 2D image,
the display mode returns to 2D mode and the
power LED color changes back to green.
If the display mode does not automatically switch
to 3D mode, press the 3D button to switch the
mode.
(When the 3D button is pressed again, the mode
returns to 2D mode.)

Notes:
- When 3D mode is selected by pressing the 3D

button, the mode may automatically return to 2D
mode after the monitor resumes from power-
saving mode.

- After the 3D mode is activated by pressing the

3D button, if the monitor is turned off once and
turned on again, the mode returns to 2D mode.

For other software supporting 3D display
Confirm details by referring to the operation
manual of the software.

Always remove the plug from the AC outlet when
cleaning the monitor.

Cabinet and control panel section
Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.

LCD panel section
Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)

- Never use thinner, benzine, alcohol, glass

cleaner, etc, as this could lead to color change
or change in shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks
or result in malfunction.

If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.

- Do not leave the monitor in contact with rubber

or plastic items for long periods of time as this
could lead to color change or change in shape.

If you think the monitor may be faulty, please check
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest SHARP authorized Service Center.

The monitor's fluorescent tubes have a limited
life span.
- If the screen darkens, persistently flickers or

does not light up, the fluorescent tube has
reached the end of its operational life span.
Please inquire at the shop where you
purchased the monitor or your nearest
SHARP authorized Service Center.

- In the initial period of use, due to the

characteristics of fluorescent tubes the screen
may flicker. (This is not a malfunction.) Should
this happen, check by first turning off the
power, then turning it on again.

No image appears on the screen (power LED is
not lit).
- Are the AC adapter and power cord connected

properly? (p.14)

No image appears on the screen (power LED is lit).
- Is the computer connected properly?

(p.13)

- Is the computer turned on?
- Does the computer's signal timing correspond to

monitor specifications? (p.28)

- Is the computer in power-saving mode?

Control buttons do not work.
- Is the adjustment lock on? (p.16)

The image appears distorted.
- Does the computer's signal timing correspond to

monitor specifications? (p.28)

- If you are using the analog signal, perform

automatic screen adjustment. (p.17)

- If you can change the refresh rate on the

computer you are using, change the value to a
lower frequency. (p.28)

No sound can be heard from the speakers.
- Is the audio cable connected correctly? (p.14)
- Perform the volume adjustment procedure. (p.16)
- Are the headphones connected?
- There is no sound from the speakers when the

monitor is in power-saving mode (the power
LED lights up orange).