Sharp LL-151-3D (serv.man2) User Manual / Operation Manual ▷ View online
17
English
Deutsch
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Adjusting the screen display
Adjusting the screen automatically
1. Press the MENU button.
The ADJUSTMENT Menu will be displayed.
1 0 2 4 x 7 6 8
H : 4 8 . 3 k H z
V : 6 0 H z
1 2 8
1 6
1 2 8
2 7
2. Press the button.
The screen will become dark and [ADJUSTING]
will be displayed. After a few seconds the
ADJUSTMENT Menu will return. (The automatic
adjustment is now complete.)
will be displayed. After a few seconds the
ADJUSTMENT Menu will return. (The automatic
adjustment is now complete.)
3. Press the MENU button 4 times to make the OSD
(On Screen Display) Menu disappear.
Notes:
- In most cases automatic adjustment is sufficient.
- It may not be possible to achieve correct
- In most cases automatic adjustment is sufficient.
- It may not be possible to achieve correct
adjustment with the first automatic adjustment. In
such a case, try repeating the automatic
adjustment 2 or 3 times.
such a case, try repeating the automatic
adjustment 2 or 3 times.
- If necessary due to any of the following, manual
adjustments (p.18) can be performed after the
automatic adjustment.
- When further fine adjustment is needed.
- When [OUT OF ADJUST] is displayed. (When
automatic adjustment.
- When further fine adjustment is needed.
- When [OUT OF ADJUST] is displayed. (When
the screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be
sure to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)
automatic screen adjustment may be disabled.
When making an automatic adjustment, be
sure to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)
- Automatic adjustment may not be achieved
correctly depending on what is displayed on the
screen - moving pictures or the MS-DOS prompt
etc.
screen - moving pictures or the MS-DOS prompt
etc.
Automatic screen adjustment
(When using an analog signal)
(When using an analog signal)
Options in the ADJUSTMENT Menu can be
adjusted automatically (CLOCK, PHASE, H-POS,
V-POS).
adjusted automatically (CLOCK, PHASE, H-POS,
V-POS).
Notes:
- When setting up this monitor for the first time or
- When setting up this monitor for the first time or
after having changed an aspect of the current
system, perform an automatic screen adjustment
before use.
system, perform an automatic screen adjustment
before use.
- Automatic screen adjustment is unnecessary
when the monitor is used with a digital
connection. Perform manual screen adjustment
when necessary. (p.18)
connection. Perform manual screen adjustment
when necessary. (p.18)
Screen display for adjustment
First display an image that makes the entire
screen light.
If you are using Windows, you can use the
Adjustment Pattern on the supplied CD-ROM.
screen light.
If you are using Windows, you can use the
Adjustment Pattern on the supplied CD-ROM.
Opening the Adjustment Pattern (for Windows)
This explanation is for Windows 95/98/2000/Me/
XP, and assumes that the CD-ROM drive is "D"
drive.
1. Load the supplied CD-ROM into the CD-ROM
This explanation is for Windows 95/98/2000/Me/
XP, and assumes that the CD-ROM drive is "D"
drive.
1. Load the supplied CD-ROM into the CD-ROM
drive of the computer.
2. Open [My Computer] and select CD-ROM. If
using Windows 3.1, open [File Manager] and
choose "D" drive.
choose "D" drive.
3. Double click on [Adj_uty.exe] to run the
Adjustment Program. The Adjustment Pattern will
appear.
appear.
Adjustment Pattern
After completing the adjustments, press the
computer's [Esc] key to exit the Adjustment
Program.
computer's [Esc] key to exit the Adjustment
Program.
Note:
- If your computer's display mode is set to 65K
- If your computer's display mode is set to 65K
colors, you may see the different color levels in
each color pattern or the gray scale may look
colored. (This is due to the specification of the
input signal and is not a malfunction.)
each color pattern or the gray scale may look
colored. (This is due to the specification of the
input signal and is not a malfunction.)
18
ADJUSTMENT Menu
When the monitor is used with a digital connection,
this menu adjustment is not necessary.
this menu adjustment is not necessary.
AUTO
When [AUTO] is selected with the button, the
[CLOCK], [PHASE], [H-POS] and [V-POS] settings
are automatically adjusted.
When [AUTO] is selected with the button, the
[CLOCK], [PHASE], [H-POS] and [V-POS] settings
are automatically adjusted.
CLOCK
The figure below demonstrates how to adjust so
that vertical flicker noise is not emitted.
The figure below demonstrates how to adjust so
that vertical flicker noise is not emitted.
( buttons)
PHASE
The figure below demonstrates how to adjust so
that horizontal flicker noise is not emitted.
( buttons)
Note:
- Adjustments to [PHASE] should be made only
The figure below demonstrates how to adjust so
that horizontal flicker noise is not emitted.
( buttons)
Note:
- Adjustments to [PHASE] should be made only
after [CLOCK] has been correctly set.
H-POS (horizontal positioning) and V-POS
(vertical positioning)
To center the Adjustment Pattern within the
boundaries of the screen, adjust the left-right (H-
POS) values and the up-down (V-POS) values.
(vertical positioning)
To center the Adjustment Pattern within the
boundaries of the screen, adjust the left-right (H-
POS) values and the up-down (V-POS) values.
( buttons)
Manual screen adjustment
1. Display an image that makes the entire screen
light. (p.17)
2. Display the OSD Menu by pressing the MENU
button.
ADJUSTMENT Menu
1 0 2 4 x 7 6 8
H : 4 8 . 3 k H z
V : 6 0 H z
1 2 8
1 6
1 2 8
2 7
MENU
GAIN CONTROL Menu
1 0 2 4 x 7 6 8
6 4
6 4
6 4
H : 4 8 . 3 k H z
V : 6 0 H z
MENU
WHITE BALANCE Menu
H : 4 8 . 3 k H z
V : 6 0 H z
1 0 2 4 x 7 6 8
MENU
MODE SELECT Menu
1 0 2 4 x 7 6 8
3
H : 4 8 . 3 k H z
V : 6 0 H z
MENU
The OSD Menu closes.
Notes:
- When the monitor is used with a digital
- When the monitor is used with a digital
connection, ADJUSTMENT and GAIN
CONTROL Menu adjustments are not necessary.
CONTROL Menu adjustments are not necessary.
- The OSD Menu automatically disappears
approximately 30 seconds after the last command.
- This chapter provides the procedure how to
adjust the screen by using Adjustment Pattern
(for Windows).
(for Windows).
Adjusting the screen display
Screen frame
Vertical flicker noise
Horizontal flicker noise
Adjustment
Pattern
Select the
option by
pressing the
option by
pressing the
button.
Select the
option by
pressing the
option by
pressing the
button.
Select the
option by
pressing the
option by
pressing the
or the
button.
Select the
option by
pressing the
option by
pressing the
button.
19
English
Deutsch
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Adjusting the screen display
WHITE BALANCE Menu
COOL ... Color tone bluer than standard
• .......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
• .......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER
• .......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
• .......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER
- Selecting [USER] will display the setting
values for [R-CONTRAST], [G-CONTRAST]
and [B-CONTRAST], in order to make fine
adjustments.
and [B-CONTRAST], in order to make fine
adjustments.
- Use the
button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
[B-CONTRAST].
R-CONTRAST .....
button for blue-green
button for red
button for red
G-CONTRAST .....
button for purple
button for green
button for green
B-CONTRAST ......
button for yellow
button for blue
button for blue
Note:
- On settings other than [STD] not all gradations
- On settings other than [STD] not all gradations
can be displayed. To display all gradations, set
to [STD].
to [STD].
GAIN CONTROL Menu
When the monitor is used with a digital
connection, this menu adjustment is not
necessary.
connection, this menu adjustment is not
necessary.
AUTO
When [AUTO] is selected with the button, the
[BLACK LEVEL] and [CONTRAST] settings are
automatically adjusted. After the automatic
adjustment, perform manual adjustment when
necessary.
When [AUTO] is selected with the button, the
[BLACK LEVEL] and [CONTRAST] settings are
automatically adjusted. After the automatic
adjustment, perform manual adjustment when
necessary.
BLACK LEVEL
Total screen brightness can be adjusted while
watching the color pattern. ( buttons)
Total screen brightness can be adjusted while
watching the color pattern. ( buttons)
CONTRAST
While watching the color pattern, adjustments can
be made so that all gradations appear.
( buttons)
While watching the color pattern, adjustments can
be made so that all gradations appear.
( buttons)
Notes:
About AUTO (Auto Gain Control function)
- The Auto Gain Control adjusts contrast and
About AUTO (Auto Gain Control function)
- The Auto Gain Control adjusts contrast and
black level based on the brightest and darkest
colors of the image displayed.
colors of the image displayed.
- If you are not using the Adjustment Pattern it is
necessary to have black area and white area of
at least 5 mm x 5 mm on the screen. Adjustment
may not be possible without those areas.
at least 5 mm x 5 mm on the screen. Adjustment
may not be possible without those areas.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
Color pattern
20
MODE SELECT Menu
Note:
- Depending on the resolution of the input signal,
- Depending on the resolution of the input signal,
even if menu options can be selected, the
display may not change.
display may not change.
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to
The position of the OSD Menu can be moved to
the left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up
and down. ( buttons)
The position of the OSD Menu can be moved up
and down. ( buttons)
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
The sharpness of the image can be adjusted.
( buttons)
Note:
- When an image area with a resolution smaller
Note:
- When an image area with a resolution smaller
than 1024 x 768 pixels is selected, it is enlarged
to cover the whole screen (i.e. the side ratio of
the display may change).
to cover the whole screen (i.e. the side ratio of
the display may change).
LANGUAGE
You can choose the language used in OSD Menu.
1. Press the button.
You can choose the language used in OSD Menu.
1. Press the button.
The Language Selection Menu will be displayed
on the screen.
on the screen.
2. Use the
button to choose a language.
3. Press the MENU button.
Adjusting the screen display
Click on the first or last page to see other LL-151-3D (serv.man2) service manuals if exist.